Can a vacuum leak cause surging?
If an engine is not getting enough fuel (this is called “running lean”), due to fuel pressure (regulated by the fuel pump and regulator), restricted fuel injectors, a vacuum leak or really anything that throws off the fuel mixture going in to the engine, this can cause the surge.
What is the problem with the idle air control valve?
The problem may involve an annoying change (up/down) of engine speed while cruising at a steady pace, a low drop (or even cut-out) at idle or when approaching a stop, a wild high engine speed of several thousand rpm followed by a drop to near zero, etc. • Dirty/sticking IAC (idle air control valve) (P0505)
Can a cracked IAC valve cause an engine surge?
If the hose is cracked or damaged, the engine will react as though the IAC valve is faulty. Also note that Toyota and Lexus vehicles may feature a non-motorized, magnetic IAC valve, requiring periodic cleaning of the IAC air inlet. In order to isolate the issue, clear any codes, then disconnect the IAC and start the engine.
When to turn off the engine in a Mazda 6?
Warning When the engine and intake-air system are hot, they can badly burn. Turn off the engine and wait until they are cool before removing the intake-air system. Fuel vapor is hazardous. …
Can a failed IAC cause engine stalling at idle?
A problem with the IAC should throw a P0505 code. A failed/problematic IAC can cause engine stalling when off-throttle, and/or excessively high engine rpm, particularly at idle. The IAC, signaled by the ECU, controls the throttle opening at idle.
The problem may involve an annoying change (up/down) of engine speed while cruising at a steady pace, a low drop (or even cut-out) at idle or when approaching a stop, a wild high engine speed of several thousand rpm followed by a drop to near zero, etc. • Dirty/sticking IAC (idle air control valve) (P0505)
If the hose is cracked or damaged, the engine will react as though the IAC valve is faulty. Also note that Toyota and Lexus vehicles may feature a non-motorized, magnetic IAC valve, requiring periodic cleaning of the IAC air inlet. In order to isolate the issue, clear any codes, then disconnect the IAC and start the engine.
A problem with the IAC should throw a P0505 code. A failed/problematic IAC can cause engine stalling when off-throttle, and/or excessively high engine rpm, particularly at idle. The IAC, signaled by the ECU, controls the throttle opening at idle.
Why is the FITV valve on my Honda engine sticking?
If you continue to obtain different readings with the throttle released, suspect a sticking throttle shaft or faulty TPS. As another example, Honda engines (I believe 1996 and later) feature a FITV (Fast Idle Thermo Valve) that’s located directly under the throttle body. This valve is prone to sticking.