What should I torque the front axle on a Harley Davidson?
Torque the axle nut to 60 to 65 foot-pounds, using a foot-pound torque wrench and socket. If you’re working on a Softail model, torque the slider cap nuts to 11 to 15 foot-pounds, and ensure that the gaps at the front and the rear of the sliders are equal.
When did the wheel bearings on a Harley Davidson come out?
This was a little more work, but with properly set wheel end play and with regular maintenance, this style wheel bearing could last indefinitely under normal riding conditions. Around 2000, Harley introduced the Twin Cam bikes with front and rear sealed Harley wheel bearings.
How do you tighten the front axle on a Harley Davidson?
Ensure that the fork slider cap bolts — or the axle pinch screw if you’re working on a Sportster — are loose enough to allow the axle to slide. Stick a screwdriver or steel rod through the hole in the right end of the axle to prevent the axle from turning. Torque the axle nut to 60 to 65 foot-pounds, using a foot-pound torque wrench and socket.
How do you seal wheel bearings on a Harley?
They were packed with grease and set against a bearing race with a wheel bearing seal on the outside end of the wheel hub to block out the elements and seal in grease. Typically, at a 10,000 mile service, or when replacing a tire, the Harley wheel bearings would be serviced.
Where can I buy a 2006 Harley Davidson?
2006 Harley-Davidson Ultra Classic, One owner with low, low miles! Has some nice extras like Python pipes, HOG tunes stereo upgrade, adjustable rider’… 2006 Harley-Davidson Ultra Classic Electra Glide, Used 2006 Harley-Davidson Ultra Classic Electra Glide MOTORCYCLE FOR SALE NEAR MILWAUKEE, WI This Us…
Where can I buy a 2006 Harley Davidson Electra Glide?
2006 Harley-Davidson Ultra Classic Electra Glide, Used 2006 Harley-Davidson Ultra Classic Electra Glide MOTORCYCLE FOR SALE NEAR MILWAUKEE, WI This Us… 2006 Harley-Davidson Electra Glide Ultra Classic FLHTCUI , , Tons of extra accessories make this one of a kind! Aquatic AV audio! Contact us today!…
Torque the axle nut to 60 to 65 foot-pounds, using a foot-pound torque wrench and socket. If you’re working on a Softail model, torque the slider cap nuts to 11 to 15 foot-pounds, and ensure that the gaps at the front and the rear of the sliders are equal.
Ensure that the fork slider cap bolts — or the axle pinch screw if you’re working on a Sportster — are loose enough to allow the axle to slide. Stick a screwdriver or steel rod through the hole in the right end of the axle to prevent the axle from turning. Torque the axle nut to 60 to 65 foot-pounds, using a foot-pound torque wrench and socket.
When did the torque specs come out for the Softail?
Discussion in ‘ Softail Models ‘ started by BOWHIKER, Mar 17, 2010 . I printed off the complete torque specs for the softail models .
What’s the torque on a front axle nut?
To torque, or check axle nut torque, use a 6mm allen to loosen the pinch bolt in the right side lower slider. Then, use the 19mm allen with your foot pounds torque wrench and tighten the axle 59 to 79 foot pounds. Mike recommends going right up to 79 foot pounds.
Discussion in ‘ Softail Models ‘ started by BOWHIKER, Mar 17, 2010 . I printed off the complete torque specs for the softail models .
To torque, or check axle nut torque, use a 6mm allen to loosen the pinch bolt in the right side lower slider. Then, use the 19mm allen with your foot pounds torque wrench and tighten the axle 59 to 79 foot pounds. Mike recommends going right up to 79 foot pounds.
How much torque does a front axle nut have?
The factory service manual lists the front axle torque spec as 70 to 75 foot pounds. We would always suggest reaching for the higher number on a larger fastener such as this. The front axle nut is metric. Use a twenty four millimeter socket with a reliable torque wrench.
What are the torque specifications for a Ford Super Duty?
Brakes, Rear, caliper pin bolts – F-250/F-350 with Ford and Dana axle 27 lb/ft, 36 Nm Brakes, Rear, disc brake adapter bolts – F-250/F-350 with Ford axle 150 lb/ft, 203 Nm Brakes, Rear, disc brake adapter bolts – F-350/F-450/F-550/Motorhome with Dana axle 100 lb/ft, 135 Nm Brakes, disc, front brake caliper pin bolts (2) 42 lb/ft, 56 Nm
How big is a Harley-Davidson FXD Super Glide?
General information Engine type: V2, four-stroke Torque: 106.0 Nm (10.8 kgf-m or 78.2 ft.lbs) @ 2 Compression: 8.8:1 Bore x stroke: 95.3 x 101.6 mm (3.8 x 4.0 inches)
Brakes, Rear, caliper pin bolts – F-250/F-350 with Ford and Dana axle 27 lb/ft, 36 Nm Brakes, Rear, disc brake adapter bolts – F-250/F-350 with Ford axle 150 lb/ft, 203 Nm Brakes, Rear, disc brake adapter bolts – F-350/F-450/F-550/Motorhome with Dana axle 100 lb/ft, 135 Nm Brakes, disc, front brake caliper pin bolts (2) 42 lb/ft, 56 Nm