When did the Ford Sable become a full size car?
From the 1986 to 2005 model years, the Sable was produced as a mid-size vehicle; four-door sedan and five-door station wagon body styles were offered. For 2006, the Sable was withdrawn, replaced by the full-size Montego and mid-size Milan. For 2008, the Sable was reintroduced as a full-size car, offered solely as a four-door sedan.
What kind of transmission does a Mercury Sable have?
The first-generation Mercury Sable was sold in two trim levels, in line with other Mercury models: base-trim GS and top-trim LS. As the first-generation Sable was never sold with a manual transmission, there was no equivalent to the Taurus MT-5 or Taurus SHO.
What kind of suspension does a Ford Sable have?
The first-generation Sable used the front-wheel drive Ford DN5 platform, sharing its 106 in (2,692 mm) wheelbase with the Ford Taurus. As with its Marquis predecessor, the Sable used unibody construction. The Sable is equipped with four-wheel independent suspension.
What kind of car is a 2009 Mercury Sable?
The Used 2009 Mercury Sable is offered in the following submodels: Sable Sedan. Available styles include Premier 4dr Sedan (3.5L 6cyl 6A), 4dr Sedan (3.5L 6cyl 6A), Premier 4dr Sedan AWD (3.5L 6cyl 6A), and 4dr Sedan AWD (3.5L 6cyl 6A).
What kind of Cam does a LS3 cylinder head need?
The LS3 cams are designed for rectangle port cylinder heads. They’re also designed to clear the LS3’s true flat-top pistons with minimum hassle. The Stage 3 cam allows you to mill the heads for more compression.
Which is the Best LS Cam for a mountain bike?
The Summit Stage 3 LS cam is a great cam for a weekend warrior. It has a lopey idle, but tunes well with a minimum of hassle. It uses state-of-the-art lobe designs to pull strongly past 7,000 rpm with as little as 150 lbs. of seat pressure.
How to choose the right Summit Racing pro LS Cam?
Summit Racing Pro LS Truck Camshafts 1 The Stage 1 and Stage 2 truck cams are designed to work well with the stock converter. 2 The Stage 3 truck cam works well with a stock stall, but a 2,500 is recommended. 3 The Stage 4 truck cam makes great power with a killer idle. It hits hard at 2,800-3,000 rpm –and keeps pulling through 6,800 rpm.
What are the closing points on a pro LS Cam?
Pro LS Truck cams are designed to make power where it’s needed. The truck cams have intake closing points between 36 and 41 degrees after bottom dead center (BDC) for maximum punch where the converter hits. The Stage 1 and Stage 2 truck cams are designed to work well with the stock converter.
From the 1986 to 2005 model years, the Sable was produced as a mid-size vehicle; four-door sedan and five-door station wagon body styles were offered. For 2006, the Sable was withdrawn, replaced by the full-size Montego and mid-size Milan. For 2008, the Sable was reintroduced as a full-size car, offered solely as a four-door sedan.
When was the Mercury Sable replaced by the Montego?
Mercury Sable. Introduced for the 1986 model year, the Sable served as the replacement for the Mercury Marquis, marking the transition of the mid-size Mercury product range to front-wheel drive. After the 2005 model year, the Sable was removed from the Mercury line, effectively replaced by the Mercury Milan and Mercury Montego.
When was the Mercury Sable front wheel drive introduced?
Introduced on December 26, 1985 as the replacement for the Mercury Marquis, the Sable marked the transition of the mid-size Mercury product range to front-wheel drive. For its entire production life, the Sable served as the Mercury counterpart of the Ford Taurus (no Sable equivalent of the Taurus SHO was ever produced),…
How much horsepower does a Mercury Sable have?
Although the power output was rated at the same 140 hp (104 kW) as the 3.0 L engine, this large V6 produced 215 ft·lbf (291 N·m) of torque, a welcome addition, especially in the heavier station wagons.