What should you do when installing brake pads?
Taking a little extra care when you’re installing brake pads ensures you’ll get the maximum life out of them. One of the often overlooked items would be to either recondition or replace the hardware. This supports proper caliper movement and can also help prevent brake noise and uneven pad wear.
Do you have to replace rotors when replacing brake pads?
Rotors can usually only be resurfaced once, if at all, before they must be replaced. Ultimately, resurfacing rotors when you install new brake pads is a middle price point and a good compromise if you don’t want to spend more money on new rotors. 3. Brake Pad Replacement & Rotor Replacement
What happens when you put brake pads on a disc?
If the piston does go in crooked it could damage the seals or the cylinder walls of the caliper bore. And using excessive force can possibly damage the piston itself. After the pads are installed on a floating disc brake caliper type braking system, it’s time to remount the caliper to the steering knuckle.
How are brake pads secured to the caliper?
When installing brake pads on some vehicles the caliper retaining bolts will actually hold the pads in place. On these types of systems sometimes the factory will secure the caliper bolts with a thread locking compound to prevent them from backing out.
Do you need to break in New brake pads?
Having new brake pads and rotors installed happens on a regular basis. Once those brake pads and rotors are mounted, it is essential to properly break them in. Bedding in, commonly known as breaking in, new brake pads and rotors is necessary for new brakes to work properly.
How to change brake pads at Home Depot?
1 Apply brake grease to the metal plates on the backs of your new brake pads. A dime-sized amount is enough. 2 Install the new brake pads. 3 As previously mentioned, make sure to double-check the orientation before brake pad installation and consult your owner’s manual if you need more specific guidance.
How are brake pads installed on a disc brake system?
After the pads are installed on a floating disc brake caliper type braking system, it’s time to remount the caliper to the steering knuckle. Pictured to the right are replacement General Motors caliper slides and bolts.
How do you remove rotors from brake pads?
Once the pads are off, remove the rotor. On many vehicles, you’ll need to remove the caliper mounting bracket in order to remove the rotor. The brake caliper bolts to the brake caliper mounting bracket which bolts to the spindle assembly. To remove the brake rotor, first remove the brake caliper and then remove the brake caliper bracket.