How do you turn off high beams on a Mazda 3?
Turn on/off auto high beam
- To enable or disable auto high beam, from the home screen go to Settings.
- Select the Vehicle tab.
- Then select Lighting.
- Then scroll down to High Beam Control.
- Select the box next to High Beam Control to enable the feature, de-select the box to disable it.
How do you turn on high beams on a Mazda 3?
Switch the headlight switch to the position, or press the high beam control switch. The HBC indicator light (green) turns off. If the HBC is turned off using the high beam control switch, press the high beam control switch again to turn the HBC back on.
How do you turn off the lights on a Mazda 3?
Turn the headlight switch to turn the headlights and other exterior lights on or off. When the lights are turned on, the lights-on indicator light in the instrument cluster turns on. If the light switch is left on, the lights will automatically switch off approximately 30 seconds after switching the ignition off.
How do you turn on a Mazda 3?
The engine starts by pressing the push button start while depressing the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle). To switch the ignition position, press the push button start without depressing the pedal. Do not leave the ignition switched ON while the engine is not running.
What is the high beam control system on a Mazda 3?
Mazda 3 Owners Manual: High Beam Control System (HBC) The High Beam Control System (HBC) determines the conditions in front of the vehicle using the Forward Sensing Camera (FSC) while driving in darkness to automatically switch the headlights between high and low beams.
Where do I change the light bulbs on my Mazda 3?
The bulbs must be replaced at an Authorized Mazda Dealer. If you are changing the right bulb, start the engine, turn the steering wheel all the way to the left, and turn off engine. If you are changing the left bulb, turn the steering wheel to the right, and turn off engine. Make sure the headlight switch is off.
Where is the adjustment bolt on a Mazda 3?
Open the hood of the car and locate the adjustment bolt on the back of the headlight housing assembly. Turn the headlight adjustment bolt until the headlight beam shines at the base of the wall or other flat surface near the ground. Ideally, you want the headlights to shine where the headlight beam meets the ground.
How long does it take to adjust headlight on Mazda 3?
This bolt will allow the only adjustment available on the Mazda 3. Adjusting your Mazda 3’s headlights is necessary whenever you replace the housing assembly. If you’ve never done this job before, it may take you 20 to 30 minutes.
Can you replace a headlight bulb on a Mazda 3?
The AUXITO staff has taken all its Mazda 3 headlight bulb replacement guide, Mazda 3 light bulb size guides, Mazda 3 light bulb replacement guides and cataloged them online for use by our visitors for free.
How do you adjust the headlight aiming on a Mazda 3?
The reflectors for the low and high beams are an integrated unit. Therefore, perform the headlight aiming adjustment on only the low beam. 1. Point the headlight beams to a wall and verify that the headlight beams are as shown in the figure. 2. Make a screen as shown in the figure using double-weight, white paper.
What should I do if my Mazda warning light turns off?
There is no problem if the light turns off, however if the light does not turn off or turns on/flashes again, consult an Authorised Mazda Repairer. The details for some warnings can be viewed on the centre display.
Is it dangerous to drive with a Mazda brake light on?
Contact an expert repairer, we recommend an Authorised Mazda Repairer to have the brakes inspected as soon as possible: Driving with the brake system warning light illuminated is dangerous. It indicates that your brakes may not work at all or that they could completely fail at any time.