When to replace timing belt on 2002 Mazda 626?
When to replace the timing belt on a 2002 Mazda 626. The Owners Manual says to replace the timing belt at 105,000 miles for a 2002 Mazda 626. Mine has only 79,000 miles and the local mechanics want to change it now. They say the age of the car matters, and it should have been changed at 8 years.
When do I need to replace my timing belt?
We recommend that the timing belt be replaced, along with the water pump and accessory drive belts, at 90,000-100,000 miles.
When did Mazda make the move to timing chains?
Mazda made the move to timing chains in the mid-2000s, and since we won’t get into the nuts and bolts of chain replacement, you would be better served referring to your service information. I’m always saying to check your service info before you dig into an unfamiliar job. It is never more important than it is in this case.
Is it safe to remove the crank bolt on a Mazda?
Since removing the crank bolt releases the crank gear, allowing it to rotate on the shaft, the only safe way is to install the locking tools. Like any other chain, there can be some teething problems, and Mazda had some when it went to chains.
When to replace the timing belt on a 2002 Mazda 626. The Owners Manual says to replace the timing belt at 105,000 miles for a 2002 Mazda 626. Mine has only 79,000 miles and the local mechanics want to change it now. They say the age of the car matters, and it should have been changed at 8 years.
How much does a timing belt replacement cost?
The local Mazda dealer’s service manager agrees with you, so it looks like my budget will have to stretch to include a timing belt replacement package ($800 at the dealer). Big expense for a car valued at about $4,000, but less than buying a new/used car.
When to replace timing belt on Toyota Corolla?
More than likely, it will tell you that the timing belt needs to be replaced at 105k miles or 105 months, whichever comes first. (105 months=8 years and 9 months) “On most cars– for example on my Corolla – there’s a way to inspect the timing belt without taking everything apart”
Can a timing belt snap 10 minutes later?
Please ignore that suggestion, as a timing belt can look to be in perfect condition and it can snap 10 minutes later. The only thing that timing belt inspection is good for is to see if the belt is in visibly bad condition before it even gets to the specified interval for changing it.
What kind of timing belt does a Mazda 3 have?
Here is a list of timing belts and timing chains for a Mazda 3. Reference the model year with the corresponding engine to see if your car has a belt or a chain. .
We recommend that the timing belt be replaced, along with the water pump and accessory drive belts, at 90,000-100,000 miles.
Mazda made the move to timing chains in the mid-2000s, and since we won’t get into the nuts and bolts of chain replacement, you would be better served referring to your service information. I’m always saying to check your service info before you dig into an unfamiliar job. It is never more important than it is in this case.
Where is the timing light on a Mazda 626?
Shine the actual timing light on the yellow mark located on the crankshaft pulley. Observe the timing mark on the pulley and compare the timing to the degree tab located on the front of the engine. You can discontinue all operations if you are satisfied with the current ignition time, or you can proceed to the next step.
How does the idle speed control work on a Mazda 626?
Exit your Mazda 626 with the emergency brake firmly engaged and open the hood to gain access to your engine. Engage the fast idle speed control located by the idle air control valve of your engine, so that you engine will maintain its warm idle speed.
When to replace timing belt on Acura MDX?
Timing belts are replaced as part of scheduled maintenance, usually every 60,000 to 100,000 miles. Timing belts can fail before that interval is reached, but most vehicles will never have a problem with this part. If a technician notices signs of premature wear during an earlier inspection, the timing belt should be replaced early.
Since removing the crank bolt releases the crank gear, allowing it to rotate on the shaft, the only safe way is to install the locking tools. Like any other chain, there can be some teething problems, and Mazda had some when it went to chains.