How to install Mega squirt PNP on MX-5?
Protective Panel next: 5 bolts are holding it, 3 on the bottom and 2 up top. First, pop the strap that holds the harness to the car, then you can pull the ECU out of its cradle. Next unplug the 2 plugs, a little flathead screwdriver will help. Then put the old ECU in a safe place, just in case. Next, plug in the new ECU Mega Squirt PNP.
What should the sequential injection be on a Miata?
“Sequential Injection” can run 14.7:1. Now start your engine and let it fully warm up, now check your AFR gauge, try to get the AFR that is right for your injection method and your engine. If you are too lean use higher number in the fuel idle cells. If you are too rich use lower number in the fuel idle cells.
What should the idle speed be on a Miata?
Open your “Ignition Table 1 (Spark Advance)”, your normal idle should be around 30kpa (no ac, no lights, no stereo etc…) “Batch Injection” cars will need to run idle a little rich even <14:1. “Sequential Injection” can run 14.7:1.
What are the features of the mspnp2 engine?
The MSPNP2 includes a very impressive feature set allowing you to convert a distributor based engine to distributorless ignition and sequential or semi-sequential fueling! It includes four Peak and Hold fuel injector drivers allowing for use of high-impedance (hi-z) or low-impedance (low-z) injectors.
Protective Panel next: 5 bolts are holding it, 3 on the bottom and 2 up top. First, pop the strap that holds the harness to the car, then you can pull the ECU out of its cradle. Next unplug the 2 plugs, a little flathead screwdriver will help. Then put the old ECU in a safe place, just in case. Next, plug in the new ECU Mega Squirt PNP.
What is the base map for a Miata?
Standard Base Map for a near stock car with the AFM in place. (029v) Standard Base Map for a near stock car with the AFM removed. (029v) Tuning Software: MSPNP_Setup_021108.exe MSPNP_MM9495_Base_Map_101007.msq Tuning Software: MSPNP_Setup_021108.exe Initial Release MM9697 Base Map for the 1996-1997 Miata. (HR10e)
What is the tuning software for a Miata?
Tuning Software: MSPNP_Setup_021108.exe Standard Base Map for a near stock car with the AFM in place. (029v) Standard Base Map for a near stock car with the AFM removed. (029v) Tuning Software: MSPNP_Setup_021108.exe MSPNP_MM9495_Base_Map_101007.msq Tuning Software: MSPNP_Setup_021108.exe Initial Release MM9697 Base Map for the 1996-1997 Miata.
Do you need serial to USB adapter for Megasquirt Miata?
You must select an option for ‘version’. You must select an option for ‘Air Flow Meter options’. You must select an option for ‘Serial to USB adapter’. Built to order.