How do you change a drive belt on a Harley-Davidson?

How to Change the Drive Belt on a Harley-Davidson

Place the Harley onto a motorcycle stand to get the rear wheel off the ground. Use a wrench to remove the rear wheel axle.
Remove the belt guards with the ratchet set.
Place the new drive belt on the transmission and rear wheel sprocket.

How often should a Harley drive belt be changed?

every 5,000 miles
The maintenance schedule for all Harley motorcycle models calls for a drive belt inspection and tension check after the first 1,000 miles and every 5,000 miles thereafter, the same interval as an oil-and-filter change.

How to install drive belt on Harley Davidson?

Harley Davidson Ultra Classic Drive Belt Installation – YouTube An over view of the installation of the drive belt on an Ultra Classic Harley Davidson.On this channel I post content about motorcycles, Please subscribe! a…

When to make a rear belt drive adjustment?

The adjustments should be done when the bike is cold. The adjustments should be made with the weight of a rider on the bike. 1. At the lower strand, position “A”, mid-way between transmission sprocket and rear wheel sprocket, apply 10 Ibs. of upward force on lower span of rear belt.

What kind of belt drive does a Dyna have?

We had a Dyna, Touring and Softail on hand to show you the slight differences. It doesn’t really matter the year and make of your Harley as this process is pretty standard. We can say that this video covers 2000 and newer Harley’s and likely earlier models.

What should the belt tension be on a Harley Davidson?

Harley-Davidson has a BELT TENSION GAUGE (Part No. HD-35381) to help. 2. Measure belt deflection “B” several times, each time with belt moved (by rotating rear wheel) to a different position on sprockets. With sprockets rotated to tightest belt posi-tion, belt deflection “B” (measured at position “A”) should be 5/16-3/8 in. 1.

How long does a Harley Davidson drive belt last?

Compared to a contemporary drive chain, belts are much lighter weight, require no lubrication, resist stretching, and cannot rust or corrode. Harley drive belts are robust and have been known to last upwards of 100,000 miles before replacement becomes necessary.

How to replace the drive belt on a Dyna Glide?

Remove the drive belt off of the front and rear sprockets. Discard the belt. Position your new belt onto the front and rear sprockets before re-attaching the shock absorber to the swing arm. Apply Threadlocker (blue) to the lower shock mount bolt before torquing to 30 to 40 ft/lbs. Figure 14. Shock disconnected and swung upwards for belt access.

How do you check the belt tension on a Harley Davidson?

This modal can be closed by pressing the Escape key or activating the close button. When you remove the rear wheel, make sure you check the Harley-Davidson belt tension and belt alignment after you reinstall it. Bob and Mark walk us through a couple of these important steps.

Navigation