Why is my John Deere mower bogging down?
After the engine warms, the choke opens and a normal air-to-gasoline mixture moves through the carburetor. If the choke sticks shut, the mower runs poorly, and it could stall or bog down as you mow. You can clean the choke and its linkages, which should free it up.
Why does my lawn mower die when the blade is engaged?
Sounds stupid, but check the fuse in the charging circuit in fuse panel. If blown or even partially melted., replace. Sometimes this will cause the problem. Just posting this in case someone has the same issue. My mower would run fine without the blades engaged, but when I tried to cut grass i would lose power.
What causes lawn mower to lose power when cutting uphill grass?
Maybe your hillside lawnmower is capable of mowing on the level ground but you want to cut uphill grass – it will lose power when blades engaged. Or if there is too much weight on it while mowing the uphill grass, the same thing may happen.
What happens when you engage the deck lever on a riding mower?
When you engage the deck lever, it releases the blades brakes allowing the spindles to be spun by hand. If the mandrels do not move freely, check for something wrapped around the blades. If you do not see anything wrapped around the blades, I would suspect the bearings in the mandrels are locked up.
Why does my riding mower bog down in the grass?
Dull blades don’t cut well and can lead to your mower bogging down in thick grass. Also, dull mower blades damage your turn and can lead to diseases or insect problems. You can look at your turf to get some idea of how well your mower blades are cutting.
Why does my lawn mower lose power while cutting grass?
You may not face any such trouble while mowing on the level ground, but while mowing on the uphill or slope, it may sputter and sometimes lose power when blades engaged. So, the cases may vary in some way but the reasons are pretty much the same. Once you know why this is happening, you can take action to fix the problem.
What causes a lawn mower to bog down when the blades are engaged?
Several issues with the air and fuel delivery system can cause your mower to bog down when the blades are engaged. Among the most common problems with the air and fuel delivery systems are: Dirty Air Filter – A dirty air filter may stop your engine from running at full speed and cause bogging down.
What should I do if my lawn mower blade is too tall?
If you realize that the grass is tall, then adjust the cutting height. Cleaning the blade can help to fix power loss issues. Read the manufacture’s manual and follow the instructions that outline how cleaning of mower’s blade should be done.
How do you engage the blades on a riding mower?
Park the tractor on a level surface and remove the key. That way no accidents happen. I recommend removing the deck belt from the engine pulley and then lift the lever to engage the blades. When you engage the deck lever, it releases the blades brakes allowing the spindles to be spun by hand.