Do you turn the key to get the Tumbler out?
Right at the beginning of the video I explain you have to turn the key to get the tumbler out (that is true even with the black cap removed). To get the tumbler out without being able to turn the key he will have to grind the little square pin tower shown in the on demand video at 14:21.
What causes a locked steering wheel to not turn in?
If a locked steering wheel is the only thing preventing your key from turning the ignition, then follow our instructions below for How to Unlock a Locked Steering wheel and you will be back on the road fast. Problem 2. Dirt, pocket lint or debris (like tape from opening a package) may cause your key not to turn in your ignition lock cylinder.
What to do if your ignition key is bent?
Bent keys can sometimes enter the ignition cylinder, but once inside will not line up correctly to allow the car to start. If your key looks visually bent, you can use a non-metal hammer to carefully flatten the key down. Your goal is to use something that will not damage the key, so ideally this would be made of rubber or wood.
What does it mean when your ignition key does not turn?
If it will not move, or moves only very slightly, it is likely locked. A locked steering wheel will not allow the ignition to engage. When you move the wheel back and forth, you will feel it stop abruptly as it comes into contact with the steering wheel lock.
What causes the tumbler Assembly on a ignition switch to jam?
Step 4 – Dirt and debris inside the key lock can cause the tumbler assembly to stick and jam, not allowing one or more of the key followers to operate.
What do you use to service a key lock tumbler?
To service a key lock tumbler, spray pressurized air along with an aerosol cleaner into the lock assembly, once clean apply a light lubricant like liquid graphite or WD40 this can help the lock tumbler release inside the lock cylinder.
If a locked steering wheel is the only thing preventing your key from turning the ignition, then follow our instructions below for How to Unlock a Locked Steering wheel and you will be back on the road fast. Problem 2. Dirt, pocket lint or debris (like tape from opening a package) may cause your key not to turn in your ignition lock cylinder.
What’s the problem with a stuck ignition key?
The biggest problem I found was that each solution was either temporary, expensive, or involved getting a new key. This means that you would end up with one key for the doors, and a different one for the ignition – not the solution I wanted. This instructable will show you how I solved the problem.