Where are the tumblers on an ignition lock cylinder?
Place it on the corresponding spot on the paper key diagram. Continue to remove each of the tumblers from the old cylinder, and use the template (or make a note) to remember their position relative to the key. The tumblers are located on the top and bottom of the cylinder and are stamped with numbers to aid identification.
How do you replace an ignition lock cylinder?
Note the numbers on the old tumblers and record them relative to their position on the key. Insert the key into the new cylinder and turn it to the accessory position. Remove the cylinder from its casing and then remove the key. Use a small screwdriver to remove the first tumbler closest to the key side.
Where is the key in the lock cylinder?
Insert the key into the ignition lock cylinder. 1.2. Rotate the lock cylinder core to START. 1.3. Press the lock cylinder core retainer located in the end of the ignition lock cylinder. 1.4. Pull the ignition lock cylinder core out of the lock cylinder housing using the key. 5.
What are the symptoms of a bad ignition lock cylinder?
If the ignition lock cylinder wear out or breaks, it may prevent the vehicle from starting when the key is inserted and turned. 3. Issues inserting and removing the key. Issues with inserting and removing the key are another symptom of a potential problem with the ignition lock cylinder.
How many types of tumblers are used for ignition lock?
Five types of tumblers are used in making the lock combinations. Each tumbler is coded and stamped with a number between 1 and 5. Ignition Lock Cylinder Coding Tools Required J41340 Ignition Lock Holding Fixture Important: If the original ignition lock cylinder is being RECODED, proceed to step 1.
What’s the name of the ignition lock cylinder?
The ignition lock cylinder is the cylindrical tumbler and key that is used to power on and start the vehicle. While many newer vehicles are now being manufactured with push button and keyless power and starting systems, traditional ignition lock cylinders are still commonly found on many road…
How to find the tumbler numbers on a lock cylinder?
Determine the tumbler numbers and their respective positions. 7.1. Place the tip of the key directly over the tip of the illustrated key. 7.2. Inspect that the diagram outlines the key. 7.3. Starting with position 1, the open end of the lock cylinder, find and record the lowest level tumbler number that is visible. 7.4.
Why is my ignition lock cylinder not working?
The ignition lock cylinder is connected to an electronic ignition switch, they work power on and start the vehicle. If the ignition lock cylinder wear out or breaks, it may prevent the vehicle from starting when the key is inserted and turned. A no start condition can also be caused by a wide variety of other issues,…