How to troubleshoot the air conditioning in a Mitsubishi Galant?
Remove the trim plate surrounding the center instrument panel. Detach the electrical connectors and remove the control panel. Listen for the blower motor while adjusting the controls. Get to the blower motor in your Mitsubishi Galant by first disabling the airbags. Disconnect the negative battery cable.
Where is the fuse box on a Mitsubishi Galant?
Find the fuse box in a Mitsubishi Galant by opening the drivers side door and prying off the trim panel to the left of the steering wheel. Check the control panel next in your Mitsubishi Galant. If the air conditioning controls are not working at all, then the control panel is likely to blame.
How to troubleshoot the air conditioning in a Mitsubishi?
Remove the three instrument panel undercover mounting screws and remove the cover. Unplug and remove the compressor module. Detach the electrical connector from the fan motor, remove the three small bolts holding the motor to the housing and remove the motor and fan.
Why is my air conditioner not working properly?
If they seem to work fine but have effect on the air then the problem is probably a simple blown fuse. If the controls do not work correctly then the problem is probably with the control panel. If you cannot hear the sound that accompanies turning the air from low to high then the problem is likely with the blower motor.
Remove the trim plate surrounding the center instrument panel. Detach the electrical connectors and remove the control panel. Listen for the blower motor while adjusting the controls. Get to the blower motor in your Mitsubishi Galant by first disabling the airbags. Disconnect the negative battery cable.
Find the fuse box in a Mitsubishi Galant by opening the drivers side door and prying off the trim panel to the left of the steering wheel. Check the control panel next in your Mitsubishi Galant. If the air conditioning controls are not working at all, then the control panel is likely to blame.
Remove the three instrument panel undercover mounting screws and remove the cover. Unplug and remove the compressor module. Detach the electrical connector from the fan motor, remove the three small bolts holding the motor to the housing and remove the motor and fan.
If they seem to work fine but have effect on the air then the problem is probably a simple blown fuse. If the controls do not work correctly then the problem is probably with the control panel. If you cannot hear the sound that accompanies turning the air from low to high then the problem is likely with the blower motor.
Where are the fuse panels on a Mitsubishi Galant?
Here you will find fuse box diagrams of Mitsubishi Galant 2010, 2011 and 2012, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout). Information from the owner’s manuals of 2010, 2011 and 2012 is used.
What causes a blower motor to not come on?
It has a fusible link (shared with a ton of stuff), a fuse, power delivered through the relay to the blower. Your only probable failures are blower fuse, relay, relay fuse. With all checking out OK, it would appear that there may be a wiring issue between the relay and the blower. This is fairly uncommon however.
Where are the fuses on a blower motor?
In the drivers end cap there will be two large green fuses just outside of the main fuse area, these are both 30A fuses, check these fuses visually by removing them (specifically #6) Okay #20, 7.5A? We are running low on options here….. last thing to check on the power side is the relay
Where did the Mitsubishi Galant get its name?
The Mitsubishi Galant was provided by the company from 1969 till 2012. The name of this model derived from the French word “galant”, which is translated into English as “chivalrous”. In general there were nine generations of this model.
When did the Mitsubishi Galant 3 generation come out?
Mitsubishi production was continued by the new Sigma Motor Corporation. The third generation of the car was introduced in 1976, and was known as Galant Σ (Sigma). In many export markets the car was simply known as the Galant.
What was the gross power of a Mitsubishi Galant?
Gross power claimed was 97 PS (71 kW) at 6700 rpm and the car was fitted with Rostyle wheels as also used on locally assembled Hillman Vogues. From 1970, a fastback coupé model was developed, the Galant GTO.
When did Mitsubishi stop making the Lancer Galant?
Between August 2015 to August 2017, GHK Motors (Mitsubishi Brunei) has offered a version of the Lancer Sportback under the name “Galant” in Brunei. The Galant’s production ceased at the end of August 2017 due to poor sales, because of comparing to the Lancer sedan.
When did the Mitsubishi Galant air suspension come out?
This Galant began American sales in 1989 side by side with the previous generation Sigma. Mitsubishi developed Dynamic ECS adaptive air suspension, the world’s first production semi-active electronically controlled suspension system in passenger cars; the system was first incorporated in the 1987 Galant model.
What are the specs of a 2006 Mitsubishi Galant?
The current Galant has a more rigid platform than its predecessor. Built on a 108.3-inch wheelbase and riding standard 16-inch tires, the sedan is 190.4 inches long overall and 72.4 inches wide. Track widths approach 62 inches. Styling features include an angular nose, center grille pillar and a high rear deck.
Is the Mitsubishi Galant available in New Zealand?
Todd Motors initially assembled 1.6 GL, 1.85 GLX and two-litre GLS sedan models for New Zealand, with the GLS getting a five-speed manual transmission as standard with three-speed auto optional. These were the first NZ-assembled Mitsubishis to have rear screen demisters as standard.
What’s the difference between a 2006 Galant and a 2005 Galant?
Interior enhancements, including bright gauge accents and a multifunction computer, are notable changes for the 2006 model year. The current Galant has a more rigid platform than its predecessor.
Where does the HVAC go in a Mitsubishi?
As the vehicle is driven, air flow under the hood forces HVAC drainage back past the grommet and into the vehicle, where it collects on the driver’s side floorboard.
Why does my HVAC overflow on my Mitsubishi?
A Mitsubishi owner may complain of water on the front driver’s side floor of the vehicle. The HVAC drain tube can become blocked by internal foam packing material or by external debris entering the front cowl area. If this occurs, the HVAC case may fill up with condensation and overflow onto the passenger’s side floorboard.
When did the Mitsubishi blower motor come out?
The model number from the sticker on the motor is CSA431D214A and Made in Japan by Mitsubishi Heavy Industries, LTD. A Google search for that model number only returns a few hits and they are all European. My car was manufactured in March of 2007 and the blower motor shows a manufacture date of February 2007.
How much does it cost to replace blower motor on Mitsubishi Outlander?
If the blower motor fails its functional test in should be replaced along with the failed blower motor resistor. The average cost for a Mitsubishi Outlander Blower Motor Replacement is between $308 -$318. Learn More
How to fix a Mitsubishi Endeavor AC transistor blower?
To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: tvpw3ht_A8oyijHQ)