Do scooters have starter motor?
Many mopeds and scooters also carry both a kick start and an electric start, the former being useful in case the latter fails, as scooter and moped batteries tend to be smaller and, as a result, run down much faster than other forms of automotive batteries.
Where does the starter motor go on a Piaggio?
5) Remove the starter motor from the engine and connect it directly to your known good battery source from step 3) with jump leads. Connect the battery -ve terminal to the starter metal body and the starter connection terminal (normally a spade connector) directly to the battery +ve terminal. Be careful!
What is the manual for a Piaggio scooter?
Some PIAGGIO Scooter Manuals PDF & Wiring Diagrams are above the page – NRG, Typhoon, ZIP, Power, DD, DT, Purejet . The Piaggio concern was founded in 1884 and was engaged in the production of ships, aircraft and equipment for industry.
Where does the Black Wire connect to the starter motor?
The black ground wire connects directly from the battery -ve terminal to either the starter motor body or to the engine block to which the starter motor is electrically connected through its mounting bolts.
Who was the founder of the Piaggio company?
The Piaggio concern was founded in 1884 and was engaged in the production of ships, aircraft and equipment for industry. After the war ended, Enrico, the son of the founder of the company, Rinaldo Piaggio, decided to start production of light 2-wheeled vehicles, which are so necessary for the poor state recovering from hostilities.
What kind of starter motor does Piaggio moped use?
This blog covers the testing and fault finding of starter motor electrical problems for all Piaggio/ Gilera 50cc 2-stroke mopeds. This guide can largely be applied to most other mopeds from different manufacturers, however the low current circuit operating the starter relay is slightly different for other manufacturers.
Where is the starter terminal on a Piaggio?
Connect the battery -ve terminal to the starter metal body and the starter connection terminal (normally a spade connector) directly to the battery +ve terminal. Be careful! The starter motor will try to jump out of your hands if it operates, secure it suitably in a vice. Be very careful not to short out the cables.
What to do if your Piaggio starter is not working?
4) Connect a jump lead from the battery -ve terminal directly to the starter motor metal body and repeat steps 2) and 3). If the starter now operates with this jump lead but not without it, this indicates a problem with the thick black earth cable which runs from the battery -ve terminal to the engine casing.
What do you need to start a Piaggio scooter?
The starter relay is the component (normally brown for Piaggio) shown in the next photo down the page. 2) Unplug the 2 thick red wires from the starter relay and join them together with something suitable like spade connectors or bridge them with a piece of thick wire. Don’t allow the red wires to touch anything else including the scooter frame.