What is the transmission code for a Mercedes C240?
Took it to a transmission specialist and he got the following codes: P2400 The right rear wheel rpm signal sent from the traction system via the CAN bus is implausible. P240C The CAN signal for the selector lever position from component N15/5 (electronic selector lever module control module) is implausible.
What to do if you have a Mercedes transmission problem?
An advanced diagnostic scanner such as the iCarsoft or the Launch Creader listed here are a must for do-it-yourself Mercedes-Benz repair. They are affordable and can access most of the systems on your Mercedes-Benz including Airbag, EPS, ETS, Transmission, Engine, front and rear SAM, SRS, brakes and a lot more. 3.
What was the problem with my 2002 C240?
My 2002 c240 problem started with the transmission jumping into gear when i go into drive, when i slow down to stop at a light it down shift and this process continue everytime i begin to drive or stop. I took it to a Mercedes Benz dealer in my state.
What do you need to know about a Mercedes Benz?
Location of power steering fluid, coolant, brake fluid and windshield washer. Here are ten things that all Mercedes-Benz owners should know to keep their cars running longer, avoid headaches and save money. 1. Know what oil and filter to use. Mercedes-Benz recommended oil interval is 10,000 miles.
What kind of engine does Mercedes Benz W123 240 D have?
With 0 to 100 km/h (62mph) in 22.0 seconds, a maximum top speed of 89 mph (143 km/h), a curb weight of 3053 lbs (1385 kgs), the W123 240 D has a naturally-aspirated – 4 cylinder engine, Diesel motor. This engine produces a maximum power of 72 PS (71 bhp – 53 kW) at 4400 rpm and a maximum torque of 137 Nm (101 lb.ft)…
What’s the top speed of a Mercedes Benz 240 D?
With 0 to 100 km/h (62mph) in 22.0 seconds, a maximum top speed of 89 mph (143 km/h), a curb weight of 3053 lbs (1385 kgs), the W123 240 D has a naturally-aspirated – 4 cylinder engine, Diesel motor. This engine produces a maximum power of 72 PS (71 bhp – 53 kW) at 4400 rpm and a maximum torque of 137 Nm (101 lb.ft) at 2400 rpm.
Took it to a transmission specialist and he got the following codes: P2400 The right rear wheel rpm signal sent from the traction system via the CAN bus is implausible. P240C The CAN signal for the selector lever position from component N15/5 (electronic selector lever module control module) is implausible.
What is the fault code for Mercedes C class?
Common fault codes: P1856 – Selector Lever Position Detection Failed; P240C – CAN Signal Selector Lever Position N15/5 Is Not Plausible Affected Vehicles: Mercedes A-Class 2004 – 2012 (W169) Mercedes C-Class 2005 – 2009 (W203 and pre-facelift W204) Mercedes CLK 2005 – 2009 (C209/A209) Mercedes CLS 2005 – 2009 (W219)
My 2002 c240 problem started with the transmission jumping into gear when i go into drive, when i slow down to stop at a light it down shift and this process continue everytime i begin to drive or stop. I took it to a Mercedes Benz dealer in my state.
What are all the codes on a Mercedes Benz?
Use an advanced OBD-II code reader to read and erase Engine CEL, Transmission, ETS, ABS, Airbag and other systems. There are also codes for other control units such as transmission, ABS, SRS, ESP, 4ETS, airbag, A/C. Mercedes-Benz can have up to 47 control units. You can NOT diagnose them with a simple OBD-2 scanner.
Common fault codes: P1856 – Selector Lever Position Detection Failed; P240C – CAN Signal Selector Lever Position N15/5 Is Not Plausible Affected Vehicles: Mercedes A-Class 2004 – 2012 (W169) Mercedes C-Class 2005 – 2009 (W203 and pre-facelift W204) Mercedes CLK 2005 – 2009 (C209/A209) Mercedes CLS 2005 – 2009 (W219)
Use an advanced OBD-II code reader to read and erase Engine CEL, Transmission, ETS, ABS, Airbag and other systems. There are also codes for other control units such as transmission, ABS, SRS, ESP, 4ETS, airbag, A/C. Mercedes-Benz can have up to 47 control units. You can NOT diagnose them with a simple OBD-2 scanner.
What does it mean when your transmission is not working?
Your automatic transmission uses input and output speed sensors to determine whether your transmission is in the gear that the transmission control module (TCM) wants it to be in. If you see this code, it means that the TCM isn’t correctly calculating the shift pattern.
Where can I find the transmission range code?
With most vehicles, the TCM is the only computer that can turn on the check engine light. If there’s a problem preventing the light from coming on, you’ll see this code. The transmission range sensor tells the TCM the position of the gear lever.