How do you bleed the clutch on a 2004 STI?
Take the cap off the clutch master cylinder and top off the fluid. Find the slave cylinder underneath the car and when you have someone pump the pedal and hold it down, open up the bleeder nipple a little bit and the close it. Repeat process until you feel a nice firm prressure on the pedal.
What does it mean to bleed a clutch?
Bleeding the clutch is a process in which you remove all the fluid currently in the system, getting out all the liquid and air, and replacing it with purely liquid.
What’s the best way to bleed a clutch?
Now you need to pump the clutch pedal, and for this, you can take the help of a friend. Tell him to pump the clutch pedal 10 to 15 times, and after that, tell them to hold the clutch pedal completely down. While the clutch pedal is still down, it is time to open the bleeder using the line wrench.
When do you close the bleeder valve on a clutch?
Close the bleeder valve when you see no more air bubbles in the fluid; release the clutch pedal as well. You would need to have another person as this operation can’t be done alone. Finally, it is time to test the clutch once the slave cylinder has been bled.
What happens when you bleed the slave cylinder on a clutch?
As more air is bled out and hydraulic pressure builds, the clutch pedal will come up on its own. Warning: While bleeding the slave cylinder, never let the fluid level in the clutch master cylinder get too low or you will suck air into the hydraulic system and the process will have to be started over.
How is the brake fluid connected to the clutch?
It is connected to the clutch slave cylinder through hoses. When you push the clutch pedal, brake fluid flows from the clutch master cylinder to the slave cylinder, applying the pressure necessary to move (engage) the clutch and this in turn changes the gears on your manual transmission.
How do you Bleed a clutch master cylinder?
Warning: While bleeding the slave cylinder, never let the fluid level in the clutch master cylinder get too low or you will suck air into the hydraulic system and the process will have to be started over. Open the bleeder valve – Use a line wrench to open the bleeder valve to the slave cylinder.
Where is the bleeding valve on a clutch?
Pour the fluid into the clutch master cylinder. Locate the slave cylinder – On most vehicles, it will be bolted externally on the transmission. In others the slave cylinder is inside the transmission but the bleeding valve can be easily accessed on the outside.
What should I do if I Bleed my Clutch?
Use a hand-operated vacuum pump to bleed a clutch. If you feel a change in the way the clutch pedal feels when stepping on it, or if the clutch pedal stays down, or if you find leaked brake fluid inside your car, you should have a mechanic inspect the clutch master cylinder and replace it if needed.
Where is the bleeder line on a Chevy truck?
The slave cylinder is located on the backside of the engine on most Chevy trucks near the transmission and clutch assembly. This cylinder pumps fluid to the clutch assembly for engagement and disengagement. Fit the clutch bleeder line over the end of the valve on the clutch slave cylinder. Place the clutch bleeder line into the catch pan.