Where is the fuel pump relay on 2008 Nissan Titan?
It can be found near the fuel injectors along the fuel line. If the fuel pump replay proves to be faulty, You cannot replace it. Instead, You will have to replace the entire module. This can be ordered from an automotive parts and accessories retail store.
Where is the fuel pump relay located in a Nissan?
– IPDM E/R (Intelligent Power Distribution Module Engine Room) integrates the relay box and fuse block which were originally placed in engine compartment.
What to do if your fuel pump wont turn on?
First check fuse 48, a 15 amp, in the under-hood fuse box. Next, remove the fuel pump relay from that box and check for voltage on the terminals in the socket. Two of them must have 12 volts when the ignition switch is on. If that’s what you find, try swapping that relay with a different one like it, then see if the pump turns on.
What happens if the fuel pump relay fails?
The fuel pump relay is part of a power module under the hood. In that module are several relays but the bad news is they are not serviceable as the entire module has to be replaced if the fuel pump relay has failed.
Can a fuel pump run with the ignition switch on?
The fuel pump had better not run with just the ignition switch turned on. To do so would pose a serious fire hazard if a fuel line got ruptured in a crash. The pump should only run for one or two seconds after you turn on the ignition switch to insure pressure is up for starting.
Where is the fuel pump fuse on a Nissan Titan?
Open the IPDM and find the fuel pump fuse, which is the seventh fuse from the passenger’s side, in the top row of fuses. Pull this fuse with a slight wiggling motion to remove it. Set the fuse in a secure location for future re-installation.
Why does my Nissan Titan have low fuel pressure?
The 2006 Titan came equipped with the same 305-horsepower, 5.6-liter V-8 engine that its debut model had and this engine, just as all internal combustion engines, requires a specific amount of fuel pressure to operate correctly. Low fuel pressure can cause rough idle, misfiring, reduced power or may cause the vehicle not to run at all.
– IPDM E/R (Intelligent Power Distribution Module Engine Room) integrates the relay box and fuse block which were originally placed in engine compartment.
What kind of engine does a Nissan Titan have?
Its entry was the 5.6-liter-powered Titan, and with a name like that, Nissan was certainly calling its shot. The 2006 Titan came equipped with the same 305-horsepower, 5.6-liter V-8 engine that its debut model had and this engine, just as all internal combustion engines, requires a specific amount of fuel pressure to operate correctly.