How does the Nissan NATS system work?
The Nissan Anti-Theft System (NATS) or Nissan Vehicle Immobilizer System (NVIS) is an integrated anti-theft system that prevents the engine from starting unless a registered key is used. Because the NATS logic built into the ECM, it’s virtually impossible to bypass.
What is NATS key?
The Nissan immobiliser systems were introduced in 1995. As soon as you put the ignition on, the Nissan immobiliser system will read the key if the transponder data doesn’t match the stored data in the ECU, the car will not start. This system was known as NATS 1.
How to turn on Nissan key fob Nats system?
Ensure all the doors have been unlocked, either by using a good transponder key or remote control key. Procedure 1. Turn the ignition switch from Position 0 to ON 6 times within 10 seconds. 2. Then turn ignition switch to OFF position. Leave key in ignition switch. 3. After 2seconds, the system will enter programming mode and will flash the warning
How does the Nats system work on a Nissan?
The NATS immobiliser controls signals to the Engine Control Module (ECM) which inhibit starting. On later systems there is also an input from the Audio system, which if disconnected inhibits the starting of the vehicle. NATS SECURITY INDICATOR Thesecurity LED is normally mounted in the dashboard area and indicates the status of the system.
Is there Pin code for Nissan Patrol Key Reader?
Further iterations of the NATS system have been introduced, up to NATS 6.5. The earlier systems use a security timed access, similar to Ford systems, which require a period of time before the keys can be programmed. NATS 5 uses a pin code, as with GM and VAG systems. This system was fitted on vehicles from 2001 MY onwards.
When did Nissan Micra start using NATs 5?
access, similar to Ford systems, which require a period of time before the keys can be programmed. NATS 5 uses a pin code, as with GM and VAG systems. This system was fitted on vehicles from 2001 MY onwards. A further development is the introduction of a CAN system that was first introduced on the Micra in 2003. The Micra system
Ensure all the doors have been unlocked, either by using a good transponder key or remote control key. Procedure 1. Turn the ignition switch from Position 0 to ON 6 times within 10 seconds. 2. Then turn ignition switch to OFF position. Leave key in ignition switch. 3. After 2seconds, the system will enter programming mode and will flash the warning
The NATS immobiliser controls signals to the Engine Control Module (ECM) which inhibit starting. On later systems there is also an input from the Audio system, which if disconnected inhibits the starting of the vehicle. NATS SECURITY INDICATOR Thesecurity LED is normally mounted in the dashboard area and indicates the status of the system.
How can I reset the Nats lock mode?
To reset a NATS lock mode, a proper key must be cycled three times again to get the car to start, explaining why with even using the original key, it took three tries to start. For now, I’m assuming that the key transponder in the replacement key became damaged or corrupted somehow. I have not had issues since using the original key again.
What do you need to know about Nissan anti-theft system?
Overview of the Nissan Anti-Theft System (NATS) This Website provides information needed for the purchase of key codes, immobilizer reset codes and the equipment needed to prepare the products needed to gain access to a vehicle and programming needed to facilitate the starting of the vehicle.