How much horsepower does a twin cam 88 have?
The bore of this engine is 3.75 inches and the stroke is four inches. It pushes 80 horsepower at 5,200 rpm. The torque of this engine is 82 ft-lb at 3,500 rpm. The engine can have different bore and strokes as well as horsepower and torque ratings depending on what motorcycle it is in.
Can a 88 cu be rebuilt to 96?
The cylinders ARE the same as you have now in the 88 cu in,,, YES you could use them… The pistons are not the same as they are for the Stroker motor of the 07 and up 96″… I would Bore the cylinders you have Now and go to 95″ and do the head work and a mild cam to give you the best.
How big is a Harley Davidson 88 twin cam engine?
The total displacement of the 88 twin cam engine is 1450 cc, or 88
Can a 88 engine be converted to a 96?
They increased the stroke to 4 3/8 ” with same bore as 88 to get the 96″ You also need stroker pistons so they don’t slam into the heads due to the increased stroke. For 88″ engines that don’t want to change crank out you can bore stock 88 cylinders out and convert to a 95 with new pistons (non stroker).
What is the displacement of a Harley Davidson 88B engine?
Although they’ve subsequently been 88B models. Read on for a brief overview of the specs of these engines. cubic inches. The 88B is 96 cubic inches, for a total of 1584 cc displacement. This is a marked improvement over the previous engine models, allowing for greater horsepower for the motorcycles. 88B twin cam engines is the dual coil system.
What is the torque on a TC 88?
Huh, my Stage II kit with 203 cams and PCIII got me only 75 hp. Torque was at 91. Thought Id get more hp. Only got 1200 miles on it. Think Ill run it a while and see what happens. Huh, my Stage II kit with 203 cams got me only 75 hp. Torque was at 91.
The total displacement of the 88 twin cam engine is 1450 cc, or 88
Is the Honda TC88 still on the road?
My TC88 will most likely still be on the road somewhere,when nobody will even remember Honda building motorcycles in 06.:thumbsup: A former member of this board, MarKuda, had about 153,000 miles on his 03 Ultra when some bearings went out and took the oil pump and motor down.
Which is better a Twin Cam 88A or 88B?
Twin Cam 88A’s found on Touring and Dyna lines will make more horsepower than 88B’s due to the counter balancers found on the 88B’s rob a little bit of its horsepower. Those numbers look about right to me. That sounds about right for a stock 88″ at the rear tire. Beyond that the skies the limit. Click to expand…