How long does it take to install a new top?
Although it typically only takes about 1-2 hours to take the old top off, it can take many hours or even days to clean things up. Then, once you have finished cleaning and preparing the frame you can figure on 6-8 hours to install the new top. It is imperative to confirm proper fit and placement before beginning the installation.
Can a springer front end be used on a Softail?
Installation of the FLSTS Springer front end on anything other than Softail models could lead to possible personal injury. Do not install on three-wheeled vehicles of any kind. This kit is designed for use with the supplied 16 in. front wheel. Do not use any other front wheel with this kit.
How to do a Harley top end overhaul?
Harley top end overhaul is a lengthy procedure on your Twin Cam motor. Follow Mike’s instructions and refer to your service manual. You will see that a lengthy job does not necessarily make it a difficult job. By taking your time, focusing, working clean and orderly, you will find yourself moving right through this detailed repair or upgrade.
Where is the Softail on a Harley Davidson?
Softail Shock Adjustment. Positioned horizontally under the motorcycle, the shock is mounted to the frame in the front of the bike and to the swing arm in the rear. As the shock compresses, the bike gets taller. As the shock extends, the bike stands lower. The rear shock spring preload may be adjusted to the total load,…
Can You rebuild a Softail shock on a Harley Davidson?
You will need to do this on the ground per the manual. Safety is always the first thing when working on your motorcycle. If you find your Softail shock adjustment does not do the trick, you can rebuild them with the help of this video.
Installation of the FLSTS Springer front end on anything other than Softail models could lead to possible personal injury. Do not install on three-wheeled vehicles of any kind. This kit is designed for use with the supplied 16 in. front wheel. Do not use any other front wheel with this kit.
What kind of wrench do I need for softtail shock adjustment?
Softtail Shock Adjustment You will need a spanner wrench (Harley Davidson part # 94448-82B) and a large 1-1/16″ wrench. The 1-1/16″ wrench is used for the jam nut. It is a good idea to purchase a cheap 1-1/16″ wrench that can be cut shorter to access the jam nut.