What kind of oil does a Harley Davidson use?

Although Harley Davidson suggests using genuine Harley Davidson Formula+ Transmission and Primary Chaincase Lubricant (part number 99851-05), many owners use gear oil such as 75w-90 with success. Some even use automatic transmission fluid.

How to change transmission fluid in a Harley Davidson Softail?

Use a 7/32″ Allen key or socket to start threading the plug, then switch to the 5/8″ socket. Final torque is 20 ft.-lbs. Figure 6. A small amount of metal shavings on the drain plug magnet is normal. Inspect the fill plug o-ring for damage and replace if necessary.

How do you do an oil change on a Harley Davidson?

You may want to use a torque wrench to tighten the plugs 14 to 21 feet (4.3 to 6.4 m)-lb; otherwise, tighten until the plugs are fully seated and not stripped. Remove the oil filter. Place your drain pan under the front end of the engine.

Where to drain oil on a Harley Davidson Twin Cam?

Drain the transmission oil. The transmission drain plug it centered directly above the shock absorbers. Because both the engine and transmission drain plugs are so close to each other, they can easily be drained simultaneously into the same drain pan.

Fully Synthetic. This is the best quality oil Harley engine oil. 100% synthetic 4-Stroke lubricant with Ester technology. Engineered for 2 cylinder engines and meets Harley Davidson spec. Meets JASO MA2 specifications for optimal wet clutch performance and suitable for catalytic converters.

When to do an oil change on a Harley Davidson?

Discussion in ‘ Sportster Models ‘ started by Nikko684, Apr 23, 2014 . Firstly, I want to say hi guys. Been gone for a bit. super busy with work lately. I do check in from time to time though but hey, so I have a 2006 (Carbuerated) XL1200C. Now its time for an oil change, which I plan to do myself naturally.

What makes a full synthetic oil so good?

Full-synthetics are man-made oils that have been tailored to give them certain advantages like the fact that they perform better in extreme temperatures, are less likely to evaporate or thin excessively in heat, etc. Full-synthetics contain poly-alpha-olefins (PAO) and esters.

What should the oil temp be on a Harley Davidson?

This test using the Amsoil three-fluid system showed an average temperature reduction of 12 degrees from stock and 9 degrees less than Harley-Davidson’s Syn3. Temperature fluctuation seems to have flattened out as well with the oil temp staying between 225 and 230.

What do I need to change oil on a Harley Davidson Softail?

Materials Needed Replacement oil (either Dino or synthetic will do) Catch pan Replacement oil filter Shop rags Oil filter wrench (optional) Torque wrench Motorcycle lift or 2×4 block of wood (optional)

Which is the best synthetic oil for a Harley?

To read about wear test comparisons performed between Screamin’ Eagle® Synthetic (SYN3) and AMSOIL Synthetic Oil check out Amsoil vs. Harley SYN3. Also worth reading is the Great Oil Debate article written for American Iron magazine regarding synthetic oils.

What kind of lube do you use on a Harley?

Some use gear lube in the transmission and chaincase. Some even use ATF in chaincase and claim they have great results. Answer: For any Harley Twin-Cam engine, we highly recommend using AMSOIL Synthetic 20W-50 in “all three holes” (as they put it) for two essential reasons.

When was the last oil recommendation for a Harley Davidson?

Oil Recommendations? Discussion in ‘ Sportster Models ‘ started by Nikko684, Apr 23, 2014 . Firstly, I want to say hi guys. Been gone for a bit. super busy with work lately.

Update: AMSOIL now offers dedicated fluid for Harley Davidson primary chain-cases and transmissions. These are called AMSOIL V-Twin Primary Oil and AMSOIL V-Twin Transmission Oil.

Do you need primary oil change on Softail Harley?

Bob walks us through Harley primary oil change on Dyna and Softail models noting Primary Chain Adjustment is not longer need on TC 96, 103 and 110. Remove the drain plug, derby cover and let drain.

When did Harley Davidson change the oil line?

From 1963-65 the oil feed lines to the cylinder heads were relocated using a external line from the engine case to the cylinder heads to deliver cooler oil to the cylinder head by passing it through an outside oil line. Though this engine design remained basically the same for 17 model years, there were many changes.

How to eliminate primary chain oiler in V-twin?

So here’s the plan. Plug the return and vent holes in the primary cover, use the oil feed fitting on the primary as a vent. Block off the oil feed line on the pump. Run a straight hose from pump to oil tank vent to eliminate the Tee that is currently in place and do something with the oil return fitting at the case.

Why did the chain oilers go out on a Harley Davidson?

The chain oilers disappeared in the the Evolution era. The primary chain cases were sealed, eliminating the source of another oil leak. Rather than drip oil, the clutches were changed to a wet design to help to cool the stator, which had been relocated to the primary.

How does a primary oil leak work on a Harley Davidson?

How to Fix a Primary Oil Leak on a Harley. Harley-Davidson motorcycles use a chain-driven primary system to transmit power from the engine sprocket to the clutch housing. Drive plates in the clutch pack engage the plates in the clutch pack to drive the primary shaft in the transmission.

Where does the oil go in a Harley Davidson?

Harleys are dry-sump bikes, meaning the oil is stored remotely and pumped in. All older Harleys and some new ones locate the oil in a tank that is higher than the bottom of the engine cases. Liquid oil seeks to fall, and the only thing holding it in the oil tank is a small check ball.

How much lubricant to put in a primary chain case on a Harley?

Install the jiffy stand and jiffy stand mounting bolts. Torque the bolts to 15 to 20 foot-pounds with a 3/8-inch torque wrench and Allen driver. Add 38 fluid ounces of Harley primary chain case lubricant to the primary through the clutch inspection hole.

Discussion in ‘ Oil ‘ started by Billbo, Nov 16, 2009 . ALL, I just bought my 2001 Heritage – the dealer changed out all the fluids and used reg HD oils. I have no idea of any mods that may have been done. I believe its pretty much just pure stock.

I have one of those neat little oil temp gauge dipsticks – HOT engine only shows about 180-200 degrees on that temp gage – after riding for about 40 miles or so. Your oil should be hotter than that unless the outside air temps are frigid.

What happens to the oil in an Ironhead bike?

When you crank or start the engine oil is then forced out the breather. As long as it stops after a minute or two you are probably OK. The longer the bike sits between starts the more oil there will be.

Where can I sell a 2003 Harley Davidson?

Ads are free. Click here to sell a used 2003 Harley-Davidson FXDL Dyna Low Rider or advertise any other MC for sale . You can list all 2003 Harley-Davidson FXDL Dyna Low Rider available and also sign up for e-mail notification when such bikes are advertised in the future. Bikez has a high number of users looking for used bikes.

Where can I find a 2003 Harley Davidson Dyna Low Rider?

You can list all 2003 Harley-Davidson FXDL Dyna Low Rider available and also sign up for e-mail notification when such bikes are advertised in the future. Bikez has a high number of users looking for used bikes. Before you buy this bike, you should view the list of related motorbikes Compare technical specs. Look at photos.

What are the specs of a Harley Davidson Low Rider?

Harley-Davidson FXDL Dyna Low Rider Specs. The Harley-Davidson FXDL Dyna Low Rider model is a Custom / cruiser bike manufactured by Harley-Davidson . In this version sold from year 2003 , the dry weight is 300.0 kg (661.4 pounds) and it is equiped with a V2, four-stroke motor.

Harley Recommended Oil Weights 1 All Temperatures. Harley-Davidson recommends SAE 20W50 viscosity grade oil for “all temperature conditions,” according to the Harley-Davidson website. 2 Low Temperatures. Low temperatures, those of 40 degrees Fahrenheit or less, call for Harley-Davidson SAE 10W40 H-D Motorcycle Oil. 3 High Temperatures.

What kind of oil does a 03 FXDL use?

Personally, my 03 FXDL runs a lot smoother with real gear oil in the tranny. I use Belray synthetic and no more missed neutrals. Good luck What ever fluids float your boat..but the quantities are listed above.

Why do you need an oil filter on a Harley Davidson?

An oil filter removes tiny particles from the oil, helping to keep the oil fresher and work to its best ability for longer. A new filter costs a few quid and it only takes a couple of minutes to change. We’ve put together this Harley-Davidson oil filter chart to help you pick the best oil filter for your motorcycle.

How do you change transmission fluid on a Harley Davidson?

They remove the dipsticks and drain plugs to let the fluids flow into a clean drain pan. Bob preps the drain plugs for reinstall with Loctite threadsealant and reinstall. After those are torqued to spec, Bob fills the transmission fluid and then to the oil filter before he fills up the oil pan.

What’s the part number for a Harley Davidson Trans Oil?

The Harley part number for the stock trans oil is (99892-84 quart or 99891-84 gallon). I want to switch to Mobil 1 syn. Still running the OEM 5 speed trans. The average temp here in Hawaii is around 90 degrees. 75W-140 or 75/90. My ridding style vary from cruzzin to ridding like I stole it. Re: ??Trans oil help??

How many quarts does a Harley Davidson transmission take?

How many quarts does the transmission of a Harley Davidson take? The amount of fluid depends on the fluid you select. Some fluids can be used in the engine, chaincase, and the tranny. As such, a quart of fluid should be enough for the Harley.

How do you change transmission oil on a Harley Davidson?

Here is how to change the transmission oil on a Harley Davidson Evolution Big Twin motorcycle engine. With the motorcycle engine warmed up, remove the drain plug from the bottom of the Harley-Davidson Big Twin engine. Inspect the magnet on the plug to see if there are any large metal chunks.

Update: AMSOIL now offers dedicated fluid for Harley Davidson primary chain-cases and transmissions. These are called AMSOIL V-Twin Primary Oil and AMSOIL V-Twin Transmission Oil.

What kind of oil to use in motorcycle transmission?

Many automotive oils are not, so we recommend purchasing an oil that specifically states it’s formulated for use in motorcycle transmissions. 75w90 gear oil is often substituted for 20w50 motor oil in this application. No parts specified.

Is it OK to use automatic transmission fluid in a Harley?

As for the use of automatic transmission fluid (ATF) in Harley primary chaincases, we have heard that some riders do this, but we do not recommend this option. Again, let’s look at actual viscosity numbers to back this up. The viscosity of a typical ATF at 100°C is 7.5 centistokes.

What does the oil light mean on a Harley Davidson?

Cut the trip short and returned home to check the oil and it being hot checked the manual where it should read on the stick and sure enough just a bit under the full mark for hot conditions. I would guess it was some 3/16ths below the full mark. Added just enough to bring it up to the hot full mark and the red light did not show anymore.

Is there oil in the tank of my Harley Davidson 20w50?

Harley Davidson 20W50 I have not ridden the bike in about 1 1/2 yrs as I have been deployed. So it did not happen while I was riding it. It has been moved from its storage location, but was not ridden. Wanted to change the oil before riding…you know the rest. Yes, there is oil in the tank.

How many miles between oil changes on a Harley?

Running syn oil you can run more miles between changes. You’ll get lots of opinons from others on the forum and that does not make them wrong, just thier opinon. So having said that I run about 5,000 miles between changes. I just went from a lifetime of 3,000 mile changes, to my service manual interval of 5,000 miles (Mobil1 V-twin20/50).

What kind of oil do you use on a Harley Davidson?

So long as you are staying away from automobile-specific oils, you’ll find that there are plenty of fantastic oils to buy. For example, one of the best oils on the market for your Harley is the Mobil 1 Racing 4T Engine Oil. This motorcycle oil is recommended for tons of 4-stroke engines, and is used for both street and motocross motorcycles.

When to change the oil on a Harley Davidson?

As you can see, there are plenty of options to choose from when it comes to selecting an alternative oil for your Harley Davidson motorcycle. When it comes to changing your oil, if you are looking to do it on your own, make sure that you turn on your motorcycle engine and let it run for at least 10 minutes before draining it.

What kind of oil light does a Dyna Glide have?

My ’05 Dyna Glide while on short trip uptown started showing the red oil light when at idle. A bit of throttle and it went away. First time this ever occured.

How do you change the oil in a Harley Davidson?

Drain the engine oil into an oil pan. Replace the drain plug’s O-ring, then screw it into place after the oil has drained. Tighten the drain plug to 18 foot-pounds with a torque wrench. Unscrew the oil filter from the front of the engine, using an oil filter wrench. Drain any oil trapped within the filter housing into your oil pan.

What are the specs of a 2003 Harley Davidson?

Join the 03 Harley-Davidson FXD Dyna Super Glide discussion group or the general Harley-Davidson discussion group. List related bikes for comparison of specs. Sell or buy used bikes?

Dan s motorcycle specifications fork oil maintenance harley performance unled instructions flhr c s road king front end lowering kit 1warning j03242 rev general removal left and right forks number i am replacing my front fork springs with progressive on 2000 vulcan 1500v clic the owners manual does

Join the 03 Harley-Davidson FXD Dyna Super Glide discussion group or the general Harley-Davidson discussion group. List related bikes for comparison of specs. Sell or buy used bikes?

How much does a 2004 FXD Harley Davidson cost?

The 2004 FXD** are $60 the cost of which you will recoup the first time you use it. HD web site has them here if you do not have a dealer near by. Thanks for publishing that detailed photo of the diaphragm spring! I was never sure of exactly what part of the spring would be considered the bottom. Haven’t had any problems, but still nice to know.

Navigation