What happens if you lose your security FOB on a Harley Davidson?
If you have a security-equipped Harley-Davidson, you know that without your key fob present, the bike will not start. What you should also know is your PIN number, just in case you lose your key fob mid-ride. If you bought your bike new from the dealer, this information should have been given to you, but that is not always the case.
How do you turn on the FOB on a Harley Davidson?
If your fob is not present, turn the ignition switch to “on” and the security light will begin to flash. Press and hold the left turn signal until you see “Enter PIN” flash on the speedometer.
What should I know about my security FOB?
What you should also know is your PIN number, just in case you lose your key fob mid-ride. If you bought your bike new from the dealer, this information should have been given to you, but that is not always the case. If your bike has security, as well as the fob it can have a backup PIN.
How can I change the pin on my bike FOB?
If your bike has security, as well as the fob it can have a backup PIN. It will be a five-digit number that your local dealer can change or set for you using the Digital Tech system. Once you know your PIN you can change it at any time yourself; follow the instructions in your owner’s manual. The process is very easy to do.
How does the security system work on a Harley Davidson?
The security system on the Harley Davidson Touring allows you to use your key fob to activate it, which prevents you from starting the bike until you deactivate it with your key fob again. Sometimes, you can get stuck and can’t deactivate the security system, or you lost the key fob and want to override it.
When do I need to replace my Harley key fob?
If a code is not assigned or recorded and the Harley key FOB is lost or damaged while the vehicle is armed, the TSSM must be replaced. The TSSM code consists of five digits. Each digit can be any number from 1 to 9. The personal code must be used to disarm the security system in case the Harley key FOB becomes unavailable.
Do you need to reset the alarm on your Harley?
Let’s assume for simplicity that your code is set at 31313 and you wish to use the manual disarm of the security system using the directional switches as if you lost your fob and cannot disarm the system. Your security system will disarm the bike and it cannot be started without deactivating the system first.
If you have a security-equipped Harley-Davidson, you know that without your key fob present, the bike will not start. What you should also know is your PIN number, just in case you lose your key fob mid-ride. If you bought your bike new from the dealer, this information should have been given to you, but that is not always the case.
The security system on the Harley Davidson Touring allows you to use your key fob to activate it, which prevents you from starting the bike until you deactivate it with your key fob again. Sometimes, you can get stuck and can’t deactivate the security system, or you lost the key fob and want to override it.
If a code is not assigned or recorded and the Harley key FOB is lost or damaged while the vehicle is armed, the TSSM must be replaced. The TSSM code consists of five digits. Each digit can be any number from 1 to 9. The personal code must be used to disarm the security system in case the Harley key FOB becomes unavailable.
Can you assign two FOBs to a Harley?
If your Harley key FOB is ever lost, damaged, or stolen, you can easily assign a new key FOB to your Harley. It is also possible to have two FOBs assigned at once. Bob demonstrates the assignment sequence in this video.
When did the Harley Davidson Dyna Wide Glide come out?
1993: The Dyna Low Rider and Dyna Wide Glide are introduced, the two among the most popular Dyna models throughout the frame’s 26 year production run. 1995: Until this year, all Dynas had a 32-degree front rake, but in 1995 a more responsive 28-degree rake was introduced to the sportier Dyna models.
How does the turn signal work on a Dyna Glide?
This article applies to the Harley Davidson Dyna Glide. There are many modules on your Harley Davidson that track as well as monitor the state of your powertrain and accessories. The Turn Signal Security Module monitors the signals and the alarm system for the bike. When there is a problem, the red light key will illuminate.
If your fob is not present, turn the ignition switch to “on” and the security light will begin to flash. Press and hold the left turn signal until you see “Enter PIN” flash on the speedometer.
How many digits are in the Harley key fob?
The TSSM code consists of five digits. Each digit can be any number from 1 to 9. The personal code must be used to disarm the security system in case the Harley key FOB becomes unavailable. Harley uses the same five digit pin for all TSSM equipped motorcycles.
What does a key fob do on a bike?
Your key fob has one main function and that is to offer you easy access to your bike. In other words, your key fob allows you to unlock your bike. In a matter of moments, you can hop onto your seat, quickly crank your engine, and then head off to your destination without needing to fumble around with a traditional valet key.
Your key fob has one main function and that is to offer you easy access to your bike. In other words, your key fob allows you to unlock your bike. In a matter of moments, you can hop onto your seat, quickly crank your engine, and then head off to your destination without needing to fumble around with a traditional valet key.
If your bike has security, as well as the fob it can have a backup PIN. It will be a five-digit number that your local dealer can change or set for you using the Digital Tech system. Once you know your PIN you can change it at any time yourself; follow the instructions in your owner’s manual. The process is very easy to do.
Can a key fob be used to start a bike?
You are not going to believe this – but – it was the battery in the key fob. The bike has to have a signal from the key fob before it will allow the bike to start. The TSSM is the – turn signal security module ( Japan & Korean markets only) I asked the dealer is they could test the ECM and they said yes if it on the bike.
Where is the FOB on a Harley Davidson?
If you use the fork lock then you are really screwed and there is no way around that other than to get the key and unlock them. You need to be within about 5 feet of your bike with the key fob to get the bike started. So, say your key fob is on the work bench or key hook in your garage near your Harley.
You are not going to believe this – but – it was the battery in the key fob. The bike has to have a signal from the key fob before it will allow the bike to start. The TSSM is the – turn signal security module ( Japan & Korean markets only) I asked the dealer is they could test the ECM and they said yes if it on the bike.
What you should also know is your PIN number, just in case you lose your key fob mid-ride. If you bought your bike new from the dealer, this information should have been given to you, but that is not always the case. If your bike has security, as well as the fob it can have a backup PIN.
Do you need a back up FOB on a Harley Davidson?
The process is beyond simple. It is an excellent idea to have an extra FOB assigned for back up, but it is not completely necessary. It is necessary, however, to assign your own personal pin number to your motorcycle.
How does the security system work on a Ford?
There are two security features on a Ford. One is a personal alarm system that makes a loud noise if someone tries to break into the vehicle. This is turned on and off using a remote control key. The other system is a passive system called the Securilock. This prevents the engine from starting without the use of a coded ignition key.
How to turn off security system on Harley Davidson?
Pressing the right button one last time after entering the 5th digit finalizes it (skip that for push button fobs), turning off the bike saves it in security system’s memory.
When do I need to program my Harley Davidson key fob?
If your model year is 2007 or later, see your dealer. 2007-present Touring bikes are equipped with the Smart Security System, which prevents bike owners from programming their key fob (s) on their own. If you need to start your bike without using your key fob, simply enter your security code per the instructions included in your owner’s manual.
If you use the fork lock then you are really screwed and there is no way around that other than to get the key and unlock them. You need to be within about 5 feet of your bike with the key fob to get the bike started. So, say your key fob is on the work bench or key hook in your garage near your Harley.
If your model year is 2007 or later, see your dealer. 2007-present Touring bikes are equipped with the Smart Security System, which prevents bike owners from programming their key fob (s) on their own. If you need to start your bike without using your key fob, simply enter your security code per the instructions included in your owner’s manual.
What should I do if my key fob stops working?
Seeing as I’ve had the car 4 years and not ever changed the battery in the fob, I just assumed it was dead so I changed the battery for another today, but it didn’t do the trick. My dad tested the battery I originally had in the fob and it was in fully working order, so it was not dead. Does anyone know what might be the problem?
What does the remote key fob on a Ford do?
by Allen Moore. The remote entry fob from Ford Motor Company is a convenience device that allows you to lock or unlock your Ford’s doors from a distance without a key. The remotes work on a preprogrammed radio signal that transmits to a receiver inside the vehicle.
What to do if your key fob is not working?
If the key fob is still not working, move on to Step 3. Resetting the key fob will work as if you have bought a new key fob, but only on certain year bikes; usually 2007 and older. If you’ve never changed the security code, it comes automatically factory set as 7-7-7-7-7.