What kind of engine does a Kawasaki MULE have?
The combination of a quiet-running liquid-cooled V-Twin engine with a sound-insulated engine box and turf tires made it possible to handle the toughest jobs with a quiet and light “footprint.” With the MULE™ 2500 series setting industry standards, Kawasaki introduced the MULE 2500 utility vehicle.
Why is my Kawasaki MULE PRO FX so loud?
One of the reasons I chose the Mule Pro-FX was reviews I read describing the Mule as quiet. I am disappointed about how loud my Mule is especially after installing a windshield, roof, and rear panel.
When did the Kawasaki MULE 2520 come out?
In 1993, sales of the MULE™ 2520 utility vehicle, the second in the MULE 2500 series, began. The combination of a quiet-running liquid-cooled V-Twin engine with a sound-insulated engine box and turf tires made it possible to handle the toughest jobs with a quiet and light “footprint.”
What’s the noise level on a Kawasaki ATV?
Retested after only adding dampener mat to lower rear panel: 91 DB; no noticeable change. Then I added a 3/4″ OSB floor under the seat with foam tape around the edges. I really thought this would solve the problem, but again, there was no noticeable change in the drone sound or DB level.
One of the reasons I chose the Mule Pro-FX was reviews I read describing the Mule as quiet. I am disappointed about how loud my Mule is especially after installing a windshield, roof, and rear panel.
Retested after only adding dampener mat to lower rear panel: 91 DB; no noticeable change. Then I added a 3/4″ OSB floor under the seat with foam tape around the edges. I really thought this would solve the problem, but again, there was no noticeable change in the drone sound or DB level.
Where to get a Kawasaki MULE repair manual?
You need to order a Kawasaki repair manual for your Mule if yoy plan to do your own service and repair work. But to see what you should see go to Kawasaki.com or th the Kawasaki parts vendor that is has a link to their site on the header to this forum, and is the sponser of this site.
What’s the worst noise when pulling a hill?
The noise when pulling a hill is the worst. I hoped the the Hard Cab rear panel would reduce noise with the panel the goes between the engine and the space under the seat, but didn’t realize the closing in the cab would actually make it considerably louder.
Best-known for industrial and agricultural applications, the Mule, was originally powered by a 617-cm3 V-Twin engine. But consumer demand for improved power delivery and fuel efficiency soon compelled Kawasaki to upgrade the quad with a 953-cm3 fuel-injected diesel engine in 2000.
Are there any problems with the Kawasaki MULE 2510?
Kawasaki Mule 2510 Problems 1 Crank/Turn-Over Issues. Difficulties with starting your Mule can be traced back to clogged intake/fuel lines, discharged battery, or a dirty spark plug/carb – to name a few. 2 Drivetrain Chatter. 3 Primary Clutch Inspection 4 Belt Inspection and Reasons for Slippage 5 Overheating Engine. …
How many seats does a Kawasaki MULE 3010 trans4x4 have?
At first glance the MULE 3010 Trans4x4®looked like other 3000 Series MULEs. But the Trans4x4 featured two rows of seats, enabling it to accommodate four passengers. Being easily able to switch between two-passenger and four-passenger modes gave the Trans4x4 much greater flexibility.
When did the Kawasaki MULE 500 come out?
In 1991, the MULE™ 500 utility vehicle was also introduced. This personal-sized utility vehicle was compact in size, easy to use, and could easily fit into the back of a pick-up truck for transportation to work sites.
What are the specs of a Kawasaki MULE?
(2) LED headlights **Curb weight includes all necessary materials and fluids to operate correctly, full tank of fuel (more than 90 percent capacity) and tool kit (if supplied). All MULE™ PRO Series side x side’s Rollover Protective Structure (ROPS) meets the performance requirements of ISO 3471.
What should I know about Kawasaki MULE side X side?
All MULE™ PRO Series side x side’s Rollover Protective Structure (ROPS) meets the performance requirements of ISO 3471. KAWASAKI CARES: Read Owner’s Manual and all on-product warnings. Always wear protective gear appropriate for the use of this vehicle. Never operate under the influence of drugs or alcohol.
At first glance the MULE 3010 Trans4x4®looked like other 3000 Series MULEs. But the Trans4x4 featured two rows of seats, enabling it to accommodate four passengers. Being easily able to switch between two-passenger and four-passenger modes gave the Trans4x4 much greater flexibility.
In 1993, sales of the MULE™ 2520 utility vehicle, the second in the MULE 2500 series, began. The combination of a quiet-running liquid-cooled V-Twin engine with a sound-insulated engine box and turf tires made it possible to handle the toughest jobs with a quiet and light “footprint.”
For those really tough jobs, Kawasaki offered the MULE 3010 Trans4x4 Diesel. Its powerful 953 cm3diesel engine churned out mountains of torque for serious hauling and towing capability. Coil-reinforced shocks for the De Dion axle and leaf-spring rear suspension ensured a high load capacity.
Where can I buy Kawasaki MULE side by side parts?
We have the Kawasaki OEM side by side parts for the Mules that don’t necessarily have a year designation. They still need service and repair so Partzilla has you covered. Order your Mule parts right here with our low price guarantee!
When did the Kawasaki MULE 3010 come out?
2007 & Prior Kawasaki MULE 3010 DIESEL 4X4 (KAF950-B2) Original Equipment Manufacturer Parts at Babbitts Kawasaki Partshouse
How much does a Kawasaki MULE mower cost?
Starting at $160 /mo with Affirm. Prequalify now Starting at $118 /mo with Affirm. Prequalify now Starting at $68 /mo with Affirm. Prequalify now Starting at $46 /mo with Affirm. Prequalify now Starting at $37 /mo with Affirm.
Kawasaki mule 3010, 2510, 4010 diesel engine replacement conversion to gasoline engine. KAF950 models Got a Kawasaki 2510, 3010 4010 Diesel Mule with a blown up or damaged broken engine and need a new replacement?
Why is the fuel pump on my Kawasaki MULE not working?
I have kawasaki Mule transport. Ran fine till yesterday. Cranks right up but after few seconds its like its getting no fuel and the choke will make it run just a little longer but finally quits.. Also fuel is coming out of the overflow hose when its trying to run. New fuel pump and filter.
Do you need a harness for a carbureted Kawasaki MULE?
Yeah if you’re contemplating changing the engine to a carbureted engine, you’ll need a harness, CDI, fuel pump relay, fuel tank, fuel pump, hoses, engine (complete-the block is slightly different), voltage regulator, and a bunch of other stuff to make it right. It all adds up, and fast.
Are there any problems with the Kawasaki MULE 4010?
Yes fuel pumps have been problematic but the 2012 and newer pumps have addressed many of the issues. Mainly the pressure relief valve and fuel filter. It is impossible to get an “old style” pump…the part numbers have been superceded to the new style. Might pick up a service manual too.
Powered by a liquid-cooled 454 cm3 twin-cylinder engine mounted in an open-cab utility chassis with independent front and rear suspension, and rolling on four all-terrain tyres with rear differential lock feature, the MULE 1000 utility vehicle was an immediate success.
What kind of vehicle is the Tenderfoot mule?
Nicknamed the “Tenderfoot” MULE™, this medium-class “turf” MULE utility vehicle was specially designed for use on golf courses, sporting fields and other places where a soft “footprint” is important.
When did the Kawasaki MULE PRO-FXT come out?
In 2015, Kawasaki changed the utility side x side market with the introduction of the MULE PRO-FXT™. Since the inception of the MULE over 35 years ago, and with over 130 years of Kawasaki Heavy Industries, Ltd. engineering, the latest edition of the MULE PRO-FXT has become a truly innovative new way to work and play.
What kind of vehicle is the Kawasaki MULE?
With the MULE 2500 series setting industry standards, Kawasaki introduced the MULE 2500 utility vehicle. With most of the same features as the MULE 2510, this 2WD fully automatic version was a class leader. The release of the 4WD MULE 3010, turf MULE 3020 and 2WD MULE 3000 marked the latest evolution in Kawasaki’s MULE history.
How many seats does a Kawasaki MULE 3010 have?
At first glance the MULE 3010 Trans4x4 looked like other 3000 Series MULEs. But the Trans4x4 featured two rows of seats, enabling it to accommodate four passengers. Being easily able to switch between two-passenger and four-passenger modes gave the Trans4x4 much greater flexibility.
Which is the second in the Mule series?
Sales of the MULE 2520 utility vehicle, the second in the MULE 2500 series, began. The combination of a quiet-running liquid-cooled V-Twin engine with a sound-insulated engine box and turf tyres made it possible to handle the toughest jobs with a quiet and light “footprint.” MULE 2510 (KAF620-A) MULE 2010 (KAF540-C)
The combination of a quiet-running liquid-cooled V-Twin engine with a sound-insulated engine box and turf tires made it possible to handle the toughest jobs with a quiet and light “footprint.” With the MULE™ 2500 series setting industry standards, Kawasaki introduced the MULE 2500 utility vehicle.
When did the Kawasaki MULE 550 come out?
In 1997, sales of the MULE™ 550 utility vehicle began. Newly designed, its fan-cooled engine with internal engine balancer and proven four-wheel suspension gave the MULE 550 a relaxing ride quality.
In 2015, Kawasaki changed the utility side x side market with the introduction of the MULE PRO-FXT™. Since the inception of the MULE over 35 years ago, and with over 130 years of Kawasaki Heavy Industries, Ltd. engineering, the latest edition of the MULE PRO-FXT has become a truly innovative new way to work and play.