What to do if your Harley Road King starter fails?
If your Harley-Davidson Road King starter is problematic and has failed to pass the starter draw test, you must remove it, inspect it for faults, clean it and then reassemble it. Check the Harley owner’s manual for inspection instructions and to find out whether you can repair the starter or need to buy a new one.
What kind of idle problem does a road King have?
Rough idle, Carbon fouling the plugs, backfiring, and it sounds like the fuel pump is dumping way too much fuel. It is an 01 Road King with PCM3-USB, Arlen Ness Big Sucker Intake and Wild Pig Slip On’s. Please help!
Why does the Harley Davidson Road King have cruise control?
30 or 40 years ago, people probably would never have dreamed that a motorcycle would come with cruise control but the Road King does. This is a great feature if you’re riding on long distances and you want to be able to move around a little bit more freely on the bike without constantly having that movement affect your speed.
Why does the Harley Davidson Road King have electronic fuel injection?
One of the pieces of technology that Harley-Davidson employed for the Road King is electronic fuel injection. This accomplishes several different things. First and foremost, it provides an avenue for the motorcycle to have more power than it would otherwise. It also allows it to operate more smoothly.
Rough idle, Carbon fouling the plugs, backfiring, and it sounds like the fuel pump is dumping way too much fuel. It is an 01 Road King with PCM3-USB, Arlen Ness Big Sucker Intake and Wild Pig Slip On’s. Please help!
30 or 40 years ago, people probably would never have dreamed that a motorcycle would come with cruise control but the Road King does. This is a great feature if you’re riding on long distances and you want to be able to move around a little bit more freely on the bike without constantly having that movement affect your speed.
How old is the Harley Davidson Road King?
It’s part of a dynasty that’s been going strong since 1903 Remember, Harley-Davidson has been producing motorcycles for more than 100 years. Therefore, it only stands to reason that the Road King would turn out to be something special.
One of the pieces of technology that Harley-Davidson employed for the Road King is electronic fuel injection. This accomplishes several different things. First and foremost, it provides an avenue for the motorcycle to have more power than it would otherwise. It also allows it to operate more smoothly.
How does a starter solenoid work on a Harley Davidson?
Connect one end of both wires to a fully-charged 12-volt battery’s negative terminal. Connect one of the free clips to the starter solenoid’s field coil terminal, located on the right side of the terminal. Connect the remaining clip to the starter solenoid housing to serve as a ground connection.
What should the voltage be on a starter solenoid?
Place the meter’s black probe on the battery’s negative terminal (the terminal with the minus sign) and the red probe on the positive terminal (the terminal marked by a plus sign). The voltmeter’s display should indicate a minimum voltage reading of 12.3 volts DC.
What should I do if my starter solenoid does not retract?
The solenoid pinion gear, exposed at the inner face of the solenoid, should click and retract into the starter housing. The starter solenoid is defective if the pinion gear does not retract. Disconnect the field coil terminal clip from the battery’s negative terminal. Move the clip to the battery’s positive terminal.
How to diagnose a car starter motor problem?
When Diagnosing starter motor problems; always start with the battery. For the starter motor to work; make sure that your car battery is in excellent working condition and fully charged. Starter motors are used to rotate an engine to begin the starting process.
What’s the best way to test the starter?
Checking the Pinion Turn on the headlights and try to start the car. A couple of things might happen when you do this. Turn the pinion stub with an adjustable wrench (spanner). The starter is a large electrical motor in a cylindrical housing, and it’s usually bolted to one side of the engine block.
What are the problems with a Harley Davidson starter?
Harley Davidson Common Starter Problems Summary and Fixes – YouTube There are a few very common HD Starter problems. It starts with pushing the start button on only hearing a There are a few very common HD Starter problems. It starts with pushing the start button on only hearing a Skip navigation Sign in Search Loading…
If your Harley-Davidson Road King starter is problematic and has failed to pass the starter draw test, you must remove it, inspect it for faults, clean it and then reassemble it. Check the Harley owner’s manual for inspection instructions and to find out whether you can repair the starter or need to buy a new one.
How do you test a starter solenoid on a Harley Davidson?
Connect one clip to the battery’s positive terminal. Connect the free clip to the starter relay terminal on the left side of the starter solenoid. The solenoid pinion gear, exposed at the inner face of the solenoid, should click and retract into the starter housing. The starter solenoid is defective if the pinion gear does not retract.
Harley Davidson Common Starter Problems Summary and Fixes – YouTube There are a few very common HD Starter problems. It starts with pushing the start button on only hearing a There are a few very common HD Starter problems. It starts with pushing the start button on only hearing a Skip navigation Sign in Search Loading…
What to do if your motorcycle rotor fails a resistance test?
If the AC Output test fails and Resistance Check and Stator IB Test pass, then the rotor is at fault (Pull primary covers and inspect rotor for damage). Unplug the regulator plug from the stator. Start motorcycle and change Voltmeter to AC volts. Probe both stator wires with your meter leads.