What should battery voltage be on Harley Davidson Softail?
Attach the positive voltmeter lead to the positive battery post and the negative to the negative. The battery should read above 12.2 volts. If your Softail will start, keep the voltmeter connections in place and start the engine. The charging system should now be working and battery voltage should increase to above 14 volts.
What should my Electrical reading be on my Softail?
A normal reading is around 100 amps. If your reading is higher, you may have mechanical engine damage, a faulty starter, or high resistance in the wiring routed between your starter and battery. The wiring can be checked fairly quickly. Place your multimeter’s negative lead on the starter ground wire and the positive lead on battery negative.
How many CVO Softails did Harley Davidson make?
ThunderPress mentions that only 1500 of the CVO Softail were made for the model year, which we’re sure makes collectors happy. Other features that were considered unique that the Convertible was the only bike at the time of any Harley model to offer keyless ignition and lockable, soft-sided panniers.
How to test a Harley Davidson Softail stator?
To test the stator, you’ll need a volt meter set to AC volts. Disconnect the voltage regulator and read the voltage between all five wires connected to the voltage regulator. Raise the engine rpm’s to 2,000 and record the readings. All readings should be between 32 to 46 volts. If some of the connections are out of spec, you’ll need a new stator.
Attach the positive voltmeter lead to the positive battery post and the negative to the negative. The battery should read above 12.2 volts. If your Softail will start, keep the voltmeter connections in place and start the engine. The charging system should now be working and battery voltage should increase to above 14 volts.
A normal reading is around 100 amps. If your reading is higher, you may have mechanical engine damage, a faulty starter, or high resistance in the wiring routed between your starter and battery. The wiring can be checked fairly quickly. Place your multimeter’s negative lead on the starter ground wire and the positive lead on battery negative.
To test the stator, you’ll need a volt meter set to AC volts. Disconnect the voltage regulator and read the voltage between all five wires connected to the voltage regulator. Raise the engine rpm’s to 2,000 and record the readings. All readings should be between 32 to 46 volts. If some of the connections are out of spec, you’ll need a new stator.
What should the charging voltage be on a Harley stator?
You can use 13 as a good all around battery voltage. That is a good healthy battery staying charged just above 12 volts. Example only: Let’s say the stator is rated for 10 amps x 13-volt battery: 10 x 13=130 watt charging system. So you have a 130-watt charging system in this example.
What are the signs of a bad starter relay?
Broken or corroded wiring – Damaged or dirty wires to the battery or to the starter solenoid (or wires that are loose) can prevent sufficient power from reaching the starter. Alternator – The alternator is designed to power all of your car’s electrical systems when the vehicle is running. It also recharges the battery.
What causes no start on Harley Davidson Softail?
A parasitic draw occurs when one or more circuit remains powered after the ignition is turned off. A draw on the battery of more than 0.02 amps can deplete the battery overnight enough to create a no start problem. To test for a parasitic draw, place your multimeter to the amps setting in series with the battery.
What causes a negative battery terminal to melt?
Cable connections for battery terminals are relatively simple, but problems can occur that will cause electrical shorts to melt a negative terminal. Fortunately, the solutions are usually simple as well. Check all cables connected to both the positive and negative battery terminals.
What causes a battery to melt in the cradle?
This is especially true for after-market batteries that come with a plastic cradle. Connecting jumper cables to the wrong battery terminals will also result in a melted battery terminal. If the main power cable from the starter or the ground cable appear worn or frayed, replace them.
Why is my battery post melting on my lawn mower?
My old battery post melted, I bought a new one, I checked voltage that shows 12.07 on the new battery which the instructions said it should be.. battery post is very clean, no corrosion. The negative cable gets so hot it has started melting the cable into the battery. I took the cables loose before the post started melting.
Where does the negative battery go on a motorcycle?
The starter motor is large coil of wire, connected from its positive terminal to the engine case; the battery negative goes directly to the case, too. There were no blown fuses. I can’t seem to find a short although there was sparking when I connected the negative battery cable to the battery that seemed excessive.
What is the life expectancy of a Harley Davidson battery?
Do not mess around with weaker, or cheaper batteries. Especially for a newer Touring Harley. A weaker battery will shorten the life expectancy of your starter & starter ring gear.
When to change stator on Harley Davidson Softail?
If the readings are low or zero, switch your meter to reads ohms, shut off the engine, and read the resistance between all five wires. A proper reading is around 0.2 ohms. The reading infinite or “OL” on your meter indicates an open circuit. The stator must be replaced.
How does the battery work on a Harley Davidson?
This is a modal window. This modal can be closed by pressing the Escape key or activating the close button. Unless you have a kick-start, you’ll need a battery to get your Harley started and to keep it functional. With that can come some Harley Davidson charging problems.