How big is the oil pump on a Nissan 300ZX?
Torque the bolts to 4.6-6.1 ft lbs (0.64-0.85 kg-m). Install the front oil pump seal provided in the gasket kit. Place the open (spring) side toward the oil pump and slip it over the crankshaft.
How to line up the crankshaft on a Nissan 300ZX?
Line up the crankshaft with the hole in the oil pump. There are flat spots on the crank that need to be aligned before the oil pump will slide on. (yellow in Image 3) Position the oil pump on the positioning pins. (green in Image 3 ) Image 3. Bolt down the oil pump.
Which is the best engine oil for a 300ZX?
The most important consideration to keep in mind when choosing the type of engine oil for your 300ZX is that it should be a high-zinc oil. For a high performance vehicle such as the 300ZX, it is highly recommended that you use a high-zinc oil which provides wear protection in areas of increased friction.
How do you change oil seal on Nissan 300ZX?
Place the open (spring) side toward the oil pump and slip it over the crankshaft. Get it roughly in place and then put the old seal (if you still have it) over the new one and use a blunt object like a punch to knock the seal into place, using the old seal to absorb the blows. Image 4 shows the seal in place.
Do you need an oil change on a Nissan 300ZX?
The 300ZX’s VG (or RB) series engine needs regular oil changes like any other car. Fortunately, this is something you can do yourself as opposed to taking it to the shop to get done. This guide will serve as a reference for engine oil type, weight, temperature differences, and more.
What’s the best way to check a Nissan 300ZX?
The easiest way of checking codes is using the Consult system. You can do this with a computer and a BlaZt Cable, for example. Software includes Conzult, Nissan Datascan, and several others. I’ll show this using Nissan Datascan (since that’s what I have).
How to turn off the ECU on a Nissan 300ZX?
Remove the four 10mm bolts holding the wooden ECU cover down, and remove the wooden cover. c. Turn the key to the “ON” position (don’t start it). d. Turn the potentiometer on the ECU all the way to the right (clockwise). Don’t over-turn it, it doesn’t take much effort to turn at all, and the light will turn off. e.
Where is the consult connector on a Nissan 300ZX?
Locate the Nissan CONSULT Connector. It’s a gray connector on the driver’s side right next to the hood pull lever. If you can’t seem to find it, fish around behind the trim piece a little, as it may have popped off its post in the past.