Can you drill a drain hole in a dirt bike?
First it’s going to be necessary to drill into the oil drain hole but when drilling the hole, make absolutely certain that you take your time and keep the drill bit straight with the hole, otherwise you’ll likely end up with problems you would have never wished were possible.
How to clean brake threads on dirt bike?
Once the hole is drilled and tapped to prepare for an insert, be sure that the hole is now clean of any cuttings by using a rag twisted into a Q-Tip shape and then getting a rinse with brake clean followed by gentle use of some compressed air.
What to do if the threads on your bike are too far gone?
First lets ensure you know that if the threads are too far gone, it’s likely going to require a Heli-Coil for threads that are internal such as the oil check bolt that won’t tighten, and if this problem resides on a shaft or bolt it may require replacement.
Where can I buy a stripped oil drain plug thread?
Here’s a cheap and easy fix for a stripped oil drain plug thread problem. It will work on a car or motorcycle, and you can buy it for around $5 at an auto parts store.
Can a stripped drain plug be repaired on a Harley Davidson?
DenLorsTools.com Summary: There are several options for repairing stripped holes for oil and transmission drain plugs on motorcycles – only one is the best fix. Regardless of whether it’s a Harley or any other type of motorcycle, these repair tips will help.
Which is the best drain plug hole repair?
The drain plug hole thread repair which takes the guess work out and does not rely on luck. The Time-Sert FIX. It’s easy and best above all it’s permanent. We all know that steel is stronger than aluminum. It’s ten times stronger. Time-Sert uses carbon steel. It’s also a solid threaded bushing which is not going to allow leaks between the threads.
Can a TIME SERT drain plug be removed?
Time-Sert uses carbon steel. It’s also a solid threaded bushing which is not going to allow leaks between the threads. As long as there’s room in the area in front of the drain hole to use the tooling, the pan or housing does NOT need to be removed.