Are there any problems with the Mitsubishi Fuso?
For decades, it has been popular in several countries for its strength, reliability, and performance. However, like other used diesel trucks, a new or pre-owned Mitsubishi Fuso for sale is no stranger to issues. In this article, we are going to discuss some of the problems that Fighter owners commonly complain about.
How to troubleshoot the air conditioning in a Mitsubishi?
Remove the three instrument panel undercover mounting screws and remove the cover. Unplug and remove the compressor module. Detach the electrical connector from the fan motor, remove the three small bolts holding the motor to the housing and remove the motor and fan.
Why is my air conditioning not working in my Mitsubishi Galant?
Check the control panel next in your Mitsubishi Galant. If the air conditioning controls are not working at all, then the control panel is likely to blame. Remove the trim plate surrounding the center instrument panel. Detach the electrical connectors and remove the control panel.
Where is the fuse box on a Mitsubishi Galant?
Find the fuse box in a Mitsubishi Galant by opening the drivers side door and prying off the trim panel to the left of the steering wheel. Check the control panel next in your Mitsubishi Galant. If the air conditioning controls are not working at all, then the control panel is likely to blame.
For decades, it has been popular in several countries for its strength, reliability, and performance. However, like other used diesel trucks, a new or pre-owned Mitsubishi Fuso for sale is no stranger to issues. In this article, we are going to discuss some of the problems that Fighter owners commonly complain about.
What is the temp sensor code for a 2010 Mitsubishi Fuso?
I KNOW THEY ARE 2010 MITSUBISHI FUSO CODES P1421 AND P1422. I KNOW THEY ARE TEMP SENSOR CODES BUT WHAT TEMP SENSOR IS IT REFERRING TOO AND WHERE IS IT LOCATED … read more
What happens if your Mitsubishi aircon does not work?
If your Mitsubishi aircon does not work properly then condenser of the Aircon may get frozen and you your aircon may stop working completely. You can easily avoid this problem just by taking good care of your aircon with the help of regular maintenance and services.
What are the VIN numbers for a 2010 Mitsubishi Fuso?
2010 MITSUBISHI FUSO CODES P1421 AND P1422. I KNOW THEY ARE TEMP SENSOR CODES BUT WHAT TEMP SENSOR IS IT REFERRING TOO AND WHERE IS IT LOCATED … read more VIN: JL6BBG1S98K020296 Year: 2008 Make: Mitsubishi Fuso Model: FE84D Engine Type: L4, 4.9L (4899 cc); Turbo-Air CooledWhat is the proceedure for performing a regen on this vehicle?
What happens if your Isuzu NPR, Mitsubishi Fuso, Hino or UD?
If the cooling system in your medium-duty Isuzu NPR, Mitsubishi Fuso, Hino or UD Truck isn’t working properly, the engine could end up overheating. If your engine overheats significantly, it may suffer extreme failure. To know whether or not your engine is overheating, and what might be causing it, you need to do some troubleshooting.
Why does my Fuso Fighter have blue smoke coming from the tailpipe?
When the level drops faster than it is supposed to, then it is likely that you are losing oil. Also, the color of your exhaust smoke tells something about your engine. If you see blue smoke coming from the tailpipe, then it means that oil is starting to leak into the engine.
Why does my Isuzu NPR overheat in hot weather?
If there is steam coming out of the tailpipe, then your head gasket has failed, and this is likely causing your engine to overheat due to engine coolant leaking into the combustion chambers instead of cooling the engine. The coolant level is low. In hot weather, the coolant in your engine can get low by evaporating through the overflow reservoir.
What happens when a transmission sensor goes bad?
This may cause the transmission to shift roughly or more quickly than normal. It’s also common that a problem with these sensors can impact the shift timing, extending the interval between transmission shifts. An automatic transmission is hydraulically controlled and designed to shift smoothly.
Why does Autoshift not go into any gears?
When i have the truck off and turn key to start position and try to shift gears i can hear the transmission shifting successfully, however once the engine is running it will not shift gears. There are no service lights or error codes being displayed.
Can a bad speed sensor affect shift timing?
Harsh or improper shifting. Without a valid speed signal from these sensors, the PCM will not be able to correctly control the shifting of gears within the transmission. This may cause the transmission to shift roughly or more quickly than normal. It’s also common that a problem with these sensors can impact the shift timing,…
Why do I have a problem with my fuel injection pump?
Fuel injection problems, therefore, are one of the most pressing engine issues to deal with. Whether you’ve experienced fuel injector failure or not, it helps to understand the fuel injector pump, how it relates to engine performance, and also how diesel fuel injection pumps differ from traditional gasoline-powered units.
How much psi does a fuel injector pump use?
Around 15-20 years ago, it was common for fuel injector pumps to process fuel in a system at around 10,000 to 15,000 psi (pounds per square inch). But that’s only about half of what engines are expected to do today.
Can a Fuso be used as a camper?
The “not” part of that question is easy. They were not designed for each other. The Fuso’s cab is too high. The Fuso’s bed is not a standard pickup length or width. In many ways, putting a Fuso and a truck camper together is like taking an apple and an orange and trying to make a banana. None of that deterred Dick.
What kind of transmission does a Fuso Canter have?
We have Mitsubishi fuso canter with duonic transmission. We have Mitsubishi fuso canter with duonic transmission. When you drive by freeway easy change the gears & run okay. But when you slow … read more Auto Mechanics 1&2/diesel… I am about to buy a 2005 Mitsubishi FUSO rollback tow truck.
What causes a toasty cabin on a Fuso Fighter?
Since the Fuso Fighter is typically used for industrial applications, one of the first issues that operators notice is a toasty cabin. In most cases, this has something to do with the AC condenser. The AC condenser is an essential part of the cooling system.
Can a bad throttle position sensor cause idle surging?
Idle surging can be caused due to other issues in the car, but if it happens in conjunction with other throttle position sensor symptoms, the culprit is often the TPS. At idle, the ECM will not get the correct information and the throttle will variate randomly causing idle surges. 3) Check Engine Light
Why does my ECU think my foot is on the throttle?
Any deviation in throttle shaft position (due to shaft wear) will create uneven signals to be generated by the TPS reacting to this deviation. If closed TPS voltage changes, the ECU may assume that your foot is on the throttle, causing a richer fuel mixture to be delivered. This can also be caused by a faulty TPS, or even a poor ground.
https://www.youtube.com/watch?v=4pFvbq30S2Y
How to troubleshoot a no start Ford 4.9L?
Once you’re tapped in, have a helper crank the engine while you observe your multimeter in Volts DC mode. If voltage is present (12 Volts), then you have confirmed that the fuel pump fuse, fuel pump relay and inertia switch are working perfectly.
What causes no start on a Ford pick up?
If no voltage is present, as your helper cranks the engine, then the cause of no fuel condition is due to either a bad fuse, fuel pump relay, or inertia switch. One of the most overlooked areas, when testing a hard to diagnose no start, is the mechanical condition of your 4.9L, 5.0L or 5.8L Ford car, pick up, van or SUV.
What does it mean when your fuel pump is not working?
Fuel pump inertia switch. And so, there’s no need to spend time testing them or money replacing them. CASE 2: Fuel pressure is not present. This usually means that the pump has failed, but not always. I would recommend testing/checking the following before condemning the fuel pump:
Can a 6.0 shut off while driving no codes?
Once again let it sit for about 10 minutes and it fired right back up and will run with no problem> made it to an autozone checked for codes NONE. I drove it for another 2 hours and it never missed a lick. The next day i drove it maybe 20 minutes and it died again.
How to reconnect memory clear switch Mitsubishi Fuso?
Reconnect memory clear switch to erase DTCs. 3. Mitsubishi Fuso: Diagnostic Trouble Code Interpretation Control unit turns light off for 2.4 seconds after diagnosis and displays the code. The first digit of code illumination for 1.2 seconds and turns off for 1.2 seconds.
Where is the Diagnostic Code Switch on a Mitsubishi Fuso?
With diagnosis switch removed, remove Memory Clear Switch, warning lamp will start flashing codes, record codes. The memory switch is also located at rear of relay and fuse box. Reconnect memory clear switch to erase DTCs. 3. Mitsubishi Fuso: Diagnostic Trouble Code Interpretation
What causes lack of power in an Isuzu truck?
Weak valve springs. Burned or sticking valves. Poor cylinder compression pressures. Engine brake exhaust valve stuck in closed position. Worn camshaft lobe. Intake manifold air leakage. Air leak at turbocharger turbine housing. Blocked air cleaner assembly. Blocked engine exhaust system. Bad fuel or no fuel. Bad fuel transfer pump.