What happens if you overfill Harley transmission?
The main thing that will happen if you slightly overfill the trans is that some fluid could be blown out the vent tube when hot.
Can a Harley Davidson brake fluid catch on fire?
Harley’s may have seals that can tolerate both type of fluids, but I doubt it. If the brake locked and caught on fire, they were so hot the seals wouldn’t have survived anyways. So, for the dealer to say the brake fluid wasn’t the cause is pretty far-fetched.
What kind of fluid does a Harley Davidson use?
As the owner of a Twin Cam 88-powered Harley-Davidson motorcycle, it is your job to ensure that the engine, primary clutch system and transmission receives regular fluid changes.
What happens when you put fork oil on a Harley?
By adding the spacers in the fork tubes, you increased preload, causing less dive. Adding thicker oil slows compression damping, however, if it gets cold in your area, 20wt can be a little too heavy and start making a “knocking” noise in the front, on fast movement, or while going over bumps.
How to change the three oil compartments on the Harley?
How to Change the Three Oil Compartments on the Harley Davidson Twin Cam Motorcycle. 1 Step 1. Warm up your Harley-Davidson motorcycle to bring its fluids to operating temperature. Start the motor and let it idle for at least 3 minutes, 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5. More items
How much fluid does a Harley transmission hold?
The transmission fluid capacity is approximately 24 ounces (0.71 liters). Inspect o-ring for tears or damage. Replace if required. Wipe any foreign material from plug.
How many quarts does a Harley Davidson take?
The Softail calls for three quarts of oil. Start with 2 1/2 quarts. It’s very important not to overfill the reservoir. Next, take the bike for a short ride to bring the engine to operating temperature.
What is the best transmission oil for Harley Davidson?
AMSOIL Offers Superior Protection And Performance
| AMSOIL Recommendations for Harley-Davidson Motorcycles | ||
|---|---|---|
| Flathead | Best | Secondary |
| Transmission | 20W-50 | MVT Synthetic V-Twin Transmission Fluid |
| Primary Chain Case | 20W-50 | MVP Synthetic V-Twin Primary Fluid |
| Ironhead – Evolution Sportsters / V-Rods | Best | Secondary |
How much oil goes in a Harley Davidson primary?
Fill the primary with oil Harley Davidson Softails require one quart of primary fluid.
What is the transmission fluid capacity on a Harley Davidson?
According to the service manual for my former bike (’09 Electra Glide Classic) the Transmission Fluid capacity was 32 oz. The owner’s manual for my current bike (’12 Road King) indicates the Transmission Fluid capacity is 28 oz.
How much fluid do you put in a transmission?
Place a funnel into the fill plug hole and pour 22 oz. (650 milliliters) or 32 oz. (946 milliliters) of fluid into the transmission (differs by year). Different year models use different methods to check the fluid level. Some years need to be checked with the bike level while others need to be checked on the kickstand.
What kind of oil do you use for transmission on a Harley Davidson?
So those opting for a gear lube thinking that they are using thicker oil, really are not. Those using an 80W or 75W-90 in their transmissions are actually using a much thinner oil. The 20W-50 motorcycle oil’s viscosity is right in the “sweet spot” for optimum operation in all three holes and the volumes of positive reviews we receive back this up.
Where to drain transmission fluid on a Harley Davidson?
Locate the drain plug between the shocks on the bottom side of the transmission. It’s difficult to see and access, but with a 3/8″ ratchet, 6″-8″ extension, universal joint, and a 5/8″ socket, it can be removed. Place your drain pan underneath the bolt. Once the fluid is almost completely drained, level out the bike to remove any remaining fluid.