What year did Harley come out with the breakout?

What year did Harley come out with the breakout?

The Harley-Davidson Softail Breakout was a v2, four-stroke Road motorcycle produced by Harley-Davidson between 2013 and 2019.

How do you reset the pin on a 2009 Harley Davidson?

1. Turn the IGN key to IGNITION and immediately hold both turn signal switches until 5 dashes appear in the odometer window.
2. Enter the first digit of your PIN by pressing the LEFT turn signal switch (X) times.
3. Press the RIGHT turn signal switch 1 time to move to the next digit.

What are the problems with a Harley Davidson starter?

Harley Davidson Common Starter Problems Summary and Fixes – YouTube There are a few very common HD Starter problems. It starts with pushing the start button on only hearing a There are a few very common HD Starter problems. It starts with pushing the start button on only hearing a Skip navigation Sign in Search Loading…

Why is the start button not working on my Harley Davidson?

If you did NOT read 12 volts, you would have to go back to the TSSM and hot wire (bypass it) in order to determine where the problem was. Also testing the start button would be something to check also. The key point to remember is that the “Start Relay Control” comes from the TSSM.

Why does my Dyna FXDC bike not start?

Alarm, clutch inhibit & neutral safety all come from the TSSM. The TSSM controls the start relay. 09 Dyna FXDC, got power everywhere. Lights,Horn,Turn`s,Fuel Pump,Dash, Turn the key on, hit the run/stop switch, push the start button and Nothing. Not even a click or a buzz. Bike has been sitting for about 2 weeks.

What to do when your bike won’t start?

Linduy, Clean and tighten all connections from battery to the starter and all grounds, as this can be a big issue on bikes. Have battery tested at auto parts store, a lot offer free battery testing and can give you print out of the status on battery.

What should I do if my Harley Davidson won’t start?

Here’s where to start your search when your bike won’t start and you have no idea why. This article applies to the Harley Davidson Touring models (2009-present). So the weekend has finally arrived. Boots on, gloves, jacket and helmet: check. You even checked your tires: 36 front and 38 rear.

Alarm, clutch inhibit & neutral safety all come from the TSSM. The TSSM controls the start relay. 09 Dyna FXDC, got power everywhere. Lights,Horn,Turn`s,Fuel Pump,Dash, Turn the key on, hit the run/stop switch, push the start button and Nothing. Not even a click or a buzz. Bike has been sitting for about 2 weeks.

Why does my key fob on my Harley stop working?

When you lock your Harley using your key fob, the security system activates, which means you won’t be able to start the bike again without pressing the key fob. If the key fob stops working, you could be faced with a beautiful motorcycle that won’t take you anywhere. This guide will shine some light on the possible culprit.

What to do if your bike won’t start?

1) Place Bike in NEUTRAL. 2) Remove the fuse cover and locate the start Relay. It is the GRAY one. On the inside cover there is a label that will identify the START Relay. 4) Look at the bottom of the removed gray relay closely. You will see pin notation as follows. 87,,87A,,30,,85,,86. 5) Leave the relay REMOVED from the bike.