How do I reset service B on my Mercedes C230?
Use the DOWN arrow again to highlight CONFIRM and then press the OK button. The display will then show “Full service completed”. Press the BACK button repeatedly to get back to the standard display. Turn the vehicle to the OFF position and back ON to confirm the reset is complete.
How do you reset the service indicator on a Mercedes?
Press the scroll forward button until “Conf. Full Serv.” is highlighted. Confirm the selection, and reset the service indicator by pressing the “OK” button. Once the service indicator is reset, place the ignition back to position “0.” Figure 6.
How to reset service Minder light on Mercedes Benz C class?
The service interval must be reset after performed the maintenance service on your vehicle. Follow the instructions below to reset the Service Minder light on your Mercedes-Benz C-Class: If your vehicle has an ignition button, press the START-STOP ENGINE button twice without touching the brake pedal.
How do I Reset my Mercedes Sprinter service reminder?
Press the 0 reset button on the side of the instrument cluster and hold until you hear a beep. Once you hear the beep go back to the steering wheel and press the menu button. Press the up arrow and you should see “Confirm Complete Service”.
When to reset service due light on Mercedes Benz C250?
Service due require light on Mercedes Benz C250 serves as an indicator which shows up on your cluster board. It helps track when your next oil change is due. Oil light reset on Mercedes Benz 250 should be carried out after a successful oil change. Below is a step by step guide on how to reset service due light on Mercedes Benz C250.
How to reset Mercedes class service without using a scan tool?
Mercedes S Class Service A Reset Procedure Without Using a Scan Tool! Press HOUSE button located on the left of the steering wheel repeatedly until the menu item TRIP is highlighted in the multi-function display Press and hold PHONE button and then within 1 second press and hold down the OK button
How to reset ” service B ” on Mercedes C230?
1 Close all doors, hood, and trunk lid and turn the ignition to position II (ON) 2 Press the main menu PAGE buttons repeatedly to display the main trip/temp menu 3 Press the UP and/or DOWN arrows to scroll through the sub-menus to display the FSS (Flexible Service System) menu
How to reset Mercedes E class service light at home?
To enter reset mode, press and hold the TRIP or DIMMER button (located on the left side of the instrument cluster) until the message “Do You Want To Reset Service Interval?” “Confirm reset Using Reset Button” or “Service Interval To Reset: Press Reset Button for 3 Sec.” is shown in the display, then release the button
What should the coolant level be on a C230?
2003 Mercedes-Benz C230 Kompressor 1.8L 4 Cyl. Supercharged Coupe (2 Door) Top up power steering fluid Help keep your car as responsive as you are by maintaining proper power steering fluid levels 2003 Mercedes-Benz C230 Kompressor 1.8L 4 Cyl.
How often should I replace the battery in my Mercedes C230?
Supercharged Sedan (4 Door) Replace the battery in your 2005 Mercedes-Benz C230 Kompressor 1.8L 4 Cyl. Supercharged Sedan (4 Door) once every 4 years for optimal performance. Watch this free video to see how to replace a dead battery in your 2005 Mercedes-Benz C230 Kompressor 1.8L 4 Cyl.
How to reset Mercedes Benz B class service a B?
Press and hold PHONE button and then within 1 second press and hold down the OK button Hold both buttons for 5 seconds or until you see “Vehicle data Dynamometer Test Change Brake Lining ASSYST PLUS and Head-up Display” on the screen Press the DOWN arrow repeatedly until ASSYST PLUS is highlighted and then press the OK button
Use the DOWN arrow again to highlight CONFIRM and then press the OK button. The display will then show “Full service completed”. Press the BACK button repeatedly to get back to the standard display. Turn the vehicle to the OFF position and back ON to confirm the reset is complete.
Can you reset a Mercedes after an oil change?
These are the manual reset procedures to clear the maintenance message after an oil change without the use of the Mercedes scan tool. That means that you can do this from home. Whether you perform your own service or the service shop just plain forgot to reset it for you, there is no need to go back if you can follow these steps.
How do I reset the service light on my Mercedes?
To enter reset mode, press and hold the TRIP or DIMMER button (located on the left side of the instrument cluster) until the message “Do You Want To Reset Service Interval?” “Confirm reset Using Reset Button” or “Service Interval To Reset: Press Reset Button for 3 Sec.” is shown in the display, then release the button.
Press and hold PHONE button and then within 1 second press and hold down the OK button Hold both buttons for 5 seconds or until you see “Vehicle data Dynamometer Test Change Brake Lining ASSYST PLUS and Head-up Display” on the screen Press the DOWN arrow repeatedly until ASSYST PLUS is highlighted and then press the OK button
These are the manual reset procedures to clear the maintenance message after an oil change without the use of the Mercedes scan tool. That means that you can do this from home. Whether you perform your own service or the service shop just plain forgot to reset it for you, there is no need to go back if you can follow these steps.
To enter reset mode, press and hold the TRIP or DIMMER button (located on the left side of the instrument cluster) until the message “Do You Want To Reset Service Interval?” “Confirm reset Using Reset Button” or “Service Interval To Reset: Press Reset Button for 3 Sec.” is shown in the display, then release the button.
How to reset service light indicator Mercedes E320?
To call up the trip odometer and main odometer, press either of lower two buttons on left hand side of steering wheel (system select looks like file folder) until the display appears. Press either of the top buttons on steering wheel (arrows) until the FSS indicator appears. Press R button on the instrument cluster for 2, 4 seconds.
How to reset service intervals on Mercedes Benz?
Instructions on how to do that on several different models are shown below. The second method is to use a OBD II scanner such as the iCarsoft MB II which allows you to reset the service intervals on most Mercedes-Benz models. The Service A maintenance appointment will include the following tasks:
To call up the trip odometer and main odometer, press either of lower two buttons on left hand side of steering wheel (system select looks like file folder) until the display appears. Press either of the top buttons on steering wheel (arrows) until the FSS indicator appears. Press R button on the instrument cluster for 2, 4 seconds.
Instructions on how to do that on several different models are shown below. The second method is to use a OBD II scanner such as the iCarsoft MB II which allows you to reset the service intervals on most Mercedes-Benz models. The Service A maintenance appointment will include the following tasks:
How to reset Mercedes-Benz C Class W204 service indicator?
Press the down arrow until you are highlighted on “Full Service”, then press “OK”. Press the down arrow until you are highlighted on “Conf. Full Service”, then press “OK”. Press the down arrow until you are highlighted on “Yes”, then press “OK”. Press the down arrow until you are highlighted on “Confirm”, then press “OK”. Loading…
How to reset service light on Mercedes-Benz C class?
The navigation buttons are located on your steering wheel. Using the left arrow button, cycle through until you highlight the “Trip” option. Press and hold the call icon button. Then, within 1 second, press and hold the “OK” button for five seconds. The shop menu will automatically display. Figure 2. Scroll down until “Trip” displays.
When to reset service indicator on Mercedes W203?
We made this video to show you how to reset the service indicator on a Mercedes W203 which is the C -CLASS from 2001 to 2007. 2001 2002 2003 the clusters are a little different but the procedure is practically the same. If you have a message that says SERVICE A EXCEEDED BY — DAYS then this will reset it for you after an oil change.