How to install a H-D Twin Cam camshaft?
Align timing marks and torque retaining bolts in the correct sequence as listed in manual. Install push rods adjust to the shortest length rocker arm end first. Rotate motor so pushrod is on the base circle and adjust pushrod to zero lash. Adjust pushrod per manufacturer’s specs and tighten jam nut (generally 2.5-4 turns depending on thread pitch).
How to install a camshaft on a fuel Moto engine?
Make sure to align the timing marks on the cams Replace inner cam bearings and install the cam plate into the engine. Note: if you have not removed or serviced the oil pump from the cam plate you can simply re-install the camplate, however if you have removed or replaced the oil pump it will need to be aligned.
Can a cam swap be performed on a 2007 Harley Davidson?
Performing a cam swap on a 2007-later Twin Cam motor is very straight forward. Here is some basic information and pictures from a cam swap on a 2010 Harley Davidson Ultra Limited. Please refer to your service manual for specific instructions for each model
Align timing marks and torque retaining bolts in the correct sequence as listed in manual. Install push rods adjust to the shortest length rocker arm end first. Rotate motor so pushrod is on the base circle and adjust pushrod to zero lash. Adjust pushrod per manufacturer’s specs and tighten jam nut (generally 2.5-4 turns depending on thread pitch).
Make sure to align the timing marks on the cams Replace inner cam bearings and install the cam plate into the engine. Note: if you have not removed or serviced the oil pump from the cam plate you can simply re-install the camplate, however if you have removed or replaced the oil pump it will need to be aligned.
Performing a cam swap on a 2007-later Twin Cam motor is very straight forward. Here is some basic information and pictures from a cam swap on a 2010 Harley Davidson Ultra Limited. Please refer to your service manual for specific instructions for each model