How to take an old picture frame apart?
How to Take Apart a Picture Frame 1 Flip your frame over so it’s face-down. 2 Cut off the paper backing using a utility knife. 3 Pull out the nails or staples with pliers. 4 Lift the contents of the frame out of the frame. 5 Turn your metal frame over so it’s upside down. 6 (more items) See More….
How do you remove wire from picture frame?
Unscrew the wire from the back of the frame. Most metal picture frames are hung using a wire that runs between the left and right sides of the frame. If your frame doesn’t have a wire, you can skip this step. If it does, use a screwdriver to remove the screws that are holding the wire in place. Set the wire and screws aside.
What do you use to remove cardboard from picture frame?
Pull out the nails or staples with pliers. Now that the paper backing is off, you should see a piece of cardboard that’s held in place by small nails or staples. You need to pull them all out with the pliers so you can take the cardboard out of the frame. If you’re having trouble getting staples out with pliers, try a staple remover.
What’s the best way to disassemble a Chevy differential?
It depends on your preference and tools available. The first step is to use a socket and ratchet or a wrench to remove the cover bolts. Use a soft mallet to break the seal or use a pry bar, but be careful not to damage the mounting surface of the center section.
Do you need to take differential housing out of car?
Most applications require removing only a few extra bolts to the get the housing out of the vehicle. If you are performing a complete overhaul, taking the housing out of the chassis allows you to clean and paint the housing. However, it’s your decision whether or not to unbolt the axle from the chassis.
How can you tell if your differential is worn out?
Many signs can tell you that the differential is worn out and may be close to failing. The following is a brief list of signs and their general cause. A small pool of gear oil on the ground by the rear tires or a greasy wheel/tire is a sure sign of a bad axle seal.
How to remove pinion seal from Chevy differential?
Pinion Yoke Removal 1 Remove Pinion Nut A fair amount of torque is required for removing the pinion nut. 2 Remove Yoke A few blows with a soft hammer usually gets the yoke free from the splines. 3 Remove Pinion Seal (Special Tool)