What is the OBD code for bank 1 camshaft?
P0017 is the OBD-II generic code indicating that the crankshaft and camshaft position sensor for bank 1 exhaust camshaft do not correlate signals with each other.
Which is Bank 1 on a car engine?
The “A” camshaft is either the intake, left, or front camshaft. This code is specific to bank 1. Bank 1 is the side of the engine that contains cylinder #1.
How does the Camshaft Position Sensor ( CMP ) work?
The camshaft position sensor (CMP) is used to determine the position of the camshaft (s). It relays this information to the powertrain control module (PCM). The PCM then uses this information to control the fuel injectors, and on some applications, for ignition timing.
What to do if you have sludge in bank 1 intake?
If there isn’t any sludge, consider checking the Bank 1 Intake Camshaft Oil Control Valve for proper function. You can do this by removing the Oil Control valve and supplying power and ground to the solenoid quickly using a pair of fused jumper wires.
What does Bank a mean on an intake camshaft?
Different manufactures use these terms but both systems are the same. You have an intake camshaft solenoid error usually. Not manufacturer specific, is a generic code. Bank A or bank 1 if a 4 cylinder engine. Depending on the type of engine if you have two banks then will have a bank 2 error. Then go into a P0021 code situation.
What is the camshaft timing on Bank 2?
But on engines with 2 banks, (V engines) this condition on bank 2 will store a P0012 code. Remember, bank 1 is always the side where the number 1 cylinder is housed. This is true even on four cylinder inline engines. The opposite codes (Retarded Camshaft Timing) are P0012 and P0022 respectively.
What does Bank 1 and sensor B mean?
Bank 1 is the side of your engine that has the cylinder 1, while sensor B refers to the exhaust camshaft side. Some car manufacturers have their own description of the P0017 code, such as GM (more specifically, Chevrolet ). P0017 on Chevy vehicles translates to Crankshaft Position – Exhaust Camshaft Position Not Plausible.
What do you call an intake camshaft solenoid error?
You have an intake camshaft solenoid error usually. Not manufacturer specific, is a generic code. Bank A or bank 1 if a 4 cylinder engine. Depending on the type of engine if you have two banks then will have a bank 2 error.