What is the plastic on my windshield?
Polycarbonate is similar to plastic in that it is strong, but somewhat soft. It is the same material used to create bullet-resistant glass (which is actually polycarbonate sandwiched between glass) and fighter jet windshields.
Can you fix scratched plastic windshield?
Clean the plastic surface with a damp cloth, rubbing in a circular motion around the scratch. Dry the area to remove any dirt which should make the process easier to carry out. Apply a mild abrasive, such as toothpaste, furniture polish, baking soda or plastic polish to the scratch.
How to remove plastic Assembly from windshield washer?
The windshield washer hose has become disconnected from the spray nozzle. I need to remove the large plastic assembly at the bottom of the windshield to get to the hose routing. I’m talking about the plastic tray like thing in the first picture.
How do you remove a plastic wiper cap?
Be sure that the wipers are parked before you do the following first steps. The end of each wiper arm has a plastic cap that simply pops off with a flat screw driver. Then use a 14 mm wrench to undo the nut that holds the wiper arm on. Wiggle the wiper arms back and forth until they pop off their shaft.
What’s the best way to get sticker residue off plastic?
Yes, you can use peanut butter to remove sticker residue off plastic. Dab a small finger-sized amount of peanut butter on the residue. Let it stay for a few minutes. Check if the residue is already soft. If it is, get a clean rag and wipe off the sticky residue together with the peanut butter.
How do I remove plastic Assembly from Subaru Outback?
The end of each wiper arm has a plastic cap that simply pops off with a flat screw driver. Then use a 14 mm wrench to undo the nut that holds the wiper arm on. Wiggle the wiper arms back and forth until they pop off their shaft. In the outside corners of the cowl there is a triangular piece.