How to repair Mercedes-Benz SLK 230 trunk lock?
Mercedes-Benz SLK 230 Trunk Lock Cylinder Repair | 1998-2004 | Pelican Parts DIY Maintenance Article When the key is fully inserted into the lock… compare how far in it will go in the door lock or glove box lock… it should turn, if it doesent then it is still partly seized.
Why does my Mercedes-Benz SLK 230 not start?
Here’s the size up: I am working on a 99 SLK 230. When I go to start the car it turns but doesn’t start. The k40 board was re-sodered and looks good. The only code on the OBD-II is the camshaft Position Sensor but I ‘ve had that issue for over 7,000+ miles.
How do you open the trunk of a Mercedes Benz?
You will need to slide the locking tab with your thumb and pull out the metal key. Step 2. Insert the key into the trunk lock cylinder. Step 3. Turn the key until you hear the trunk pop open. Note: Avoid jump starting your Mercedes-Benz by connecting the jumper cables directly to the battery.
Can a CLK 320 W208 boot release work?
CLK 320 w208 boot release works for a time after battery disconnected . . . Fitting a boot lock assembly on a CLK W208. Hello new to this forum, but I have a 200K W208 year 2000 owned since new.
Why is my Mercedes SLK 230 not opening the trunk?
If the key fob won’t unlock the trunk, the fob might need fresh batteries, or possibly the receiver, wiring or microswitch are faulty. Also, the pneumatic central locking system might have a glitch. If the key and lock button won’t open the trunk, the problem is likely mechanical.
How to clear the drain hoses in a Mercedes SLK boot?
Could you tell me how to clear the drain hoses in the boot of a mercedes slk Boot as they seem to be blocked and are – Answered by a verified Mercedes Mechanic We use cookies to give you the best possible experience on our website.
Why is there water in the boot of my Mercedes?
A common problem for water in the boot however is the lower roof seal that the boot presses against, below the rear screen. This can leak allowing water into the boot & should be replaced using some sealant to install the new seal. Best regards, Paul Ask Your Own Mercedes Question Customerreply replied 9 years ago
Can a trunk latch be removed from a Mercedes?
Once the latch is unbolted from the trunk, the wiring plug (blue arrow) can be uncoupled. The connecting rod slips out of the socket (red arrow). New replacement latch assemblies are available. If the mechanical mechanism works (actuated by the key in the lock cylinder), the latch’s microswitch might be bad.