What to do if your oil light is still lit after an oil change?
Look at the dash to see if the oil light is still flashing or lit. If so, repeat the reset process. If the light is still lit after three reset attempts, contact the manufacturer to learn the correct reset procedure for your vehicle.
How do you reset the oil light on a Ford truck?
Turn the ignition to the “on” position, but do not start the engine. For 2004-2010 Ford trucks: Press and hold the Select/Release knob on your dashboard until the display reads “OIL LIFE XXX% HOLD RESET = NEW”. Use the directional pad on the steering wheel to access the settings menu.
How do you reset the oil life of a car?
Figure 1. Press in and hold the select/reset nub on the right until you get to this screen. Figure 2. Access the settings menu using the arrows on your steering wheel. Press and hold the reset button for approximately two seconds and release to reset the oil life to 100%.
How to reset a GMC oil change light?
The following instructions cover the model year 2005, as well as older GMC products and Chevrolet vehicles without a vehicle information center (VIC). To reset the oil change light, follow these two steps: Slip behind the wheel and close all the doors. Insert the key in the ignition and turn the key to the accessory position.
How do you turn off the change oil light?
Watch for the change oil light to flash. If it does not flash and remains on, turn the ignition key to the off position and then retry the procedure. After the change oil light flashes, it should go out. If the change oil remains on for five seconds (depending on the year and model Chevy), it may not have reset.
How to turn off a “change oil” light?
– Turn the ignition key to the accessory position. – With the oil message displayed, locate the enter button on the driver information center. Press and hold the button for one second. – Start the vehicle. The oil change light will stay off until it is time to change your oil again.
How do I reset oil life light?
- Turn the ignition to the first position. Do not start the engine.
- Press the ” Trip ” stem to toggle it to show ” Engine Oil Life “.
- Press and hold the ” Trip ” stem for about 10 seconds until the display starts blinking.
- twist the ” Trip ” step to choose the ” Reset ” option.
- this time for 5 seconds.
How can I Reset my low oil light?
- Insert key into the ignition and turn the vehicle to the “ON” position. Do this without starting the vehicle.
- which means the system is resetting.
- Turn off the ignition once the light stops flashing.