How to reset adaptive shifting points on Mercedes Benz?

This procedure will reset the adaptive shifting points in your Mercedes-Benz automatic Transmission Control Unit (TCU). These simple do it yourself instructions take less than 5 minutes. No tools are required to perform this procedure and make your Mercedes-Benz shift like new. Try this if your car has been shifting sluggish recently.

Why is my Mercedes-Benz transmission not shifting?

If cracks develop between the two chambers, coolant will mix with transmission oil and it will destroy the transmission. This has been a well-documented issue for Mercedes-Benz cars equipped with the Valeo radiators.

How long does it take to shift a Mercedes Benz?

These simple do it yourself instructions take less than 5 minutes. No tools are required to perform this procedure and make your Mercedes-Benz shift like new. Try this if your car has been shifting sluggish recently. This will make your car fun to drive again, it’s like getting a free tune-up.

Can you reset the transmission on a Mercedes Benz?

This will make your car fun to drive again, it’s like getting a free tune-up. This procedure applies to all Mercedes-Benz that come with the 5-speed 722.6 and 7 -speed 722.9. This is about 95% of Mercedes-Benz cars on the road today with the exception of models made before 1995. This reset procedure works on automatic transmission only.

How much does it cost to repair a Mercedes-Benz C230?

This is a MAJOR DEFECT that MB declines to recall. Essentially the gear wears out prematurely, and if not replaced, the engine will eventually fail. The repair cost is $5-6,000. As a consumer, this is unacceptable. Shame on Mercedes-Benz.

What happens when a Mercedes Benz goes into limp mode?

When a Mercedes-Benz goes into limp mode, it only operates in second gear and reverse only. When you put it in gear, you may also feel a bang as transmission engages. The first thing you should try is to check the transmission fluid level. The transmission has a dipstick tube but with no dipstick in it.

Where are the timing marks on a Mercedes cla250?

Another thing, the video shows that that arrow is up (12 o’clock) for the intake cam, but it is down (6 o’clock) for the exhaust cam. This situation puts the lobes of the intake cam at 10 O’clock and the exhaust lobe at 3 o’clock. I am not sure if this make sense? all these setting are at TDC. I would appreciate if you have an explanation.

What should I do if my Mercedes Benz won’t start?

Start the car and you should be able to get around 60 psi. When the engine is running and when you turn off the engine the pressure should stay steady. Always perform this test on a cold engine. Next, make sure that the fuel injector connections are secure and not loose. Check the fuel pump and the fuel pump relay.

How to replace timing chain on Mercedes C320 CDI 4Matic?

Timing chain link installer die kit 1 – No.602589026300. Timing chain link installer die kit 2 – No.602589036300. Timing chain link installer die kit 3 – No.112589096300. Tool case – No.602589009800.

When do I need to replace my timing chain?

Hearing a harsh noise on startup, worn or discolored chain guides, squealing tensioners and a rough-running engine are all signs of needing a timing chain replacement. All the symptoms listed above point to a worn timing chain. Our technicians will recognize faulty sounds, oil contamination and others right away.

How to replace timing chain on BMW 320d E46?

Disconnect battery earth lead. Remove glow plugs to ease turning engine. Turn engine in normal direction of rotation (unless otherwise stated). Observe tightening torques. Do NOT turn crankshaft via camshaft or other sprockets. Do NOT turn crankshaft or camshaft with timing chain removed. Valve timing procedures

Can a Mazda 5f31j fail to engage reverse gear?

There will be a P0708 code stored in the memory. Replacing the switch solves the issues. Loose connector on the neutral safety switch or damaged wiring. Performing a visual check will reveal potential issues. Mazda MPV models that use a 5F31J 5-speed transverse automatic transmission can fail to engage reverse gear.

How to reset transmission adaptive shifting in Mercedes Benz?

If you race your Mercedes-Benz, it will remember that and keep the gearbox in gear longer. If you drive it gently, it will adapt to that as well and change gears earlier. Turn the key to position 2. You should see all the dash lights come on. Do NOT start the car.

What is the problem with the Mercedes C280?

Just like the image on your computer screen, the C280’s interior is completely two dimensional. The main problem: most of the buttons bunk together in the black plastic condominium complex in the middle of the dash. It’s a shame that the slab of plastic is so huge, because many units remain un-rented.

What happens when you reset the transmission shift points?

It is not going to make your shifting abnormal. If your gear shifts are abnormal you have something else going on. Resetting the transmission shift points makes the transmission the same as when the car is out of the factory. Within 30 driving cycles, the ECU will monitor your driving habits and adapt the shifting points to your driving style.

Are there any problems with the Mercedes engine?

Theses engines were more powerful and more fuel efficient. They did have a few teething problems but have proven to be very durable as long as they are treated and maintained properly. A true challenge – but you can do it with the right knowledge.

What causes a Mercedes Benz transmission to miss a shift?

It is monitored by the transmission control module, reporting the current gear, gear change requests and park or neutral. Due to location and frequency of use, this selector module fails over time. When it fails it can cause the transmission to miss shifts, remain in neutral or prevent the vehicle from starting (when park or neutral isn’t seen).

What is the shift selector module on a Mercedes Benz?

The shift selector module is an electronic shift or transmission range switch. It is monitored by the transmission control module, reporting the current gear, gear change requests and park or neutral.

What happens when a Mercedes transmission module fails?

When it fails it can cause the transmission to miss shifts, remain in neutral or prevent the vehicle from starting (when park or neutral isn’t seen). There are many fault codes associated with the module when it fails, so be sure to use a Mercedes-Benz scan tool to query the control module.

What to do when your Mercedes goes into limp mode?

You may also get a check engine light if your transmission goes into limp mode. When a Mercedes-Benz goes into limp mode, it only operates in second gear and reverse only. When you put it in gear, you may also feel a bang as transmission engages. The first thing you should try is to check the transmission fluid level.

When did Mercedes Benz start using 5 speed transmission?

The 5-speed transmission that was used between 1995 up to 2008 is one of the best transmission ever built. Now let’s see if we can help you troubleshoot your transmission. By continuing to read this article you agree to use this information at your own risk. Top 5 Mercedes-Benz Transmission Problems.

What kind of transmission does a Mercedes Benz have?

What to do if your Mercedes SL Class R129 is running rough?

Check your charging system. If your engine is running rough and misfiring you may need to change your cap, rotors and wires. If your valve cover gaskets are leaking we will show you how to replace them. Engine running lean/rough. Maybe you have a vacuum leak. If you engine is only running on one bank of cylinders you may have a bad coil.

How to synchronize Mercedes Benz windows and sunroof?

Once you reach the fully open position, continue to HOLD the sunroof switch in the OPEN position until hear a click. If you don’t hear the click make sure to hold the switch for up to 5 seconds. Next, close the sunroof and again hold the switch for 5 seconds when you reach the closed position Check if the problem has been fixed.

How to reset the convertible top on a Mercedes SL500?

The SL500 comes with a variety of features, such as a retractable hardtop. This hardtop is operated by pulling up on a switch to open it, or pressing the switch down to close it. If you cannot get the hardtop to work, and the switch indicator light is flashing, it may be jammed. A jammed hardtop can be fixed by following a reset procedure.

What kind of car is the Mercedes SL500?

The Mercedes-Benz SL500, part of the SL-Class of roadsters, is a two-door car classified as a luxury grand tourer. The SL500 comes with a variety of features, such as a retractable hardtop. This hardtop is operated by pulling up on a switch to open it, or pressing the switch down to close it. If you cannot get the

What should I do about my Mercedes SL Class?

If your front bumper’s looking well past its prime give your Mercedes a fresh face with a new bumper. Should you have some DIY work to do in your engine bay, remove your hood for easy access. Over time your hood latch cable can stretch and fail to function.

How long does it take to reset adaptive shifting?

This procedure will reset the adaptive shifting points in your Mercedes-Benz automatic Transmission Control Unit (TCU). These simple do it yourself instructions take less than 5 minutes.

What does it mean when your Mercedes is stuck in Park?

Mercedes stuck in Park (P) and refuse to shift to D or N. It may be stuck in D, R, N and will not move back to Park (P). Unable to remove keys from the ignition. Unable to get Mercedes transmission into drive. Mercedes gear shift stuck in park.

What to do if your gears are stuck on a Mercedes?

If your Mercedes-Benz automatic transmission gear selector is stuck, you can be able to move the shifter from park (P) to drive (D) manually using the shifter override feature found on almost all Mercedes-Benz models including C-Class, E-Class, CL-Class, ML-Class, SLK-Class and other models.

What causes a Mercedes Benz transmission to get stuck in Park?

After establishing that the battery is fully charged, then check for a defective brake light switch or a damaged shifter module. It is a common occurrence for the Brake Light Switch to fail. It is commonly caused by the transmission stuck in Park problem.

How do you reset the ECU on a Mercedes Benz?

Once both windwos are all the way down make both swithches click by pressing them all the way down. This lets the ECU learn that that is the end of the window track and it records it in memeory. Do the same closing the windows by holding both switches and making them click once the windows are all the way up.

How does the service indicator work on a Mercedes ML320?

Every model year of the Mercedes ML320 is equipped with an on-board computer that tracks driving and engine conditions to determine when service would be needed, such as oil changes. When the computer does determine that service is needed, an indicator message appears on the control panel.

How to reset the lights on a Mercedes Benz?

To reset the lights, start up your Mercedes-Benz and turn the steering wheel all the way to the right, then all the way to the left. Do this a couple of times.

What kind of engine does Mercedes Benz R350 have?

Beauty is nothing if not matched on the inside. For every envious glance this Mercedes Benz R-Class R350 4MATIC w 3rd Row 7-Speed Automatic creates on the outside, an equal amount of joy and comfort has been crafted for those on the inside. Check out all the power, convenience and safety options that are offered on this baby.

What kind of car is the Mercedes 350?

Autotrader has 78 Used Mercedes-Benz R 350 cars for sale, including a 2007 Mercedes-Benz R 350 4MATIC, a 2008 Mercedes-Benz R 350 4MATIC, and a 2009 Mercedes-Benz R 350 4MATIC.

What kind of car is a 2011 Mercedes Benz R350?

Description: Used 2011 Mercedes-Benz R-Class R350 4MATIC with AWD/4WD, Stability Control, Auto Climate Control, Power Driver Seat, Power Liftgate/Trunk. Great Deal! Accident History: This vehicle has 1 reported accident. Number of Previous Owners: This vehicle has 2 reported owners. Usage Type: This vehicle was leased by an individual.

When did Mercedes Benz stop making the your class?

Marketed soley in North American market with the longer wheelbase, Mercedes discontinued the R-Class for North America in 2012 and other markets in 2012 — continuing production for the Chinese market only. The AMG version of the W251, R 63 AMG, was introduced at the 2006 North American International Auto Show as a 2007 model.

How much does a Mercedes Benz ABS sensor cost?

Each of the four wheels has a ABS sensor. They are not difficult to replace. A quick search online yielded many choices on Mercedes-Benz ABS sensors some as low as $30, but the actual price depends on the Mercedes-Benz Model that you have.

What does Bas ESP ABS mean on a Mercedes Benz?

What does BAS ESP ABS light mean on a Mercedes-Benz? Let’s first take a look at what each of these acronyms means. BAS stands for Brake Assist System. It provides additional braking power in case of emergency situations.

How to drive a Mercedes Benz C class car with automatic transmission?

How to drive a Mercedes Benz C-Class car with automatic transmission MB C180 Coupe DIY – YouTube The Mercedes-Benz C-Class is a line of compact executive cars produced by Daimler AG. Introduced in 1993 as a replacement for the 190 (W201) range, the C-Cla…

Why does stop start not work in reverse?

Stop-start won’t operate when reverse gear is selected or a parking aid is active. Having the wheel turned at an acute angle will prevent it working too. The system realises there’s a high chance you’re manoeuvring and will find the engine cutting out every few seconds more than a little irritating.

Why does the computer disable the stop start?

The computer knows the battery’s most important job is ensuring the engine starts. So it disables the stop-start in case the battery is drained so much the engine won’t re-start. Cars with stop-start use special batteries that can withstand constantly starting an engine.

How does the car stop start system work?

The system works with the car’s main computer. It detects when the car is stationary and out of gear (if the car’s a manual) or the brake pedal is pressed (if it’s an automatic). It then tells the car to stop delivering fuel to the cylinders.

Where are the transmission codes stored in a Mercedes?

Specific codes related to the transmission are stored in the TCU (Transmission Control Unit) and come generic codes such as P0705 are stored in ECU (Engine Control Unit). You don’t need to pay anyone to read the codes; you can retrieve them yourself in a couple of minutes with the right OBD II scanner.

What should I do if my automatic transmission slips?

WARNING: this additive should only be used in high mileage transmissions showing true signs of slipping.You should also plan on being a little more gentle with it. Avoid rapid acceleration if possible, shift manually when you can, and when starting out let the transmission fully engage before hitting the throttle.

What’s the difference between a passive and reactive Merc?

Passive: Your merc will not attack or heal anything. Reactive: Your merc will react better depending on the situation. Efficient: This stance causes your Mercenary to focus primarily on efficiency and preservation of resources. Healer mercs also have a few extra perks, what I mean by this is rezzing and buffing!

Is it safe to drive to Polebridge Mercantile?

Driving is slow and at times dangerous (because the tires lose all traction on the washboarded sections and the car bounces all over the road).. At this point the Polebridge Mercantile is the only open business — the two other cafes succumbed to the pandemic shutdown.

How long does it take to ship a Mercury top mount motor control?

Usually ships within 2 to 3 days. $ $469.98 469. 98 ( ) Includes selected options. Includes initial monthly payment and selected options. Details Shipping cost, delivery date, and order total (including tax) shown at checkout. We work hard to protect your security and privacy.

Where are the motor points on a Mercury outboard?

APPLICATION GUIDE HP SERIAL RANGE POINTS CONDENSER COIL 4 1-CYLINDER 2771622-A809600 18-5139 994-4463 336-4409A4 4.5 1-CYLINDER ALL 18-5139 994-4463 336-4528T2 6 7.5 1610265-2529894 2529895-2721150 18-5140 NLA 398-2568T1 7.5 1470349-1865778 18-5153 18-5206 18-5178

What makes a Mercedes convertible top not go down?

Mercedes convertible top won’t go down or raise 1 Convertible top pump / motor defective 2 Bad convertible top relay 3 Low fluid 4 Defective divider microswitch 5 Transmission not in Park / Neutral 6 Switch at center console is faulty 7 Convertible top fluid leak Inspect in the trunk area for hydraulic fluid leak.

What do you need to know about mercury motor control?

Produced to meet Mercury Marine original equipment manufacturer specifications to best protect your Mercury or Mariner Outboard Comfortable Grip and Smooth Action for Easy, Exacting Control in Forward, Neutral and Reverse. Neutral Lock Out Button Aids Starting and Warm Up

To reset the lights, start up your Mercedes-Benz and turn the steering wheel all the way to the right, then all the way to the left. Do this a couple of times.

How long does a Mercedes Drive Cycle take?

Lambda (02) Sensor Signal (do not interrupt this portion of the test, to be conducted directly after • Drive vehicle for 3 minutes at 70km/h (43 mph). • After the 3 minutes has been reached proceed to step 3 below.

What causes the throttle body on a Mercedes to fail?

When there are throttle body malfunctions the wrong amount of air enters into the engine causing problems with air/fuel mixture ratio. Here is a close up picture of a Mercedes throttle body. Mercedes throttle bodies made by Bosch and VDO may fail. Luckily these units are repairable.

Is there a problem with the Mercedes possition sensor?

Mercedes-Benz throttle body or throttle position sensor found on C-Class, E-Class, S-Class, CLK-Class, SLK-Class may fail causing idle issues, no idle or poor acceleration. Symptoms of defective Mercedes throttle body or throttle position sensor include: A common problem that you may notice is that the car drives fine under normal acceleration.

How to troubleshoot Mercedes Benz air suspension problems?

Learn how to troubleshoot Mercedes-Benz Air Suspension Problems. You decide to buy a Mercedes-Benz, maybe an S-Class, CLS-Class, R-Class, CL-Class or E-Class. One day you hear of other Mercedes-Benz owners having suspension problems. The next day you start having air suspension problems yourself.

What do I need to troubleshoot my Mercedes Benz?

Troubleshooting fuel related problems is not very difficult and you can check the fuel pressure yourself. Checking the fuel pressure is very simple. For this test, you will need a fuel pressure gauge. What you need is a fuel pressure gauge with Schrader valve adapter.

What does the fob remote on a Mercedes Benz do?

The newer keys have a transponder integrated in them. The key fob remote serves two purposes. First it disables the anti-theft system when you unlock the car. Second, Drive Authorization System verifies the key to make sure it is the right key to start the car.

What are the problems with a Mercedes Benz?

Top 5 Mercedes-Benz no start problems 1 Engine Click, No Start 2 Engine Dies Right After It Starts 3 Car turns over, but it won’t start 4 The car makes a clicking noise but won’t start. Hint: Starter Problem or Low Battery 5 Key will not turn the ignition More

Why is my Mercedes Benz gear shift stuck?

Gear shift stuck is one of the most common problems with Mercedes-Benz cars. Unfortunately, looking to see if the brake lights turns on while you press the brake pad, is not a good test to tell if the brake light switch is working properly.

When do Mercedes Benz motor mounts start to loose fluid?

CAUTION: Make sure no one is standing on the front or back of the car when you perform this test. Mercedes-Benz motor mounts are fluid filled instead of rubber mounts that are used on most cars. Mercedes-Benz the engine mounts start to loose fluid around the 100k mile mark.

Is there a replacement for the Mercedes SL?

However, speaking to Autocar at the Geneva motor show, Zetsche confirmed that Mercedes was working on a replacement for the SL, although he did not put a date on its launch. “We are working on a next generation of the SL ,” Zetsche said. “The plan is to make a real wow car, a stunning car.”

What are the most common Mercedes Benz transmission problems?

Top 5 Mercedes-Benz Transmission Problems. Won’t come out of Park gear due to a defective brake light switch. ( DIY How to replace the Brake Light Switch) Continue to read if you would like to learn how to troubleshoot your Mercedes-Benz transmission yourself and where you should start. 1. Check Fluid Level

What causes a Mercedes convertible top to move slow?

Mercedes Convertible top moves very slow 1 This can be caused by low fluid level or air in the hydraulic lines. 2 Air in the hydrauilc lift cylinders 3 It can be caused by binding of mechanical arms. 4 Weak convertible top lift cylinder. 5 Weak battery or ground connection. 6 Leak at the o-ring at any of the lift cylinders.

How to access Mercedes-Benz repair information step by step?

Per your requests, we are adding step-by-step instructions on how to access the vehicle maker repair information to complement our how-to-videos on the OEM Information pages. Easily reference this article by clicking the link under the video on the Mercedes-Benz OEM Information page. Update Java if needed.

How do you remove the center axle from a Mercedes Benz?

While the car is still on the ground, remove the center cap with the Mercedes-Benz logo from the wheel. This will expose the center axle shaft bolt. (Shown with the wheel removed.) Using a breaker bar and an appropriate socket, break loose and partially unbolt the center axle shaft bolt.

How do you replace a Mercedes drive shaft?

Spray penetrating oil at the joint and wait for at least 10 minutes before you try to disconnect the driveshaft. Install the new propeller shaft on reverse order. Tighten the bolts on a cross pattern to the specification. The typical torque specification is 40 Nm, but you should verify this value by calling the dealer.

Can I-car Send Me Mercedes-Benz repair procedures?

Can I-CAR send me Mercedes-Benz repair procedures? Is there a sectioning procedure available for the front lower rail? What does Mercedes-Benz say about using recycled parts?

How to change the propeller shaft on a Mercedes?

Remove the splash shield. If you are changing the front propeller shaft, remove all two splash shields as it will be more comfortable to access the propeller shaft. Locate the driveshaft bolts at the cv joint. Note that Mercedes-Benz typically uses constant velocity (CV) joints at the driveshaft and not universal joints. Remove them one at a time.

How does the locking differential work on a Mercedes?

Here sit three buttons that show four wheels, connected by lines, each with a circle in a different spot along the lines connecting the wheels. Since we already covered what the G-Class locking differential is and what it does, it is time to learn how to use the Mercedes-Benz G-Class locking differential.

What to do if you have a Mercedes transmission problem?

An advanced diagnostic scanner such as the iCarsoft or the Launch Creader listed here are a must for do-it-yourself Mercedes-Benz repair. They are affordable and can access most of the systems on your Mercedes-Benz including Airbag, EPS, ETS, Transmission, Engine, front and rear SAM, SRS, brakes and a lot more. 3.

How can I synchronize my windows on my Mercedes?

Close the winodws all the way and continue to hold the window switch in “CLOSE” position for an additional 5 seconds. Usually, you will hear a small click when the windows -resynchronize. Tried the window synchronization feature but my windows still don’t work.

How does auto close work on a Mercedes Benz?

Older Mercedes-Benz models before 1995 will most likely not have the auto close feature. They may have a micro switch on the window regulator that the window toggles on and off when it reaches the top or bottom position. When I park or turn off the car and try to close the windows, they do not go up all the way.

How to sync remote control on 1999 ML320?

Same here, my 1999 ML320 owner’s manual synchronization procedure is not working for me. 1. Turn key to position 2 then back to position 0 and remove it. 2. With in 60 sec. push the lock button and lift gate button at the same time for 15 sec. 3. Press any remote control button twice to activate the system.

How to sync the remote control on a Mercedes?

1. Turn key to position 2 then back to position 0 and remove it. 2. With in 60 sec. push the lock button and lift gate button at the same time for 15 sec. 3. Press any remote control button twice to activate the system. 1. Turn key to pos.2 and back to pos. 0 and remove it. 2. with in 60 sec. press and hold the lock all button. 3.

What’s the best way to reset transmission adaptive shifting?

Position II: You should hear two clicks and all your dash lights should turn on. Do not start the engine. Press the gas pedal all the way. By pressing the accelerator pedal to the floor, you will activate the kick down switch. Keep the gas pedal pressed all the way to down. Wait. Continue to keep the gas pedal pressed for at least 10 seconds.

What happens to the gears in a Mercedes?

In fact, some Mercedes drivers have even attempted to sue the company over failing transmissions. Over time your Mercedes transmission will accrue wear. The various parts of the transmission, including gears, linkages, cables and other components aren’t designed to last forever, and after extensive use can begin to wear out.

What makes a car shift gears in reverse?

Every automatic transmission has a valve body. This is large, maze-like component that directs the flow of hydraulic fluid to the valves. This is what allows a car to smoothly shift gears whenever the situation calls for it.

Do you need dipstick to check Mercedes transmission?

The car doesn’t come with a dipstick to check the transmission level but you can order one online for under $20. You will need Dipstick Tool for 722.6 722.9 Mercedes-Benz Transmission for measuring fluid level. Watch the video below to learn how to check the transmission fluid level on your Mercedes-Benz.

What to do if your Mercedes possition sensor is not working?

Don’t start the car. Press and hold the gas pedal for at least five seconds. Keep the pedal pressed. Turn ignition off but do not remove the key. Now release the gas pedal. Remove key. Wait a minute before you restart your Mercedes. This allows resetting the High and Low points of the gas pedal.

When do you start the car, the engine revs?

Car engine revs way up immediately upon starting engine. Q: Car engine revs way up immediately upon starting engine. When starting the engine, it sounds like you have your foot pressed to the floor on the gas pedal as soon as you start it, without even having your foot on the gas.

How to check high rev and RPM idle after start?

To check for a sticky accereration cable, disconnect the cable from the throttle lever… turn on the engine and see if the idle is normal now. While the cable is disconnected, have someone depress the gas pedal while holding the end of the cable… if it is sticky, you will notice it.

What’s the high rev rpm of a Mercedes Benz?

During drive it stays about 6-800 rpm, during park or neutral it goes up 2-2500. I noticed if I push the pedal higher, it goes up then drops down to 1000rpm. I have a feeling maybe my pedal is sticking (if that makes any sense?), should I lubricate it? What would be best to use Any ideas????

Why is my gear shift stuck in Park?

If your car passed both tests listed above, the problem may be caused by a broken, plastic part inside the shifter assembly. This plastic pieces break all the time, causing a stuck shifter. Some mechanics may simply replace the shifter assembly, which costs about $1,200.00 from the dealership.

Why does my Mercedes Benz have no acceleration?

Well, today I drove in to work and she had NO acceleration at all. I mean I would floor it and she would act like I was barely telling it to move. I tried manually shifting but all that did was provide slow acceleration at a higher RPM. She had no problem keeping an 81mph pace on the freeway.

Why is the gear selector on my Mercedes not working?

P,N,R,D gear selection indicator on dashboard not displaying correct gear. Mercedes-Benz cars that are equipped with automatic transmission have a gear selector shifter interlock safety feature. This safety feature locks the shifter in Park when you turn off the ignition.

What to do if Mercedes Benz wont shift past 1st gear?

After replacement, the code/s must be erased from the ECM (code P0715) and then also erased from the ETC Module/Trans. Control Module (codes 011-014) as previously supplied. If there is no fluid then by all means visit the mech. with the M/B scanner to narrow down which code (011-014) it is.

What does it mean when the shifter is stuck on a Mercedes?

Shifter can not be returned to Park (P), and you can’t remove the key from ignition. P,N,R,D gear selection indicator on dashboard not displaying correct gear. Mercedes-Benz cars that are equipped with automatic transmission have a gear selector shifter interlock safety feature.

Navigation