Why are the lights not working on my Mercedes?
Lights not working – We have seen many Mercedes-Benz where one or a few lights don’t work. It can be that the left or right low beams, fog lights or turn signals may not work. You should always avoid splicing wires to get power for aftermarket HID lights, alarm or connecting a trailer hitch.
What’s the problem with the fuel light blinking?
Hello, I have a same problem on my 2002 Ml500, the fuel light starts blinking but I definately have a full tank and I chagned the fuel cap. Everytime I turned on the engine and run for 10 to 15 miles, then fuel light starts Blinking. I turned the enginee off the fuel Blinking gone. Anyone have thoughts on this? Thanks.
Why is my turn signal not working on my Mercedes CLK?
Blown turn signal fuse or turn signal fuse keep on blowing. Short in the wires that provide 12 volts to the turn signal. You will need to locate the short and repair it. Check the wiring inside the headlight or tail light as the insulation of the wires may melt over time causing a short. We have seen this happen on several E and CLK class models.
Where is the turn signal on a Mercedes?
The turn signal switch is part of the combination switch found in the steering column and is mounted right behind the steering wheel. You may also notice that the wiper switch is not working either.
Lights not working – We have seen many Mercedes-Benz where one or a few lights don’t work. It can be that the left or right low beams, fog lights or turn signals may not work. You should always avoid splicing wires to get power for aftermarket HID lights, alarm or connecting a trailer hitch.
Blown turn signal fuse or turn signal fuse keep on blowing. Short in the wires that provide 12 volts to the turn signal. You will need to locate the short and repair it. Check the wiring inside the headlight or tail light as the insulation of the wires may melt over time causing a short. We have seen this happen on several E and CLK class models.
The turn signal switch is part of the combination switch found in the steering column and is mounted right behind the steering wheel. You may also notice that the wiper switch is not working either.
What kind of car is the c 300 4Matic?
Responsive, refined and ready for what’s next, the C 300 4MATIC is an innovative, elegant and powerful way to travel in style.
What causes a Mercedes signal acquisition module to fail?
Typically this is caused because repair is performed in near the SAM control unit. If the SAM modules are not closed and sealed, properly they will eventually corrode. If a SAM module fails due to corrosion, at first you may notice that electrical problems are intermittent. Excessive current draw – SAM control units don’t fail often.
What kind of mirrors do Mercedes Benz use?
SLK 320 SLK 350 AMG C 63 AMG C 63 AMG S CLA 45 AMG E 55 AMG E 63 AMG E 63 AMG S G 63 AMG GLC 43 AMG
What kind of radio does Mercedes Benz 300CE use?
Updates to make the car a better fit in today’s world are the following: I replaced the original Becker radio with a Blaupunkt unit that includes Bluetooth and USB music input.
Is the Mercedes Benz 300CE a Sportline car?
They are outfitted with the larger wheels, faster steering rack, bigger stabilizer bars and lowered suspension). With a Sportline car, you are basically going to get the car fully optioned. This car is only missing the rear window electric shade (which I have since then purchased, but not installed.
What kind of engine does a Mercedes 300CE have?
1990 w highly desirable 3.0 dohc motor w updated interior. 59k on the odometer but it sticks so sold as true mileage unknown but I would guess around 140K. All 4 windows work plus sunroof tilts and slides back properly. good tires w recent new radiator w thermostat plus the dreaded thermo plug hose buried in the cylinder head was just changed.
Is the Mercedes Benz 300CE made in Beverly Hills?
Mercedes-Benz will always make parts to keep this beauty running for generations to come. Please feel free to contact us with any questions or concerns one might have. You are looking at a rare USA Amg wide body that is said to be 1 of 27 built by Beverly Hills Mercedes Dealership. The car is in very nice shape.
What are the different types of Mercedes Benz warning lights?
Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 40 of them so be patient! Models examined include AMG, B, C, CLA, CLS, E, G, GL, GLA, GLC, GLE, GLK, GLS, GT, M, S, SL, SLC and SLS Class and Series vehicles.
Why is my Mercedes-Benz transmission not shifting?
If cracks develop between the two chambers, coolant will mix with transmission oil and it will destroy the transmission. This has been a well-documented issue for Mercedes-Benz cars equipped with the Valeo radiators.
What to do when your Mercedes goes into limp mode?
You may also get a check engine light if your transmission goes into limp mode. When a Mercedes-Benz goes into limp mode, it only operates in second gear and reverse only. When you put it in gear, you may also feel a bang as transmission engages. The first thing you should try is to check the transmission fluid level.
What are the warning lights on a Mercedes Benz?
The following are warning lights and indicators found in vehicles built by Mercedes Benz. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 40 of them so be patient!
What causes the door ajar warning light to stay on?
However, a fault in either the electrical or mechanical components can cause the door ajar warning light to remain on when the doors are closed, and possibly cause the interior lights to remain on. Can I drive with the door ajar warning light on?
What does the warning light on my car mean?
When the system is working properly, the light lets you know that one or more of your doors is either open or not closed securely. On some vehicles, the trunk lid, rear hatch and even the hood can be part of the system. But the warning light system can sometimes malfunction.
How does a car door sensor tell if the door is open or closed?
Each door in your car is equipped with a sensor that can tell whether that door is open or securely closed. The sensor typically uses a switch with a spring-loaded plunger that is compressed when the door is closed, and is released when the door is open.
Where is the turn signal light on a Mercedes?
“Turn Signal Left / Right / Front / Rear / Side Malfunction” warning may appear on electronic instrument cluster on newer Mercedes models. Double check the turn signal light bulb of your Mercedes car. Make certain it is placed properly in the turn signal socket.
Where are the tail lights on a Mercedes Benz?
Normally the Mercedes tail lights are controlled by the rear Signal Acquisition Module (SAM) module. The SAM can be found at the lefts-side of the trunk and are generally available in aftermarket stores. Hence a diagnostic scanner may be required to check the codes in the system.
What happens when a Mercedes Benz goes into limp mode?
When a Mercedes-Benz goes into limp mode, it only operates in second gear and reverse only. When you put it in gear, you may also feel a bang as transmission engages. The first thing you should try is to check the transmission fluid level. The transmission has a dipstick tube but with no dipstick in it.
What causes DPF warning light on Mercedes a class?
This will not store any personal information) The DPF (Diesel Particulate Filter) can get clogged up on this car if you are only using it for short journeys, e.g. around town. This will result in the DPF warning light appearing on the dashboard.
Typically this is caused because repair is performed in near the SAM control unit. If the SAM modules are not closed and sealed, properly they will eventually corrode. If a SAM module fails due to corrosion, at first you may notice that electrical problems are intermittent. Excessive current draw – SAM control units don’t fail often.
How to troubleshoot Mercedes Benz air suspension problems?
Learn how to troubleshoot Mercedes-Benz Air Suspension Problems. You decide to buy a Mercedes-Benz, maybe an S-Class, CLS-Class, R-Class, CL-Class or E-Class. One day you hear of other Mercedes-Benz owners having suspension problems. The next day you start having air suspension problems yourself.
What does it mean if your Mercedes Sam is not working?
You should eliminate any other possible issues and even get a second opinion before you replace the SAM unit. If you get an error message that no communication with the SAM module exists, it means that the SAM is defective or it is not getting power. Used Mercedes SAM units are affordable and one option if you have an older MB.
Where is the air compressor fuse located on a Mercedes Benz?
For example on the Mercedes-Benz S-Class W220, there is a air compressor relay and fuse 32 on the fuse box located on the passenger side of the engine compartment. Here is a picture that shows where they are located.
What causes a Mercedes Benz to not start?
In most cases you will get a fault code related to one of the following: 1 ECM / PCM computer failure 2 Camshaft position sensor 3 Shifter Selector module 4 Fault codes related to driver authorization or immobilizer 5 Electrical problems
Why is the battery on my Mercedes Benz not working?
Hint: Starter Problem or Low Battery This may seem obvious, but an old battery is the root of many headaches and can cause all sorts of malfunctions on Mercedes-Benz cars. How old is the battery on your Mercedes-Benz?
Why is my electric seat not working in my Mercedes?
If its is CLK320 2002, then is it the fuse no 6. white 25 fuse. Otherwise please check the list in the fuse box, it will tell you which one is for seat adjustment. yep my passenger seat has the same problem. i can still hear a clicking sound when i press the backward and forward button though…. like its stuck…
Why is my turn signal light not working?
To identify the compatible part numbers, call your Mercedes Benz service Laguna Niguel dealer parts department and provide them the VIN of your Mercedes-Benz. A burned light bulb, bad SAM module, bad headlight, connector, taillight electrical plug or harness and burned turn signal contact may cause Mercedes turn signal not to work. What to do?
What does it mean when your turn signal is not working on Mercedes?
In newer Mercedes models, you will get a warning on instrument cluster stating “Turn Signal Left / Right / Front / Rear / Side Malfunction”. Depending on the Mercedes model and problem a warning may or may not show on the dashboard.
What should I do if my turn signal light is not working?
LED lights rarely fail. The first test that you should perform is to disconnect the LED turn signal light and apply power to the LED bulb. Does the LED light turn on? If the LED doesn’t turn on, replace it. If the LED turn signal light does turn on, the LED light is not the problem.
Why are the flashers on my Mercedes not working?
I had the same problem with the flashers intermittently not working. I eventually traced it to a dry (i.e. bad) solder joint on one of the legs of the fuse holder for the flasher circuit. This is in the light switch/fuse module in the console next to the steering wheel (accessible when you open the driver’s door).
Where is the light switch on a Mercedes Benz?
This is in the light switch/fuse module in the console next to the steering wheel (accessible when you open the driver’s door). I found it by trial and error after removing the cover underneath the steering wheel and noticing that the movement made the problem come and go.
How can I tell if my Mercedes Sam is defective?
Next to confirm that the SAM unit is defective you should read the fault codes. For this you will need to see a mechanic that has Mercedes Star Diagnostic or use a scanner such as iCarsoft MB II. The fault codes will have enough information to tell you if this is a SAM module problem or not.
What should I do if my Mercedes FOB is not working?
If you need a replacement battery note that Mercedes-Benz uses CR2025 battery type. Ensure you have new batteries in your key fob. Next, look carefully at your Mercedes-Benz key. When you press the button on your key you should see a small RED led light.
How can I tell if my Mercedes remote is working?
Next, we need to check if the remote is sending out a message. The remote emits infrared waves. While you can’t see infrared light with your eyes, there is an easy way to check. Grab your phone and turn on the camera. Point the camera to your phone and carefully see if you notice a light every time you turn you press a button on the remote.
If you need a replacement battery note that Mercedes-Benz uses CR2025 battery type. Ensure you have new batteries in your key fob. Next, look carefully at your Mercedes-Benz key. When you press the button on your key you should see a small RED led light.
Next, we need to check if the remote is sending out a message. The remote emits infrared waves. While you can’t see infrared light with your eyes, there is an easy way to check. Grab your phone and turn on the camera. Point the camera to your phone and carefully see if you notice a light every time you turn you press a button on the remote.
What kind of battery does a Mercedes Benz FOB use?
If you need a replacement battery note that Mercedes-Benz uses CR2025 battery type. Ensure you have new batteries in your key fob. Next, look carefully at your Mercedes-Benz key.
Why is the speedometer on my Mercedes not working?
An instrument cluster ain’t cheap!! Upon checking further—-all four speed sensors would have to fail for the speedo IC computer to read “0”. Additionally the traction control modules are the modules that provide the rpm data for the IC via the CAN. Therefore it could mean that the data is not getting to the IC.
What does the rear brake sensor do on a Mercedes?
It communicates with the overhead control panel. It controls rear lights, closing the trunk and fasten seat belts indications; fuel tank level sending unit, a tilt sensor Anti-Theft Alarm inclination sensor, door contact switches, and the rear brakes wear sensor. (Source: W220.ee)
Where is the brake light switch on a Mercedes W210?
In the older W210 E-Class, it is located in the back on the back of the pedal. You may need to lay on your back to access the switch. To remove the switch, press on the locking tab and then rotate it clockwise. Step 4. Install new switch Once you remove the old brake light switch, unplug the electrical wires from it.
What to do if your brake light switch is not working?
Try turning off the engine and remove the key, wait a few seconds and restart the car. That may solve the problem temporarily. Even though the problem could be multiple things, the brake stop light switch is the first thing you should inspect. Which Mercedes-Benz models are impacted by the defective brake light switch?
Is the tail lamp out on a 2004 C320?
2004 C320 displays tail lamp out as well as backup light on left side. However, tail light works fine. Anyone have an idea? Thanks! Click to expand… I had this same issue a while back, did you try to remove the six pin connector and replugging it in snug? (before doing this turn your external light control knob from auto to 0).
What happens when your tail lights are not working?
When the tail lights fail or do not function properly the car becomes a danger or hazard to self and others on the road. You may receive a ticket or citation from the traffic police. Blow fuse – The first thing the mechanics check is the fuse corresponding to the rear lights.
How can I tell if my tail lights have a fuse?
When you have located the fuse for the tail lights use a fuse tester to check the connection. If the tester lights up – your fuse is functioning fine. If it does not light up then, replace the fuse with another of the similar amperage and size. In many instances, you can see the break in the metal strip of the fuse.
What does the ABS warning light on a Mercedes mean?
If the ABS warning light is also illuminated this signals that the braking system has malfunctioned and your brakes may not work properly. In this case the Electronic Brake Force Distribution (EBD) warning light may also be illuminated. Can I still drive with my parking brake and brake fluid light on?
What’s the name of the Mercedes Benz parking light?
Parking light. P21/5W. Front turn signal. P21/5W. Rear turn signal. P21W. Tail light. 5007 or 12821 or R5W. Tail light.
How to replace a light bulb in a Mercedes Benz?
Light bulb replacement guide for Mercedes-Benz cars. Look up your Model on the first column then move over to the right and click on the year or chassis type. If there is something we don’t have on this page check out Philips website here.
Why are my low beams not working on my Mercedes?
When it burns out it will stop suppling power to whatever lights it wants to. Multimeter the socket, no power replace the relay/check fuses of course. Suggest junk yard new they are about 200. The headlights on my 88 260E would turn OFF when I switched from high beams to low beams. Very unsettling the first time it happened.
What to do if your low beam light does not work?
Remove the covers surrounding the steering column and access the electrical connector to the combo. switch. With the switch in the Low Beam mode, test wires #2 BLUE and #3 ORANGE, with a test light or DVOM, for 12v. If there is not 12v, replace the Combination Switch. If there is 12v, replace the covers on the steering column and post back.
Why does my 2000 ML320 headlights not work?
As an afterthought, your car probably has the auto on headlights function whereas the 2000 ML320 in the wiring diagram did not. The diagram should still be close to the mark.
Why is my Mercedes Benz battery not working?
If you pressed the unlock button on the door handle the instrument cluster would state “Key not recognized”. The next problem that this car developed was the battery dying when the car was parked for an extended period of time or parked overnight. It was confirmed that no lights were left on.
Why does my Mercedes not turn off when I Turn Off the key?
The system would start to beep as if you were approaching an object yet there was nothing near the car. Last but not least, the issue with this Mercedes was the engine not turning off when the key was removed from the ignition. While the instrument cluster lights would turn off once you removed the key, the engine would still run.
How to discuss a Mercedes Benz door lock problem?
Start a new thread on your specific issue. Also try using the ‘search community’ at the top of your webpage for other threads on the w202 forum and even the w210 forum. ===>>> Update your user CP info…. Did you find the recommended reading relevant to this discussion?
What does it mean when your door lights don’t turn off?
Video just showing how to replace a door jamb sensor most of the time when you close your door and the door lights dont turn off it means your door jam sensor is either loose or is defective and needs replaceing real easy part to replace. LINK TO BUY DOOR JAMB SENSOR- https://rover.ebay.com/rover/1/711-53…
What does the fob remote on a Mercedes Benz do?
The newer keys have a transponder integrated in them. The key fob remote serves two purposes. First it disables the anti-theft system when you unlock the car. Second, Drive Authorization System verifies the key to make sure it is the right key to start the car.