How do you remove a radiator on an ATV?

How do you remove a radiator on an ATV?

1. Remove front tires 2. clamp shut both radiator hoses. ( they sell these at dealership). I borrowed a buddies. 3. remove hoses and drain radiator. 4. On right side there is a small plastic cover held on by 2 plastic push clips. Remove this. 5. Remove fan. It slides right out, after you unplug it. Be careful of tube on it.

What should I do when I Change my radiator?

While the radiator is removed use a garden hose to clean the area including the air conditioner condenser. Disconnect battery cable to avoid short circuits. Replace the thermostat when changing a radiator. Flush the cooling system and install new coolant to protect gaskets and internal engine parts. Replace upper and lower radiator hoses.

How do you remove radiator from can Am?

The 1 hard 1 is up by the bolt that holds the radiator in on the left side 8. Remove radiator bolts and wiggle raditor out. It actually comes out pretty easy 9. Reverse order to put back in. Just had to remove the radiator. It was a pita. But what I did what remove the fan which has 4 bolts.

Can a radiator be removed from an air conditioner?

The air conditioner condenser is often connected to the radiator. To remove the radiator, you will need to remove the condenser mounting bolts with a wrench. This allows the condenser to stay in the engine bay and keeps the refrigerant system closed.

What should I do when I replace my radiator?

With all the hoses and bolts attached, fill the new radiator with coolant. Check oil and transmission fluid levels in case any was lost during the installation. This is an excellent time to flush your coolant system and replace the old coolant with new coolant.

1. Remove front tires 2. clamp shut both radiator hoses. ( they sell these at dealership). I borrowed a buddies. 3. remove hoses and drain radiator. 4. On right side there is a small plastic cover held on by 2 plastic push clips. Remove this. 5. Remove fan. It slides right out, after you unplug it. Be careful of tube on it.

The 1 hard 1 is up by the bolt that holds the radiator in on the left side 8. Remove radiator bolts and wiggle raditor out. It actually comes out pretty easy 9. Reverse order to put back in. Just had to remove the radiator. It was a pita. But what I did what remove the fan which has 4 bolts.

Can you remove a radiator without removing plastic?

Just remove the fan and It will slide out from one side. Getting some of the Plastic shrouds off can fight you a lil but It will come out.. If theres as much room as on my 500 its not too bad. Takes maybe 15-20 minutes. I found it such a pain in the butt.

Posted In Q&A