What kind of engine does a Mazda 626 have?

A 2.0 liter DOHC 16 valve four-cylinder engine with 130 horsepower and 135 lbs-feet torque powers up the Mazda 626 LX Sedan, while the LX V6 and EX V6 models is cranked up with a more powerful 2.5 liter DOHC 24-valve V6 engine. Transmission available includes a five-speed manual and a four-speed automatic option.

Is the Mazda 626 considered a domestic car?

This happened after Mazda ceased importing the 626 from Japan and started the production of the model in the U.S. Approximately 75% of the 626’s components were sourced locally, thus the model became considered as a domestic automobile according to Federal standards. The Mazda 626 is a certified movie and television star.

Why does my Mazda 626 make a knocking noise?

There are times when third-generation Mazda 626s would generate knocking noises that come from the suspension. The noises can usually be heard while driving over a speed bump or taking a sharp turn. Needless to say, this problem can be quite annoying. Fortunately, it can be easily solved by installing a rubber spring seat.

The GT model had a 2.0-litre FE-DOHC engine that produced 148 (non-cat) or 140 PS (cat). Some models were available with a new 2.0 diesel RFT engine, notable for its use of a pressure wave supercharger (Comprex), that previously could be found in the Mazda Bongo commercial.

What’s the problem with my 1993 Mazda 626?

This letter came in and tells the story very well: I am currently having some car trouble with my 1993 Mazda 626. The car is idling very rough, as if not enough gas is reaching the motor because it feels as though it wants to turn off. I constantly have to keep giving it gas.

What to do if your Mazda 626 has a leak?

Check all the vacuum lines, and make sure they are in good shape and connected properly. Check the PCV hose and lines also. In addition, check the large air intake hose from the Air Flow Meter to the intake manifold for cracks and leaks. They often crack in the valleys and are hard to spot.

When did the Mazda 626 get 4 wheel steering?

The 1988 introduction of four-wheel steering to the 626 Turbo lift back, along with Honda’s Prelude 4WS, marked the first 4WS systems for the US market. It was later also made available to the MX-6.

For power, the LX and ES feature a 2.0-liter four-cylinder engine producing 130 horsepower and 130 foot-pounds of torque. LX and ES cars fitted with the 2.0-liter engine qualify as ultra-low-emission vehicles. The 2.5-liter V6 puts out 170 horsepower and 163 foot-pounds of torque.

What are the HVAC controls on a Mazda 626?

HVAC controls are easy enough for a 4-year-old to use, with two large knobs for fan speed and temperature, and two rows of push buttons to control venting, air circulation and air conditioning. Seating is spacious for its class, but front passengers will be disappointed with the lack of lumbar support and headroom.

Is the 2001 Mazda 626 a good car to buy?

Edmunds’ expert review of the Used 2001 Mazda 626 provides the latest look at trim-level features and specs, performance, safety, and comfort. At Edmunds we drive every car we review, performing road tests and competitor comparisons to help you find your perfect car. Read the full in-depth review of the Used 2001 626 at Edmunds. Popular searches

What kind of wheels does a Mazda 626 have?

The Mazda comes in four trim levels: LX, LX-V6, ES and ES-V6. While by no means visually exciting, the 626 still manages to be an attractive sedan. LX and ES models have 15-inch wheels as standard, and the ES-V6 gets 16-inch wheels.

The 626 is offered as a four-door sedan with 2 engine options; a 2.0-liter, 125-hp 4-cylinder or a 2.5-liter, 170-hp V-6. Also choose between a 5-speed manual or a 4-speed automatic.

When did the Mazda 626 get a facelift?

The 626 was facelifted in November 1980, with the update bringing flush-fitting headlamps and a new grille insert. Other changes included redesigned tail-lights, a revised dash, new trim and improved dynamics. The grille was lengthened slightly to remove the body-colored gap between the headlamps and grille on the original model.

What kind of engine does a Mazda 616 have?

This generation was sold in export markets as the Mazda 616 in sedan and, for some markets, coupé configurations. There was also a Mazda 618 briefly sold in the United States. An optional Mazda Wankel engine was offered and known as the Capella Rotary in Japan or the Mazda RX-2 for export.

A redesign of Mazdas midsize, front-drive, four-door sedan could arrive for the 2003 model year possibly as a larger model and accompanied by a wagon. The 626 has few changes for 2002; it carries on with a 2.0-liter four-cylinder engine or a 2.5-liter V-6 and comes with either a manual or automatic transmission.

When was the last year the Mazda 626 was redesigned?

The 626 was last redesigned for the 1998 model year, when it reached true midsize proportions at that time. With a wheelbase that stretches to just over 105 inches, the 626 sedan measures 187.4 inches long overall just slightly shorter than the Honda Accord and Toyota Camry. The 626 is 69.3 inches wide and 55.1 inches tall.

How big is the back of a Honda 626?

With a wheelbase that stretches to just over 105 inches, the 626 sedan measures 187.4 inches long overall just slightly shorter than the Honda Accord and Toyota Camry. The 626 is 69.3 inches wide and 55.1 inches tall. Seating five occupants, the 626 has front buckets and a three-place rear bench with a split, folding rear seatback.

What kind of maintenance does a Mazda 626 need?

Must be maintained “by the book”. I do the light maintenance myself. Minor delays to get parts. the radio/ cd player that came with the car sucked!. i replaced the radio for $200 and am happy. Minor issue with the cruise control not working — but making sure everything plugged in and grounded seems to have solved problem.

I have 1999 Mazda 626, i4, 2L engine. It is stick shift. When I try to start the car, engine makes cranking sound on turning key but does not fire up. After doing the same thing, cranking for 8-10 times it fires up and then car rolls just normal. After the engine is fired up it do not have any problem.

Why does my Mazda 626 shake when idling?

I’ve got a 1999 Mazda 626 that shakes really badly when idling. It gets a little better when put into neutral, but not much. I’ve had two people suggest possibilities: This started happening in the last year or so. It started out being a mild shake when stopping at a stop light, but in the past 6 months or so it’s any time the car is not moving.

What to do when your Mazda 626 wont start?

This usually needed only in cases when the car has been off for 8 or more hours. It is the check valve inside the fuel pump. Just turn on and do not crank it for a few (6-8) seconds, then crank it, by that time the pump will have filled the line and it will start like magic! Justfixit, you may want totry what pscantlin did in response no. 14.

How to diagnose an air leak in a Mazda?

To diagnose it is simple too, spray where the intake manifold joins the engine with a can of “jump start” or similar and if the idle picks up you have an air leak. Mazda’s are prone to fault here.

What kind of transmission does a Mazda 626 have?

I have a 2002 Mazda 626 been driving it a year the car runs great,but the other day the car started jerking felt like the transmission.The Overdrive light comes on evevery time it jerks could someone please help me.

What happens when the light goes on on a Mazda 626?

When the light goes on, it enters a Fail-Safe mode (the EPC solenoid opens up and brings line pressure up to ‘max’) the only catch is it raises the fluid pressure well beyond normal specs (it goes from 100 to 400 PSI). It is at this time where you get your major failures.

How much does a transmission cooler cost on a Mazda 626?

Keep in mind that once your car goes in safe mode, your transmission fluid will get burnt up real fast. A transmission cooler cost about 40-50 bucks, and will extend the life of the poorly designed Mazda/Ford transmission.

With a twist of the key, the 626’s 175-horsepower, 2.5-liter V6 engine growls to life, and when we say growl, we mean growl. Depress the accelerator pedal and 24 valves sing the sweet song of DOHC power. And how sweet it is.

What’s the value of a 2000 Mazda 626?

There aren’t any 2000 Mazda 626 for sale near you. 2000 Mazda 626 appraisal values can range from $336 – $1,417. Find out what your car is really worth in minutes.

What’s the name of the new Mazda wagon?

·Introduces all-new Mazda Capella Wagon (626 Wagon / 626 Station-Wagon) The wagon offered a comfortable space based on “people first” philosophy. The wheelbase was extended and height raised, increasing not only luggage space but cabin space too.

Are there any repairs on a Mazda 626?

Yes, 293K miles, and the only major repairs were: replaced the clutch ($400), replaced front right axle ($80 part), and did other regular maintenance, like battery, tires, oil changes etc. The rear spoiler did seperate about 10K miles ago and the headliner inside the car ripped and

The Mazda 626 badge was used for the first time in some markets, replacing the earlier “616”. The 626 was typically fitted with the 1.6- or 2.0-liter version of the Mazda F/MA, which produced from 75 to 90 PS (55 to 66 kW). The 626 was facelifted in November 1980, with the update bringing flush-fitting headlamps and a new grille insert.

When did the Mazda Capella come out in the US?

The Mazda Capella, also known as the 626 In North America, is a mid-size car that was manufactured by Mazda from 1970 to 2002. Sold in the Japanese domestic market under the Capella name, the vehicle was also commonly known in other major markets as the Mazda 626.

When did Mazda add Wankel engine to Capella?

An optional Mazda Wankel engine was offered and known as the Capella Rotary in Japan or the Mazda RX-2 for export. In addition to the 1.6, a Capella 1500 was added in October 1970. The Capella received a fairly thorough facelift in February 1974.

What was the model year of the Mazda 626?

For 1992, the most significant change in the Mazda 626 was the discontinuation of the GT touring hatchback, which was suffering from slow sales. Other than that, the model remained largely unchanged. The 1992 Mazda 626 came in a number of trims, including the base DX sedan and the midrange LX sedan and hatchback.

How much horsepower does a Mazda 626 GLX have?

The Mazda 626 GLX is a European and Asian only trim level of the Mazda 626 not produced or sold in North America. It is Japanese-made, with a 2.0-liter four-cylinder DOHC-engine and a four-speed automatic transmission, which produces 125 hp (93 kW) at 6,000 rpm and 133 lb·ft (180 N·m) at 4,000 rpm.

What kind of diagnostics do I need for a Mazda 626?

This article covers both MECS-II (OBD-I) & EEC-IV diagnostics for 1993-1995 Mazda 626, Mazda MX-6, Ford Probe, and other vehicles. You will need to figure out if you have either MECS-II or EEC-IV to get the most out of this article.

How do you install a fuel pump on a Mazda 626?

Slide the fuel tank and shield from under the vehicle. Squeeze the plastic quick connectors securing the fuel tank lines to the fuel pump inlet and outlet hoses, then disconnect the fuel tank hoses from the fuel pump. Remove the screws securing the fuel pump to the fuel tank with the ratchet and bit-driver attachment.

Are there workshop manuals for the Mazda 626?

The workshop manuals are intended for owners of Mazda 626, employees of service stations.

Is the Mazda 626 a 50 state car?

The 626’s interior gains a new modular audio system, a new rear deck with child safety-seat anchors and an internal emergency trunk release. Mazda has also made EZ-Kool glass standard on all models and side airbags a stand-alone option on models with a V6 and automatic transmissions. All 626s are now 50-state emission compliant.

The 2.0-liter four-cylinder engine standard on both models gains 5 horsepower this year to 130; the optional 2.5-liter V-6 remains with 170 horsepower. Both engines are available with manual or automatic transmissions.

How often should you change the air filter on a Mazda 626?

The engine air filter in your 2000 Mazda 626 cleans the air that enters your engine. You should change the filter on your 626 at least once a year or every 20,000 miles, whichever comes first. If you drive in dusty or sandy conditions, you should change your filter more frequently.

Are there side impact airbags on the Mazda 626?

Side-impact airbags for the front seats are a new option on the 626, Mazda’s midsize sedan. The side airbags are packaged with anti-lock brakes as an option available on all models. Ford owns a controlling interest in Mazda and builds the 626 at a plant the two share near Detroit. However, the 626 was designed in Japan and uses Mazda engines.

The Mazda 626 becomes simply known as the Mazda6 for 2003. Wider and taller than its predecessor, the 2003 Mazda6 sedan is offered with a four-cylinder or a V-6 engine choice.

How many miles can a Mazda 6 last?

This clever bit of under the hood engineering helps the luxurious Mazda 6 last for 250,000 miles with routine maintenance.

What kind of engine does a Mazda 6 have?

The 2019 Mazda 6 features a turbocharged SKYACTIVE-G 2.5T engine with a 6-speed transmission that delivers only what drivers need in an acceleration event without playing the ‘transmission game’ throttling up and down. This clever bit of under the hood engineering helps the luxurious Mazda 6 last for 250,000 miles with routine maintenance.

What kind of car is a 2003 Mazda?

If a sporty minivan exists, it is the 2003 Mazda MPV which seats seven passengers and has a 200 hp 3.0L V6 under the hood. The 2003 Mazda MX-5 Miata is a two-passenger compact convertible sports car that packs a surprisingly potent punch in its punitive package.

When did the Mazda 616 get double headlamps?

From 1972 all models received the double headlamps. The taillight design was changed repeatedly over the production run. This generation was sold in export markets as the Mazda 616 in sedan and, for some markets, coupé configurations. There was also a Mazda 618 briefly sold in the United States.

What can I do with a Mazda 626 body kit?

Mazda 626 Body Kits are considered one of the most effective ways to modify the look of your vehicle. You can buy a body kit to make your plain vanilla Honda Civic look like a sporty high-end BMW M3. You can make your Mustang look like an in-your-face rally car with huge foglights and a ‘Big Mouth’ style front bumper.

What was the problem with my Mazda 626?

Minor delays to get parts. the radio/ cd player that came with the car sucked!. i replaced the radio for $200 and am happy. Minor issue with the cruise control not working — but making sure everything plugged in and grounded seems to have solved problem.

Where does Ford build the Mazda 626 car?

Ford owns a controlling interest in Mazda, and the 626 is built at a plant near Detroit that the two companies share. Designed in Japan, the sedan uses Mazda engines, and its front-drive platform also serves as the basis for the compact Mazda Tribute and Ford Escape sport utility vehicles.

When was the last redesign of the Honda 626?

Is the Mazda MPs the same as the 626?

The MPS looked very much like the 626 as it boasted of the model’s trademark exterior and interior features. The grille, headlights, the gauges, and the air-conditioning vents were all reminiscent of the old 626. Basically, it was a sleeker and more stylish version of the model.

What kind of engine does Mazda 626 IV 2.5 have?

The Mazda 626 IV 2.5 V6 has a V 6, Petrol engine with 2497 cm3 / 152.4 cu-in capacity. How many horsepower (hp) does a 1991 Mazda 626 IV 2.5 V6 have?

What kind of braking system does a Mazda 626 have?

For stopping power, the 626 IV 2.5 V6 braking system includes Vented Discs at the front and Discs at the rear. The 626 IV model is a Hatchback car manufactured by Mazda, with 5 doors and – seats, sold new from year 1991 to 1995, and available after that as a used car.

When did Mazda stop making the Mazda 626?

In Columbia, the Mazda 626 continued to be manufactured until 2006. 2002 wouldn’t have been the final year of the Mazda 626 had the plans for the Mazda Performance Series (MPS) pushed through. The MPS looked very much like the 626 as it boasted of the model’s trademark exterior and interior features.

What kind of seats does the Mazda 626 LX have?

The 626 LX has a five passengers seating capacity with sports cloth seats, power window and door locks, plus the comfort of air condition for hot summers, while the 626 ES contains sports premium cloth upholstery, white gauges and silver inner door handles.

When did the Mazda Capella come out in Japan?

Mazda Capella. The Mazda Capella is a mid-size car that was manufactured by Mazda from 1970 to 2002. Sold in the Japanese domestic market under the Capella name, the vehicle was also commonly known in other major markets as the Mazda 626.

When did the Mazda 626 IV come out?

The 626 IV model is a Hatchback car manufactured by Mazda, sold new from year 1991 until 1995, and available after that as a used car. McPherson struts. Coil springs. Anti-roll bar. What engine is in Mazda 626 IV 2.5 V6? The Mazda 626 IV 2.5 V6 has a V 6, Petrol engine with 2497 cm3 / 152.4 cu-in capacity.

What’s the price of a 2002 Mazda 626?

The Mazda 626 is a sedan. Inventory prices for the 2002 626 range from $1,724 to $6,500. It gets EPA-estimated 24-29 MPG combined. No listings at this time. Get the latest resale value.

What is the top speed of a Audi 626?

With a fuel consumption of 9.5 litres/100km – 30 mpg UK – 25 mpg US (Average), 0 to 100 km/h (62mph) in 8.5 seconds, a maximum top speed of 137 mph (220 km/h), a curb weight of 2690 lbs (1220 kgs), the 626 IV 2.5 V6 has a naturally-aspirated V 6 cylinder engine, Petrol motor.

What kind of transmission did a Mazda Capella have?

The coupé and sedan were mechanically identical, with front MacPherson struts and a coil sprung solid axle at the back mounted on four links with a transverse Panhard rod providing addition location. Either a five-speed manual or three-speed automatic transmission and recirculating ball steering completed the mechanical specification.

Where was the Mazda RX-2 rotary engine made?

This was the only generation that had the rotary engine offered. The RX-2 was assembled under contract in New Zealand from 1972 for Mazda New Zealand by Motor Industries International in Otahuhu, South Auckland.

How much horsepower does a Mazda L engine have?

At this time, Ford will be the only manufacturer still using the Mazda L-engine design. The 1.8 L (1,798 cc (109.7 cu in)) version has a nearly- square 83 mm (3.27 in) bore and a 83.1 mm (3.3 in) stroke. Output is 125 hp (93 kW) at 6000 rpm with 122 lb⋅ft (165 N⋅m) of torque at 4250 rpm.

When did the last Mazda 626 come out?

The final Mazda 626 rolled off the Flat Rock, Michigan assembly plant on August 30, 2002 but in Colombia they were still being produced until 2006. Get notified for new files? We’ll send you a quick email when a new Mazda 626 document is added. Spam free, max one email a month.

Is there a free repair manual for a Mazda 626?

Every Manual available online – found by our community and shared for FREE. Enjoy! The Mazda Capella is a mid-size car that was manufactured by Mazda Motor Corporation from 1970 to 2002. Sold in the Japanese domestic market under the Capella name, the vehicle was also commonly known in other major markets as the Mazda 626.

The 626 was typically fitted with the 1.6- or 2.0-liter version of the Mazda F/MA, which produced from 75 to 90 PS (55 to 66 kW). The 626 was facelifted in November 1980, with the update bringing flush-fitting headlamps and a new grille insert. Other changes included redesigned tail-lights, a revised dash, new trim and improved dynamics.

What kind of oil do you use in a Mazda?

Mazda Original Oils are specially designed/tested for the respective engine. For optimum performance we recommend to use Mazda Original Oils at all times. If you are unable to find a Mazda Original Oil, alternative oils meeting the listed specification may also be used. Use API SM/SN in Kazakhstan.

Navigation