How do you change the oil in a 1999 Harley Softail?
Start the motor and loosen the oil filter until a thin bead of oil begins to seep out from between the motor and the filter. Tighten the filter by hand and stop the motor. Wipe away any oil spills with a shop towel. Warm the motor before draining the oil.
How do you check the oil level on a Harley Davidson?
Now, remove the dipstick/fill plug and view the oil level. The transmission oil level is correct when between the Add and Full marks on the dipstick. Checking oil on Harley is similar however there is the option to check the oil level on the kickstand or with the vehicle upright. Again, start with the motorcycle already warm.
What kind of oil does a 1999 Softail use?
The 1999 Softail series uses the same Twin-Cam 88 motor used in recent models, lubricated by three separate fluids for the engine, transmission, and primary. However, many riders are uncertain of how to to change the motorcycle’s engine oil, due mostly to the apparent absence of an oil drain plug.
What should the oil pressure be on a Harley Davidson?
If you could shed any light on this matter I would greatly appreciate it. Those oil pressure numbers are typical for your m/c. If the motor rebuild is unknown, or questionable, we suggest inspecting your cam chain tensioners. If you are interested in looking into keeping your oil cooler; check out Love Jugs.
Start the motor and loosen the oil filter until a thin bead of oil begins to seep out from between the motor and the filter. Tighten the filter by hand and stop the motor. Wipe away any oil spills with a shop towel. Warm the motor before draining the oil.
What are the oil lines on a Harley Davidson?
Harley Davidson oil flow diagram related problems. Ask your Harley Davidson oil flow diagram questions. Get free help, advice & support from top Harley.40 Micron – H-D Part #A (standard Evo filter) Oil Lines – The oil lines connecting the Smart Pump to the oil filter operate under high pressure and are colored RED in the diagram.
Now, remove the dipstick/fill plug and view the oil level. The transmission oil level is correct when between the Add and Full marks on the dipstick. Checking oil on Harley is similar however there is the option to check the oil level on the kickstand or with the vehicle upright. Again, start with the motorcycle already warm.
The 1999 Softail series uses the same Twin-Cam 88 motor used in recent models, lubricated by three separate fluids for the engine, transmission, and primary. However, many riders are uncertain of how to to change the motorcycle’s engine oil, due mostly to the apparent absence of an oil drain plug.
What’s the best way to loosen an oil filter?
Twist the oil filter counter-clockwise with your hand until it comes off the threads on the engine block. If the filter is too tight to loosen by hand, use an oil filter wrench. A wrench that fits over the top of the oil filter is necessary, as there is very little space on the sides of the oil filter.
How often should you change the oil on a Harley Davidson?
Think about it. Sure, once all is broken in, you can then do it at 3000 intervals. I even went the extra step of opening the factory oil filter after the first 1K service just to see if all was well inside. If something is wrong inside your engine, that’s where you will see it and you may head off a serious problem. But like I said.
How do you change the oil in a Toyota Corolla?
For most Toyotas, you can wrap an old belt around the oil filter and unscrew it by hand. If you can’t do this, see our parts page to find a Toyota Corolla oil filter wrench. If your Corolla is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your Corolla.
How often should you change your oil filter?
Experts concur, many stating that the oil change interval can be longer primarily when using synthetic oil, which only requires you to replace it once every 5,000-10,000 miles. Regardless of whether you use synthetic, synthetic blend or conventional oil, don’t skimp when it’s time for an oil change.
What happens when you don’t change the oil filter?
So when it’s time to change the oil, the filter will set you back a few extra dollars – but not changing it is just false economy. If you leave that old filter on, as soon as you start the engine and get it to operating temperature, that nice clean motor oil is soon going to be just as dirty as the oil you just drained out.
What kind of oil should I use for my oil filter?
An important tip when it comes to keeping your oil filter working longer is to use high end synthetic oil. Synthetic motor oil is much more refined and distilled than regular oil, which means it will last longer and it’s also far less likely to clog your filter too early.