Why does the Mercedes-Benz W204 bounce up and down?
The suspension can also be bounced up and down while the car is sitting on the ground. A properly working shock absorber will allow the suspension to compress and settle back to its original position, whereas a faulty shock will allow the suspension to continue to bounce. Figure 2. W204 front strut cutaway. Figure 3. Example of leaking shock.
Why does my car bounce when going over bumps?
When going over bumps, it will bounce up and down like it is on very loose springs, before finally settling. You will feel sharp jolts through the steering wheel as you drive over potholes, bumps, curbs, and other road hazards.
What are the signs of a Mercedes Benz suspension problem?
Signs of failure are common and are often accompanied with a “creaking” noise from the suspension. Other components such as wheel bearings, ball joints and sway bar links should be inspected at the same time.
Why is the suspension on my C class so bouncy?
If the ride of your C-Class has become noticeably bouncy, you may have a blown out or leaking shock (s). The shocks in the suspension system dampen the motion of the springs as the suspension works up and down.
Why does my car bounce when going over speed bumps?
Recently I have noticed something strange with my 05 745i (non-sports package) rear suspension. When I go over speed bumps in a parking lot, in an angle, meaning the car is not at a 90-degree angle with the speed bump, at very low speeds, the rear end (both sides) goes to an excessive bouncing for 3-4 seconds.
How to turn off bounce mode on Mercedes GLS?
From there, go to the Assistance menu from the home screen, select Offroad Assistant (the car needs to be in gear to access this menu), then Free Driving Assist. Once this is selected, the air suspension starts pumping, and the car starts gettin’ jiggy wit it. You can either hit Stop on the screen or drive faster than nine mph to shut it off.
Signs of failure are common and are often accompanied with a “creaking” noise from the suspension. Other components such as wheel bearings, ball joints and sway bar links should be inspected at the same time.
What makes a Mercedes Benz front end Shimmy?
These forces can be extreme and cause the rubber bushings to fatigue and crack causing a front-end vibration or shimmy. Signs of failure are common and are often accompanied with a “creaking” noise from the suspension. Other components such as wheel bearings, ball joints and sway bar links should be inspected at the same time.