Is the distributor on a Mercedes Benz W126 needed?
The distributor on the W126, like any distributor on any car, plays an important role in the smooth and efficient running of the engine, and while the distributor itself should last the life of the car, there are several components on or in it that wear out, need servicing or replacement over time. The first of these is the distributor cap.
How big is a Mercedes Benz distributor screw?
07-11-9-906-128-BOE Appears to be a 4.8mm x 13mm self-tapping screw with a hex head about 8mm across so probably is the one most people are used to. I haven’t measured mine as I seem to always lose one into the engine bay everytime I take the housing cover off.
How to remove distributor cap on Mercedes W126?
To remove the cap, remove the two bolts (red arrows) holding the distributor cap to the distributor. Use a large flat head screwdriver, push the screw down and give it a half turn, it will pop up when released. You can now remove the cap and wires as one piece.
What is the top speed of a W126 420 SEL?
With a fuel consumption of 11.6 litres/100km – 24 mpg UK – 20 mpg US (Average), 0 to 100 km/h (62mph) in 8.3 seconds, a maximum top speed of 135 mph (218 km/h), a curb weight of 3594 lbs (1630 kgs), the W126 420 SEL has a naturally-aspirated V 8 cylinder engine, Petrol motor, with the engine code 116.964/965. This…
When did the Mercedes Benz W126 420 SE come out?
The W126 model is a car manufactured by Mercedes Benz, with 4 doors and 5 seats, sold new from year 1987 to 1991, and available after that as a used car. Towing Capacity Max. : How much horsepower does a 1987 Mercedes Benz W126 420 SE have? The 1987 Mercedes Benz W126 420 SE has 224 PS / 221 bhp / 165 kW horsepower.
What are the specs of a Mercedes Benz W126?
Mercedes Benz W126 420 SEL Specs. With a fuel consumption of 11.6 litres/100km – 24 mpg UK – 20 mpg US (Average), 0 to 100 km/h (62mph) in 8.3 seconds, a maximum top speed of 135 mph (218 km/h), a curb weight of 3594 lbs (1630 kgs), the W126 420 SEL has a naturally-aspirated V 8 cylinder engine, Petrol motor, with the engine code 116.964/965.
What kind of pump does a Mercedes Benz W126 use?
All gasoline W126s came with some form of K-Jetronic CIS-E electro-mechanical fuel injection. Fuel distributors and pumps can see aged seals, which could lead to fuel leaks under the hood and underneath the tank. Rebuild kits are readily available and a Bosch pump costs about the same as a W116 gas model, at around $150 to $200.
Can you replace the distributor on a Mercedes Benz?
You can now replace the seal on the shaft of the distributor. With the distributor out of the engine you can use a 6mm wrench and remove and replace the condenser wire that sends a signal to the CDI unit.
The distributor on the W126, like any distributor on any car, plays an important role in the smooth and efficient running of the engine, and while the distributor itself should last the life of the car, there are several components on or in it that wear out, need servicing or replacement over time. The first of these is the distributor cap.
You can now replace the seal on the shaft of the distributor. With the distributor out of the engine you can use a 6mm wrench and remove and replace the condenser wire that sends a signal to the CDI unit.
07-11-9-906-128-BOE Appears to be a 4.8mm x 13mm self-tapping screw with a hex head about 8mm across so probably is the one most people are used to. I haven’t measured mine as I seem to always lose one into the engine bay everytime I take the housing cover off.
To remove the cap, remove the two bolts (red arrows) holding the distributor cap to the distributor. Use a large flat head screwdriver, push the screw down and give it a half turn, it will pop up when released. You can now remove the cap and wires as one piece.