How to change engine oil and filter in a Mercedes Benz?

How to change engine oil and filter in a Mercedes Benz?

Fill the engine slowly with new oil and plan to pour in 5-6 quarts at first. Run the engine then for a minute or two to allow oil to circulate and fill the filter housing. Then let it sit for a few minutes, check the level, and add more oil as needed until you reach the full mark on the dipstick.

How to change the oil in a Mercedes Benz W123?

Move to the top of the motor and remove the oil filler cap from the valve cover (red arrow). Begin by installing 7 liters of your oil for the turbo diesel and 6 for the non turbo, then start the motor and let it run for a few minutes. Stop the motor and give it a few minutes for the oil to works its way down into the pan.

What kind of oil does a Mercedes Benz use?

Two 5L bottles of oil 15W-40 Diesel Motor Oil (5 Liters) – Liqui Moly LM2044 (you will use about 7.5 quarts leaving a bit left over for top-offs down the road) Or just buy the Mercedes Diesel Oil Change kit – one handy item that covers all of your needs!

Can a diesel engine be overfilled with oil?

Never overfill a diesel engine with oil! Doing so can lead to a runaway diesel – a topic for another day, but something you want to avoid at all costs. Now that your engine has a fresh filter and new oil, get out there and enjoy the drive! But make note of the mileage when you performed the change.

How do you change the filter on a Mercedes?

The filter change process is the same, regardless of the oil change method used. To start, remove the oil cap. This will allow the oil to drain out of the engine faster. Now underneath the car loosen the oil drain bolt. It takes a 13mm socket. Be aware that once the bolt comes loose the oil will come out very quickly.

How do you change engine oil in a Mercedes?

Use a pair of needle nose pliers to remove the old one. Then apply a small amount of fresh engine oil on to the new o-ring to help it seal before setting it in the channel on the underside of the lid. Then install the new filter on the shaft of the cover, with the paper part facing down, away from the lid.

Two 5L bottles of oil 15W-40 Diesel Motor Oil (5 Liters) – Liqui Moly LM2044 (you will use about 7.5 quarts leaving a bit left over for top-offs down the road) Or just buy the Mercedes Diesel Oil Change kit – one handy item that covers all of your needs!

What should I use to change my oil filter?

The new oil filter kit should come with the filter itself, a choice of new crush washers for the drain plug bolt, and a new large o-ring gasket for the oil filter housing cover. It’s generally recommended to use the copper crush washer. Copper is a soft metal that crushes well for a good seal.