Can you start a Harley Davidson HD without a fob?
Starting your HD without a Fob! Your HD has the ability to be started without a Fob present jus in case the Fob is lost or the battery goes dead! Your Pin# to over-ride the security system is usually loaded up with the last 5 numbers of your Harley’s serial # backwards! (EX: serial # last 5 is 1 2 3 4 5……….it was entered as 5 4 3 2 1).
Why does my relay click but won’t start?
The battery is only a few months old but it drops to 10.6 when the starter is engaged. I will double check all the connections one more time. The battery is only a few months old but it drops to 10.6 when the starter is engaged. Click to expand… That’s not enough voltage. That’s not enough voltage. Click to expand…
What causes a Harley Davidson battery to go bad?
The most common cause of electrical problems on a Harley Davidson is the battery or the voltage regulator. Troubleshooting can be performed in any garage, and it saves on expensive service bills.
Why does my Harley Davidson not have power?
I checked the wire to the solenoid and it had power. Almost certainly it’s a battery problem, either low charge or bad cable connection. Charge the battery on a good bench charger, not a Tender, but a real charger. Remove and reconnect both battery cables making sure they are tight and connections are clean.
Why is the start button not working on my Harley Davidson?
If you did NOT read 12 volts, you would have to go back to the TSSM and hot wire (bypass it) in order to determine where the problem was. Also testing the start button would be something to check also. The key point to remember is that the “Start Relay Control” comes from the TSSM.
Why is my Harley Davidson Ultra Classic not starting?
I have a 2010 ultra classic with ABS. It is not starting. The battery voltage is 12.75 off the battery. When I turn the main switch on, I get a drop to 12.5, and when the kill switch is turned on, I get a drop to 12.38. The self test goes out and hit the start switch with nothing – no volt drop, no starter engage, no nothing. DEAD.
The battery is only a few months old but it drops to 10.6 when the starter is engaged. I will double check all the connections one more time. The battery is only a few months old but it drops to 10.6 when the starter is engaged. Click to expand… That’s not enough voltage. That’s not enough voltage. Click to expand…
What happens when you disconnect the battery on a Harley?
Since disconnecting the battery on my harley it wont start. Bike still has power all lights etc since disconnecting the battery on my harley it wont start. Hey there!