What kind of light does a bike blinker use?
The bike is a 690 enduro R 2015. Original turn signal bulb are 10w each, after replacing those incandescent bulb with led bulb (7.5W each) and a dedicated led relay, I notice a funny thing: When the bike is not moving, signal light don’t work, nothing.
Why are the lights on my blinker not blinking?
No No… the bulbs are not even blinking, both bulbs are out when I initiate the right blinker, when I cancel it, the both come back on. While the right blinker is on, the relay makes a fast clicking sound… I am at a loss…
Why does my bike turn signal not flash?
If the bike is not moving the right turn signal functions correctly. If bike is moving, if you press the right turn signal, it will light up, but not flash. Looked in the service manual and this problem is not listed for troubleshooting the turn signals. Any suggestions? Hi, Mike. Would try the signal function without the Badlands module.
Why does my bike light not come on?
My bike does the same thing. Its a 77 750 and when i hit the turn signals the lights illuminate as they should but there is no flashing. If power must go through the relay to turn the light on I think that the problem could be in the relay and the relay is stuck in a closed position.
The bike is a 690 enduro R 2015. Original turn signal bulb are 10w each, after replacing those incandescent bulb with led bulb (7.5W each) and a dedicated led relay, I notice a funny thing: When the bike is not moving, signal light don’t work, nothing.
Why are my motorcycle turn signals not blinking?
6 Reasons why your motorcycle LED turn signals aren’t blinking 1 Your new bulbs might not draw enough current. 2 One of your wires could be reversed or grounded. 3 Your flasher wire could be faulty or not connected at all. 4 You’ve blown a fuse. 5 Your relay connection is not functioning correctly. 6 One bulb of the bulbs has burnt out.
No No… the bulbs are not even blinking, both bulbs are out when I initiate the right blinker, when I cancel it, the both come back on. While the right blinker is on, the relay makes a fast clicking sound… I am at a loss…
Why does my bike Flasher not come on?
The proper bulbs come on when the switch is moved L or R, but they just don’t flash. The same thing happens when the flasher is completely removed from the bike. This means the bulbs are getting their current from somewhere other than the grey lead from the flasher.