What are the dimensions of a cam operating roller follower?
No explanation is available for this question! 8) A cam operating roller follower has the following dimensions, radius of base and nose circle as 15 mm and 10 mm respectively and distance between them is 8 mm. Determine lift made by the follower No explanation is available for this question!
What are the uses of a cam follower?
The spherical outer ring easily absorbs a distortion of the shaft center when the cam follower is installed and helps lighten a biased load. The Cam Follower is used in a wide range of applications such as cam mechanisms of automatic machines, dedicated machines as well as carrier systems, conveyors, bookbinding machines, tool
Which is type of Cam does not require any external force?
6 Which type of cam does not require any external force to have contact between cam and follower? C Both a. and b. 7 A cam operating roller follower has the following dimensions, radius of base and nose circle as 15 mm and 10 mm respectively and distance between them is 8 mm. Determine lift made by the follower
What should the chamfer be on a Carter cam follower?
The face of the housing should be flat and square with the housing bore, and must have a diameter of at least that listed in the dimensional tables for proper support of the bearing endplate. In order to obtain the best support for the Carter Cam Follower Bearing, the chamfer on the housing bore should not exceed 0.5 mm x 45
What is the lift of a cam follower?
This angle is very important in designing a cam profile. If the pressure angle is too large, a reciprocating follower will jam in its bearings. 9. Define Lift (or) Stroke in cam. It is the maximum travel of the follower from its lowest position to the topmost position.
When do you call a follower an offset follower?
When the motion of the follower is along an axis away from the axis of the cam centre, it is called offset follower. 7. Define trace point in the study of cams. It is a reference point on the follower and is used to generate the pitch curve.
Which is the maximum travel of a follower in Cam?
Define Lift (or) Stroke in cam. It is the maximum travel of the follower from its lowest position to the topmost position. 10. Define undercutting in cam.
The face of the housing should be flat and square with the housing bore, and must have a diameter of at least that listed in the dimensional tables for proper support of the bearing endplate. In order to obtain the best support for the Carter Cam Follower Bearing, the chamfer on the housing bore should not exceed 0.5 mm x 45