How does the fuel distributor work in a car?
The Fuel Distributor meters the fuel based on engine demand (air flow), temperature, load, and emissions tuning. It also distributes the fuel to the 6 pressure-activated fuel injectors. Fuel flow is continuous, as opposed to being pulsed on and off as in modern Electronic systems.
What to do if your fuel distributor has failed?
If the Fuel Distributor has failed, it must be sent in for core exchange for a rebuild unit. Units that have been field-disassembled or have had repairs attempted may not be useful as cores. DO NOT fill the ports on the fuel distributor with solvent (aka carb cleaner) in an attempt to clean it out.
What is the fuel distributor on a DeLorean?
The Bosch Fuel Distributor P/N102807 is the primary fuel distribution device on the DeLorean engine. The Fuel Distributor meters the fuel based on engine demand (air flow), temperature, load, and emissions tuning.
Can you use carb cleaner on a fuel distributor?
DO NOT fill the ports on the fuel distributor with solvent (aka carb cleaner) in an attempt to clean it out. This will quickly dissolve the internal rubber parts, making eventual repair more difficult. 1 – One of the few maintenance procedures possible is to free the center plunger in case it is frozen in its channel.
How does the fuel distributor work on a WUR?
Many WURs have a vacuum diaphragm that provides enrichment during acceleration. Fuel distributor – Control center, contains a regulator to keep system pressure constant. The main moving part is a central pin which is controlled by the air sensor plate.
The Fuel Distributor meters the fuel based on engine demand (air flow), temperature, load, and emissions tuning. It also distributes the fuel to the 6 pressure-activated fuel injectors. Fuel flow is continuous, as opposed to being pulsed on and off as in modern Electronic systems.
If the Fuel Distributor has failed, it must be sent in for core exchange for a rebuild unit. Units that have been field-disassembled or have had repairs attempted may not be useful as cores. DO NOT fill the ports on the fuel distributor with solvent (aka carb cleaner) in an attempt to clean it out.
What are the inputs to the fuel injection system?
The inputs are: O2 Exhaust Gas Oxygen Content Sensor, ECT Engine Coolant Temperature Sensor, MAP Manifold Absolute Pressure Sensor, TPS Throttle Position Sensor, Vss Vehicle Speed Sensor (not always used), and the Knock Sensor whose signal is conditioned by the ESC Electronic Spark Control Module before reaching the ECM.