Why is my gear loose?
Generally, most all gear shifters will become loose due to aggressive gear changing from the gear shifter. Aggressive gear changing can cause damage to the bushing on the bottom of the gear shifter lever. Once the bushing is damaged, it will cause slack in the gear shifter.
What to do when your gear shifter is loose?
The lower gear shifter bushing will have to be replaced to remove the looseness of the gear shifter. The gear shifter is connected to the transmission linkage underneath the gear shifter console. Generally, most all gear shifters will become loose due to aggressive gear changing from the gear shifter.
What happens when the shifter cable is out of adjustment?
If the cable is out of adjustment, you’ll experience the same symptoms as you would if the cable was stretched. If the transmission is stuck in any gear except neutral or park, and is equipped with a park-neutral safety switch on the interior shifter assembly, the vehicle will lunge forward or backward if you try to start the engine.
How to install a new rear gear cable?
Some of the fuzzy logic used by the component manufacturers means some of the simple steps, like threading the new inner cable through the shifter mechanism, is a pain unless you take the shifter off the bars. So, deep breath and let’s fit this new rear gear cable. 1 Unfasten the old cable Fully down shift the rear gears.
How does the third shift cable work on a manual transmission?
Moving your shifter left or right pushes or pulls the other cable, moving the shifter assembly up and down. If you have a six-speed manual transmission, your vehicle may have a third shift cable that moves a lock-out lever.
The lower gear shifter bushing will have to be replaced to remove the looseness of the gear shifter. The gear shifter is connected to the transmission linkage underneath the gear shifter console. Generally, most all gear shifters will become loose due to aggressive gear changing from the gear shifter.
Where can I find a gear shifter bushing?
The bushing for the gear shifter lever can be found at most all auto parts stores. Do not shift the gear shifter in an aggressive manner to prevent looseness and slack within the gear shift. Fix a loose gear shifter lever as soon as possible to prevent the gear shifter lever from breaking in half.
How do you change the cable in a GripShift?
Apply a tiny dab of grease to the grooves where the cable sits inside the shifter. Slide the new cable back into the shifter, loosely wrap it around once, and then slide it through the shifter body. Now pull the cable tight and set it down into the shifter grooves the same way it came out.
What to do when you need to replace transmission cable?
Turn the shifter to the highest gear if you’re replacing the rear cable, or the lowest gear if you’re replacing the front. You’ll notice a small allen bolt on the outside of the shifter body. Loosen this off but don’t un-thread it completely as they are really easy to lose.