How does a Softail work on a Harley Davidson?
Late model Softails use a complex network of computers to monitor the engine, transmission, and braking system. These systems must stay properly powered by the battery. The wiring connecting the systems together must remain intact. These problems occur and, although difficult to find at times, a series of test will help you narrow down the cause.
How to check DTC’s on a Harley Davidson Softail?
Press and hold the mute/power button, and then turn the ignition switch to accessories. Keep the mute button held as the system starts up and for three seconds after the warning screen appears. Press the accept option on the touchscreen, then select “DTC’s.” Any active codes will be displayed at this time.
Do you need a multimeter to start a Softail?
To start your Softail’s engine and keep it running, there must be a constant supply of electricity going into and out of the battery. This electricity must be regulated; otherwise, heat will build and components will be quickly damaged. A multimeter is an invaluable tool when diagnosing electrical problems.
How to test for parasitic draw on Harley Davidson Softail?
To test for a parasitic draw, place your multimeter to the amps setting in series with the battery. Do not turn your ignition on during this test. Remove the positive battery cable and attach one multimeter lead to the cable. Attach the other lead to the positive battery terminal. Read the current moving through the meter.
Late model Softails use a complex network of computers to monitor the engine, transmission, and braking system. These systems must stay properly powered by the battery. The wiring connecting the systems together must remain intact. These problems occur and, although difficult to find at times, a series of test will help you narrow down the cause.
Do you lose ride height on Harley Davidson Softail?
You do lose ride height and lean angle is reduced, but touching the ground at stops can be more important; just be careful until you learn the bike’s new lower cornering limits. Skill Level – This can be the easiest mods to the most difficult.
Where are the black wires on a Harley Davidson Softail?
The black wire connects to the main wiring harness ground near the battery. The other three black wires go to the stator. Make sure these wires are all clean and tight. Spray some electric terminal contact cleaner on the connections to promote conductivity. To test the stator, you’ll need a volt meter set to AC volts.
To test for a parasitic draw, place your multimeter to the amps setting in series with the battery. Do not turn your ignition on during this test. Remove the positive battery cable and attach one multimeter lead to the cable. Attach the other lead to the positive battery terminal. Read the current moving through the meter.
What kind of Night Train does a 2005 Harley Davidson have?
Join the 05 Harley-Davidson FXSTBI Softail Night Train discussion group or the general Harley-Davidson discussion group. List related bikes for comparison of specs. Bikez has discussion forums for every bike. View comments, questions and answers at the 2005 Harley-Davidson FXSTBI Softail Night Train discussion group.
The black wire connects to the main wiring harness ground near the battery. The other three black wires go to the stator. Make sure these wires are all clean and tight. Spray some electric terminal contact cleaner on the connections to promote conductivity. To test the stator, you’ll need a volt meter set to AC volts.
Press and hold the mute/power button, and then turn the ignition switch to accessories. Keep the mute button held as the system starts up and for three seconds after the warning screen appears. Press the accept option on the touchscreen, then select “DTC’s.” Any active codes will be displayed at this time.
Are there rear running lights on a Harley?
You don’t say anything about year but unless something has changed, rear turn signals on Harley’s have never been running lights unless you add the kit to make them so. Can’t figure it out. Brake light works, rear turns work, but no rear running lights.
What causes no start on Harley Davidson Softail?
A parasitic draw occurs when one or more circuit remains powered after the ignition is turned off. A draw on the battery of more than 0.02 amps can deplete the battery overnight enough to create a no start problem. To test for a parasitic draw, place your multimeter to the amps setting in series with the battery.